Misplaced Pages

LFG Roland D.III

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
1910s German fighter aircraft
Roland D.III
Role FighterType of aircraft
National origin Germany
Manufacturer LFG
Designer Dipl Ing Tantzen
First flight 1916
Primary user Luftstreitkräfte
Number built 3
Developed from LFG Roland D.I

The LFG Roland D.III was a fighter aircraft produced in Germany during World War I.

Design and development

The D.III was a further development of the D.I fighter. These machines had a fuselage that completely filled the interplane gap, a design feature intended to improve aerodynamics. However, it also resulted in limiting the pilot's field of vision in the down and forward direction, leading to complaints. LFG attempted to remedy this in the D.III design by introducing a gap between the upper fuselage and the upper wing, braced by cabane struts. The size of the tailplane was also increased.

While this did indeed result in an improvement over the Roland D.II that had preceded it, the performance of the D.III was inferior to that of other contemporary fighters available to the German Army, in particular those produced by Albatros, and the aircraft was therefore only produced in small quantities.

Forward visibility, though better in the D.III than the D.I was still not good and LFG tried to improve it with another variant, the D.V. The fuselage diameter was decreased and the decking forward of the cockpit lowered exposing all of the upper parts of the engine cylinders. Three were built, one with the Argus engine of the D.II and two with the 119 kW (160 hp) Mercedes D.III, another upright 6-cylinder engine. The visibility was not much improved and the problem was only solved with the LFG Roland D.VII, which used a V-8 engine.

Variants

D.V
Lowered fuselage to improve pilot's view. Three built, one with Argus and two with Mercedes engines.

Operators

 Bulgaria
 German Empire

Specifications (D.III)

General characteristics

  • Crew: One pilot
  • Length: 6.84 m (22 ft 5 in)
  • Wingspan: 8.94 m (29 ft 4 in)
  • Height: 2.76 m (9 ft 1 in)
  • Wing area: 19.8 m (213 sq ft)
  • Empty weight: 717 kg (1,580 lb)
  • Gross weight: 961 kg (2,119 lb)
  • Powerplant: 1 × Argus As.III 6-cylinder inline water-cooled , 134 kW (180 hp)

Performance

  • Maximum speed: 175 km/h (109 mph, 95 kn)
  • Cruise speed: 156 km/h (98 mph, 85 kn)
  • Endurance: 2 hours 30 minutes
  • Service ceiling: 4,500 m (14,800 ft)
  • Rate of climb: 4.5 m/s (880 ft/min)

Armament

  • 2 × fixed, forward-firing 7.92 mm LMG 08/15 machine guns

Notes

  1. ^ Taylor 1989, 576
  2. ^ World Aircraft Information Files File 900 Sheet 06
  3. ^ Green & Swanborough (1994) p.338

Bibliography

  • Abbott, Dan S. & Grosz, Peter M. (1977). "The Benighted Rolands". Air Enthusiast (3): 38–48. ISSN 0143-5450.
  • Green, William; Swanborough, Gordon (1994). The Complete Book of Fighters. Godalming, UK: Salamander Books. ISBN 1-85833-777-1.
  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions.
  • World Aircraft Information Files. London: Bright Star Publishing.

External links

Luft-Fahrzeug-Gesellschaft (LFG-Roland) aircraft
Pre-WW1 and WW1
Post WWI
Idflieg D and DJ-class aircraft designations
D- class
AEG
Albatros
Aviatik
Daimler
DFW
Euler
Fokker
Friedrichshafen
Halberstadt
Junkers
Kondor
LFG/Roland
LVG
Märkische
Naglo
Pfalz
Rumpler
Schütte-Lanz
Siemens-Schuckert
Zeppelin-Lindau
DJ- class
AEG
Categories: