Misplaced Pages

Keniston Bridge

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
United States historic place
Keniston Bridge
U.S. National Register of Historic Places
Keniston Bridge is located in New HampshireKeniston BridgeShow map of New HampshireKeniston Bridge is located in the United StatesKeniston BridgeShow map of the United States
LocationBridge Rd. over Blackwater River, Andover, New Hampshire
Coordinates43°26′6″N 71°50′12″W / 43.43500°N 71.83667°W / 43.43500; -71.83667
Area0.1 acres (0.040 ha)
Built1882 (1882)
Built byHamilton, Albert R.
Architectural styleIthiel Town through truss
NRHP reference No.89000190
Added to NRHPMarch 16, 1989

The Keniston Bridge is a historic covered bridge in Andover, New Hampshire, carrying Bridge Street over the Blackwater River. Built in 1882, it is of Town through truss construction, and is one of the few surviving 19th-century covered bridges in the state. It is also one of the only ones whose sides are not fully sheathed, exposing the trusses. The bridge was listed on the National Register of Historic Places in 1989.

Description and history

The Keniston Bridge is located in a rural setting west of Andover's main village, carrying Bridge Street over the Blackwater River a short way south of U.S. Route 4. It is a single-span Town truss, mounted on granite bridge abutments that have been partially rebuilt in concrete. Much of the fabric of the bridge is original, although strengthening elements (wooden chords and steel beams) have been added to the trusses and the road bed, and portions of the downstream truss have been replaced. The bridge is topped by a wooden shingle roof, and measures 73 feet (22 m) in length and 19 feet (5.8 m) in width. The distance between the abutments on which it rests is 51 feet (16 m).

The bridge was built by a local builder, Albert Hamilton, and underwent repairs and renovations in 1949 and 1981. Most of the strengthening elements enabling it to carry heavier loads have been effectively hidden behind its sheathing or beneath its main structure. Unlike many of the state's surviving covered bridges, its sides are not completely sheathed, with vertical siding only rising about 5 feet (1.5 m). The bridge has survived in part because it is on a minor road that sees very little traffic.

See also

References

  1. ^ "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. ^ "NRHP nomination for Keniston Bridge". National Park Service. Retrieved 2014-03-05.
National Register of Historic Places in Merrimack County, New Hampshire
Landmarks Merrimack County map
Districts
Buildings
Houses
Places of
worship
Sites
Structures
See also: National Register of Historic Places listings in Merrimack County, New Hampshire and List of National Historic Landmarks in New Hampshire
Categories: