| Development | |
|---|---|
| Location | United States |
| Year | 1987 |
| Builder(s) | Hunter Marine |
| Name | Hunter 33.5 |
| Boat | |
| Displacement | 11,000 lb (4,990 kg) |
| Draft | 4.50 ft (1.37 m) |
| Hull | |
| Type | Monohull |
| Construction | Fiberglass |
| LOA | 33.33 ft (10.16 m) |
| LWL | 26.83 ft (8.18 m) |
| Beam | 10.92 ft (3.33 m) |
| Engine type | Diesel inboard motor |
| Hull appendages | |
| Keel/board type | fin keel |
| Ballast | 4,500 lb (2,041 kg) |
| Rudder(s) | internally-mounted spade-type rudder |
| Rig | |
| Rig type | B&R rig |
| I foretriangle height | 39.16 ft (11.94 m) |
| J foretriangle base | 11.67 ft (3.56 m) |
| P mainsail luff | 43.16 ft (13.16 m) |
| E mainsail foot | 13.50 ft (4.11 m) |
| Sails | |
| Sailplan | Fractional B&R rigged sloop |
| Mainsail area | 291.33 sq ft (27.065 m) |
| Jib/genoa area | 228.50 sq ft (21.228 m) |
| Total sail area | 519.83 sq ft (48.294 m) |
| Racing | |
| PHRF | 147 (average) |
| [edit on Wikidata] | |
The Hunter 33.5 is an American sailboat that was designed for cruising and first built in 1987.
The Hunter 33.5 design was developed into the Moorings 335 in 1988, as a charter version for Moorings Yacht Charter.
Production
The design was built by Hunter Marine in the United States, but it is now out of production.
Design
The Hunter 33.5 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop B&R rig, a raked stem, a walk-through reverse transom, an internally-mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces 11,000 lb (4,990 kg) and carries 4,500 lb (2,041 kg) of ballast.
The boat has a draft of 4.50 ft (1.37 m) with the standard keel fitted. It was also available with a bulb wing keel, an elliptical wing keel or a Collins tandem keel.
The boat is fitted with a diesel engine. The fuel tank holds 42 U.S. gallons (160 L; 35 imp gal) and the fresh water tank has a capacity of 56 U.S. gallons (210 L; 47 imp gal).
The design has a PHRF racing average handicap of 147 with a high of 156 and low of 141. It has a hull speed of 6.96 kn (12.89 km/h).
Operational history
Yacht designer Robert Perry wrote a review of the design in 2000 for Sailing magazine. He described the boat as, "The sailplan shows this to be a handsome design with, by today's standards, moderate freeboard, short ends and a clean wedge-shaped house. Initially, I was struck by the tall fractional rig." He concluded, "The basic hull shape is pretty conservative. The stern is broad to help with sailing length, cockpit size and accommodations aft, although not necessarily in that order. I like the short bow overhang."
See also
Related development
Similar sailboats
- Abbott 33
- Arco 33
- C&C 3/4 Ton
- C&C 33
- C&C 101
- C&C SR 33
- Cape Dory 33
- Cape Dory 330
- CS 33
- Endeavour 33
- Hans Christian 33
- Hunter 33
- Hunter 33-2004
- Hunter 336
- Hunter 340
- Marlow-Hunter 33
- Mirage 33
- Nonsuch 33
- Tanzer 10
- Viking 33
- Watkins 33
References
- ^ Browning, Randy (2018). "Hunter 33.5 sailboat specifications and details". sailboatdata.com. Archived from the original on 5 April 2022. Retrieved 26 November 2018.
- ^ McArthur, Bruce (2022). "Hunter Marine". sailboatdata.com. Archived from the original on 30 July 2020. Retrieved 5 April 2022.
- InterVisionSoft LLC (2018). "Sailboat Specifications for Hunter 33.5". Sailing Joy. Archived from the original on 27 November 2018. Retrieved 2 November 2018.
- Perry, Bob (13 September 2000). "Perry Design Review: Hunter 33.5". Archived from the original on 5 April 2022. Retrieved 26 November 2018.
| Hunter Marine sailboats | |
|---|---|
| Hunter series |
|
| Marlow-Hunter series | |
| Edge series | |
| Legend series | |
| Moorings series | |
| Passage series | |
| Quest series | |
| Vision series | |
| Xcite series | |
| Other boats | |