Misplaced Pages

Honeycomb mirror

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
The un-coated backup primary mirror for the Hubble Space Telescope showing its honeycomb structure.

A honeycomb mirror is a large mirror usually used as the primary mirror in astronomical reflecting telescopes whose face is supported by a ribbed structure that resembles a honeycomb. The design provides sufficient rigidity for ultra-high-precision optics while reducing the weight of the mirror. The reduced weight, in turn, allows smaller, lighter support and control structures, reducing the overall cost of the telescope. The term may also refer to mirrors made up of a coordinated set of individual hexagonal mirrors.

The development of the honeycomb mirror has allowed the creation of larger instruments than would be feasible with solid mirrors. Solid mirrors are not only mechanically cumbersome, but are also difficult to cast and safely cool into a single, large blocks of glass. Honeycomb designs can reduce the weight of the mirror by as much as 80%.

The bending stiffness of a honeycomb mirror is given by:

D = E ( h + t ) t 2 2 ( 1 − ν 2 ) {\displaystyle D={\frac {E(h+t)t^{2}}{2(1-\nu ^{2})}}}

where E is Young's modulus, h is the thickness of the honeycomb core at the center, and t is the thickness of the upper and bottom plates. The weight of a honeycomb mirror compared to a solid mirror is:

2 t + α h 2 t + h {\displaystyle {\frac {2t+\alpha h}{2t+h}}}

where α, being significantly less than 1, is the relative density of the core compared to the face plate.

See also

References

  1. "Mirror, Primary Backup, Hubble Space Telescope". National Air and Space Museum. Archived from the original on 2013-11-04. Retrieved 2008-04-26.
  2. Martin, H.M. (September 9, 2019). "Making mirrors for giant telescopes". In Hallibert, Pascal; Hull, Tony B.; Kim, Dae Wook (eds.). Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems II. Vol. 11116. pp. 150–165. Bibcode:2019SPIE11116E..0JM. doi:10.1117/12.2534601. ISBN 9781510629257. {{cite book}}: |journal= ignored (help)
  3. Cheng, Jingquan (2009). The Principles of Astronomical Telescope Design. Springer New York. p. 106. ISBN 9780387887913.


Stub icon

This telescope-related article is a stub. You can help Misplaced Pages by expanding it.

Stub icon

This optics-related article is a stub. You can help Misplaced Pages by expanding it.

Categories: