Misplaced Pages

IP in IP

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Internet protocol suite
Application layer
Transport layer
Internet layer
Link layer

IP in IP is an IP tunneling protocol that encapsulates one IP packet in another IP packet. To encapsulate an IP packet in another IP packet, an outer header is added with Source IP, the entry point of the tunnel, and Destination IP, the exit point of the tunnel. While doing this, the inner packet is unmodified (except the TTL field, which is decremented). The Don't Fragment and the Type Of Service fields should be copied to the outer packet. If the packet size, including the outer header, is greater than the Path MTU, the encapsulator fragments the packet. The decapsulator will reassemble the packet.

IP packet encapsulated in IP packet

IP in IP Encapsulation
Outer IPv4 header
Offset Octet 0 1 2 3
Octet Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
0 0 Version (4) IHL DSCP ECN Total length
4 32 Identification Flags Fragment offset
8 64 Time to Live Protocol (4) Header checksum
12 96 Source address
16 128 Destination address
20 160 (Options) (if IHL > 5)
56 448
60 480 Encapsulated IP packet (TTL decremented, but unaltered otherwise)
64 512

Outer IP header has the following fields:

Version: 4 bits
This field is the Internet Protocol version number. Set to 4 to indicate IPv4.
Internet Header Length (IHL): 4 bits
This field is the length of outer IP header.
Differentiated Services Code Point (DSCP): 6 bits
This field is copied from the inner IP header.
Explicit Congestion Notification (ECN): 2 bits
This field is copied from the inner IP header.
Total Length: 16 bits
This field is the length of the encapsulated IP packet (including Outer IP Header, Inner IP Header, IP Payload).
Identification: 16 bits
This field is used to identify the fragments of a datagram which will be helpful while reassembling the datagram as the encapsulator might fragment the datagram. For the Outer IP Header, a new number is generated.
Flags: 3 bits
There are three flags defined within this field.
Reserved (R): 1 bit
Reserved. Should be set to 0.
Don't Fragment (DF): 1 bit
This field specifies whether the datagram can be fragmented or not. If this bit is set to 1 in the inner header, then the outer header also have this bit set to 1 saying that this datagram cannot be fragmented. If this bit is set to 0 in the inner header, then the outer header may set to 0 or 1.
More Fragments (MF): 1 bit
This field is required when the datagram is fragmented saying whether the datagram contains some more fragments. This field is not copied from inner header.
Fragment offset: 13 bits
This field is used while reassembling the fragments.
Timo To Live (TTL): 8 bits
This field is used to track the lifetime of the datagram. The inner header TTL is decremented before encapsulation and is not changed in decapsulator. The outer header TTL is set to value such that the datagram is delivered to tunnel end point.
Protocol: 8 bits
This field indicates the transport layer protocol of the datagram following this header. The value is set to 4 for IP in IP. Not to be mistaken with value 4 in the Version field, which indicates IPv4.
Header Checksum: 16 bits
This field is the IP checksum of outer header.
Source IP Address: 32 bits
This field is the IP address of the encapsulator.
Destination IP Address: 32 bits
This field is the IP address of the decapsulator.
Options: 0 - 320 bits, padded to multiples of 32 bits
This field in general is NOT copied from the inner IP header. New options can be added.

See also

References

  1. C. Perkins (October 1996). IP Encapsulation within IP. Network Working Group. doi:10.17487/RFC2003. RFC 2003. Proposed Standard. Updated by RFC 3168 and 6864.
Categories: