Misplaced Pages

The Yangyang Pumped Storage Power Station uses the water of the Namdae-Chun River to operate a 1,000-megawatt (1,300,000 hp) pumped storage hydroelectric power scheme, about 10 kilometres (6.2 mi) west of Yangyang in Gangwon Province, South Korea. The lower reservoir is created by the Yangyang Dam on the Namdae and the upper reservoir by the Inje Dam is located 937 metres (3,074 ft) above the power plant. Construction on the power plant began in 1996 and it was completed and dedicated on September 13, 2006. It is operated by Korean Midland Power Co., a subsidiary of Korea Electric Power Company and was completed at a cost of ₩1.1 trillion won (US$1.4 billion). The first generator was operational on February 23, 2006 and the last August 10, 2006.

Design and operation

The operation of the power plant begins on the Namdae-Chun River where it is dammed by the Yangsang (Sangbu) Dam at 38°01′15″N 128°33′15″E / 38.02083°N 128.55417°E / 38.02083; 128.55417 (Yangyang Dam), creating the lower reservoir. This dam is 61.5 metres (202 ft) tall and 275 metres (902 ft) long concrete gravity dam. Water from a 124.9 km (48 sq mi) catchment area collects into the lower reservoir which has a 19,982,000 m (16,200 acre⋅ft) capacity, of which 4,200,000 m (3,405 acre⋅ft) is active (or "useful") capacity for the power station. The lower reservoir has a surface area of 1.1 km (272 acres) and operates at storage levels between 127 and 131 metres (417 and 430 ft) above sea level.

During low electricity demand periods, such as the night time, water from the lower reservoir is pumped 937 metres (3,074 ft) above the valley to the upper reservoir in the mountains. The upper reservoir is created by the Inje Dam, located 5.3 km (2 sq mi) west of the Yangyang Dam at 38°01′08″N 128°29′47″E / 38.01889°N 128.49639°E / 38.01889; 128.49639 (Yangyang Dam). The Inje is a 84 m (276 ft) tall and 415 metres (1,362 ft) long rock-fill embankment dam. The capacity of the upper reservoir is 4,200,000 m (3,405 acre⋅ft) and it has a surface area of 190 square metres (0.047 acres; 0.019 ha). When electricity demand rises and the power plant begins to operate, water is released from the upper reservoir back towards the underground power plant, at the western edge of the lower reservoir. Water fluctuations in the upper reservoir range from 900 metres (3,000 ft) and 936 metres (3,071 ft) above sea level. The power plant contains four 250 MW reversible Francis turbine-generators for an installed capacity of 1,000 MW. The drop in elevation affords a maximum hydraulic head (drop) of 817 metres (2,680 ft) and effective head of 776 metres (2,546 ft).

Additionally, there are 2 x 1.5 megawatts (2,000 hp) Wind turbines installed at the upper reservoir and a 1.5 MW small hydro turbine on the Yangsang Dam.

See also

• List of power stations in South Korea

References

Download coordinates as:

• KML
• GPX (all coordinates)
• GPX (primary coordinates)
• GPX (secondary coordinates)

1. ^ "Korea dedicates 1,000-MW Yangyang pumped-storage". HydroWorld. 13 September 2006. Retrieved 5 August 2011.
2. "Pumped-Storage Plants". Korea Hydro & Nuclear Power. Retrieved 5 August 2011.
3. ^ "Environmental Impact Assessment of the Yangyang Pumped Storage Power Plant Construction on the Namdae-Chun River, Korea" (PDF). Korea Electric Power Co. 1 June 1997. Retrieved 5 August 2011.
4. "Yangyang Pumped Storage Power Plant South Korea". Global Energy Observatory. Retrieved 5 August 2011.
5. "Status of Power Generation Equipment". Korean Midland Power Co. Retrieved 5 August 2011.

• Dams completed in 2006
• Energy infrastructure completed in 2006
• Hydroelectric power stations in South Korea
• Pumped-storage hydroelectric power stations in South Korea
• Yangyang County
• Dams in South Korea
• Underground power stations