Cross-validation (statistics)

(Redirected from Leave-one-out cross-validation) Statistical model validation technique

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Cross-validation" statistics – news · newspapers · books · scholar · JSTOR (August 2017) (Learn how and when to remove this message)

Cross-validation, sometimes called rotation estimation or out-of-sample testing, is any of various similar model validation techniques for assessing how the results of a statistical analysis will generalize to an independent data set. Cross-validation includes resampling and sample splitting methods that use different portions of the data to test and train a model on different iterations. It is often used in settings where the goal is prediction, and one wants to estimate how accurately a predictive model will perform in practice. It can also be used to assess the quality of a fitted model and the stability of its parameters.

In a prediction problem, a model is usually given a dataset of known data on which training is run (training dataset), and a dataset of unknown data (or first seen data) against which the model is tested (called the validation dataset or testing set). The goal of cross-validation is to test the model's ability to predict new data that was not used in estimating it, in order to flag problems like overfitting or selection bias and to give an insight on how the model will generalize to an independent dataset (i.e., an unknown dataset, for instance from a real problem).

One round of cross-validation involves partitioning a sample of data into complementary subsets, performing the analysis on one subset (called the training set), and validating the analysis on the other subset (called the validation set or testing set). To reduce variability, in most methods multiple rounds of cross-validation are performed using different partitions, and the validation results are combined (e.g. averaged) over the rounds to give an estimate of the model's predictive performance.

In summary, cross-validation combines (averages) measures of fitness in prediction to derive a more accurate estimate of model prediction performance.

Motivation

Assume a model with one or more unknown parameters, and a data set to which the model can be fit (the training data set). The fitting process optimizes the model parameters to make the model fit the training data as well as possible. If an independent sample of validation data is taken from the same population as the training data, it will generally turn out that the model does not fit the validation data as well as it fits the training data. The size of this difference is likely to be large especially when the size of the training data set is small, or when the number of parameters in the model is large. Cross-validation is a way to estimate the size of this effect.

Example: linear regression

In linear regression, there exist real response values ${\textstyle y_{1},\ldots ,y_{n}}$ , and n p-dimensional vector covariates x₁, ..., x_n. The components of the vector x_i are denoted x_i1, ..., x_ip. If least squares is used to fit a function in the form of a hyperplane ŷ = a + βx to the data (x_i, y_i)_{1 ≤ i ≤ n}, then the fit can be assessed using the mean squared error (MSE). The MSE for given estimated parameter values a and β on the training set (x_i, y_i)_{1 ≤ i ≤ n} is defined as:

{\begin{aligned}{\text{MSE}}&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-{\hat {y}}_{i})^{2}={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-{\boldsymbol {\beta }}^{T}\mathbf {x} _{i})^{2}\\&={\frac {1}{n}}\sum _{i=1}^{n}(y_{i}-a-\beta _{1}x_{i1}-\dots -\beta _{p}x_{ip})^{2}\end{aligned}}

If the model is correctly specified, it can be shown under mild assumptions that the expected value of the MSE for the training set is (n − p − 1)/(n + p + 1) < 1 times the expected value of the MSE for the validation set (the expected value is taken over the distribution of training sets). Thus, a fitted model and computed MSE on the training set will result in an optimistically biased assessment of how well the model will fit an independent data set. This biased estimate is called the in-sample estimate of the fit, whereas the cross-validation estimate is an out-of-sample estimate.

Since in linear regression it is possible to directly compute the factor (n − p − 1)/(n + p + 1) by which the training MSE underestimates the validation MSE under the assumption that the model specification is valid, cross-validation can be used for checking whether the model has been overfitted, in which case the MSE in the validation set will substantially exceed its anticipated value. (Cross-validation in the context of linear regression is also useful in that it can be used to select an optimally regularized cost function.)

General case

In most other regression procedures (e.g. logistic regression), there is no simple formula to compute the expected out-of-sample fit. Cross-validation is, thus, a generally applicable way to predict the performance of a model on unavailable data using numerical computation in place of theoretical analysis.

Types

Two types of cross-validation can be distinguished: exhaustive and non-exhaustive cross-validation.

Exhaustive cross-validation

Exhaustive cross-validation methods are cross-validation methods which learn and test on all possible ways to divide the original sample into a training and a validation set.

Leave-p-out cross-validation

Leave-p-out cross-validation (LpO CV) involves using p observations as the validation set and the remaining observations as the training set. This is repeated on all ways to cut the original sample on a validation set of p observations and a training set.

LpO cross-validation require training and validating the model $C_{p}^{n}$ times, where n is the number of observations in the original sample, and where $C_{p}^{n}$ is the binomial coefficient. For p > 1 and for even moderately large n, LpO CV can become computationally infeasible. For example, with n = 100 and p = 30, $C_{30}^{100}\approx 3\times 10^{25}.$

A variant of LpO cross-validation with p=2 known as leave-pair-out cross-validation has been recommended as a nearly unbiased method for estimating the area under ROC curve of binary classifiers.

Leave-one-out cross-validation

Leave-one-out cross-validation (LOOCV) is a particular case of leave-p-out cross-validation with p = 1. The process looks similar to jackknife; however, with cross-validation one computes a statistic on the left-out sample(s), while with jackknifing one computes a statistic from the kept samples only.

LOO cross-validation requires less computation time than LpO cross-validation because there are only $C_{1}^{n}=n$ passes rather than $C_{p}^{n}$ . However, $n$ passes may still require quite a large computation time, in which case other approaches such as k-fold cross validation may be more appropriate.

Pseudo-code algorithm:

Input:

x, {vector of length N with x-values of incoming points}

y, {vector of length N with y-values of the expected result}

interpolate( x_in, y_in, x_out ), { returns the estimation for point x_out after the model is trained with x_in-y_in pairs}

Output:

err, {estimate for the prediction error}

Steps:

 err ← 0
 for i ← 1, ..., N do
   // define the cross-validation subsets
   x_in ← (x, ..., x, x, ..., x)
   y_in ← (y, ..., y, y, ..., y)
   x_out ← x
   y_out ← interpolate(x_in, y_in, x_out)
   err ← err + (y − y_out)^2
 end for
 err ← err/N

Non-exhaustive cross-validation

Non-exhaustive cross validation methods do not compute all ways of splitting the original sample. These methods are approximations of leave-p-out cross-validation.

k-fold cross-validation

In k-fold cross-validation, the original sample is randomly partitioned into k equal sized subsamples, often referred to as "folds". Of the k subsamples, a single subsample is retained as the validation data for testing the model, and the remaining k − 1 subsamples are used as training data. The cross-validation process is then repeated k times, with each of the k subsamples used exactly once as the validation data. The k results can then be averaged to produce a single estimation. The advantage of this method over repeated random sub-sampling (see below) is that all observations are used for both training and validation, and each observation is used for validation exactly once. 10-fold cross-validation is commonly used, but in general k remains an unfixed parameter.

For example, setting k = 2 results in 2-fold cross-validation. In 2-fold cross-validation, we randomly shuffle the dataset into two sets d₀ and d₁, so that both sets are equal size (this is usually implemented by shuffling the data array and then splitting it in two). We then train on d₀ and validate on d₁, followed by training on d₁ and validating on d₀.

When k = n (the number of observations), k-fold cross-validation is equivalent to leave-one-out cross-validation.

In stratified k-fold cross-validation, the partitions are selected so that the mean response value is approximately equal in all the partitions. In the case of binary classification, this means that each partition contains roughly the same proportions of the two types of class labels.

In repeated cross-validation the data is randomly split into k partitions several times. The performance of the model can thereby be averaged over several runs, but this is rarely desirable in practice.

When many different statistical or machine learning models are being considered, greedy k-fold cross-validation can be used to quickly identify the most promising candidate models.

Holdout method

In the holdout method, we randomly assign data points to two sets d₀ and d₁, usually called the training set and the test set, respectively. The size of each of the sets is arbitrary although typically the test set is smaller than the training set. We then train (build a model) on d₀ and test (evaluate its performance) on d₁.

In typical cross-validation, results of multiple runs of model-testing are averaged together; in contrast, the holdout method, in isolation, involves a single run. It should be used with caution because without such averaging of multiple runs, one may achieve highly misleading results. One's indicator of predictive accuracy (F) will tend to be unstable since it will not be smoothed out by multiple iterations (see below). Similarly, indicators of the specific role played by various predictor variables (e.g., values of regression coefficients) will tend to be unstable.

While the holdout method can be framed as "the simplest kind of cross-validation", many sources instead classify holdout as a type of simple validation, rather than a simple or degenerate form of cross-validation.

Repeated random sub-sampling validation

This method, also known as Monte Carlo cross-validation, creates multiple random splits of the dataset into training and validation data. For each such split, the model is fit to the training data, and predictive accuracy is assessed using the validation data. The results are then averaged over the splits. The advantage of this method (over k-fold cross validation) is that the proportion of the training/validation split is not dependent on the number of iterations (i.e., the number of partitions). The disadvantage of this method is that some observations may never be selected in the validation subsample, whereas others may be selected more than once. In other words, validation subsets may overlap. This method also exhibits Monte Carlo variation, meaning that the results will vary if the analysis is repeated with different random splits.

As the number of random splits approaches infinity, the result of repeated random sub-sampling validation tends towards that of leave-p-out cross-validation.

In a stratified variant of this approach, the random samples are generated in such a way that the mean response value (i.e. the dependent variable in the regression) is equal in the training and testing sets. This is particularly useful if the responses are dichotomous with an unbalanced representation of the two response values in the data.

A method that applies repeated random sub-sampling is RANSAC.

Nested cross-validation

When cross-validation is used simultaneously for selection of the best set of hyperparameters and for error estimation (and assessment of generalization capacity), a nested cross-validation is required. Many variants exist. At least two variants can be distinguished:

k*l-fold cross-validation

This is a truly nested variant which contains an outer loop of k sets and an inner loop of l sets. The total data set is split into k sets. One by one, a set is selected as the (outer) test set and the k - 1 other sets are combined into the corresponding outer training set. This is repeated for each of the k sets. Each outer training set is further sub-divided into l sets. One by one, a set is selected as inner test (validation) set and the l - 1 other sets are combined into the corresponding inner training set. This is repeated for each of the l sets. The inner training sets are used to fit model parameters, while the outer test set is used as a validation set to provide an unbiased evaluation of the model fit. Typically, this is repeated for many different hyperparameters (or even different model types) and the validation set is used to determine the best hyperparameter set (and model type) for this inner training set. After this, a new model is fit on the entire outer training set, using the best set of hyperparameters from the inner cross-validation. The performance of this model is then evaluated using the outer test set.

k-fold cross-validation with validation and test set

This is a type of k*l-fold cross-validation when l = k - 1. A single k-fold cross-validation is used with both a validation and test set. The total data set is split into k sets. One by one, a set is selected as test set. Then, one by one, one of the remaining sets is used as a validation set and the other k - 2 sets are used as training sets until all possible combinations have been evaluated. Similar to the k*l-fold cross validation, the training set is used for model fitting and the validation set is used for model evaluation for each of the hyperparameter sets. Finally, for the selected parameter set, the test set is used to evaluate the model with the best parameter set. Here, two variants are possible: either evaluating the model that was trained on the training set or evaluating a new model that was fit on the combination of the training and the validation set.

Measures of fit

The goal of cross-validation is to estimate the expected level of fit of a model to a data set that is independent of the data that were used to train the model. It can be used to estimate any quantitative measure of fit that is appropriate for the data and model. For example, for binary classification problems, each case in the validation set is either predicted correctly or incorrectly. In this situation the misclassification error rate can be used to summarize the fit, although other measures derived from information (e.g., counts, frequency) contained within a contingency table or confusion matrix could also be used. When the value being predicted is continuously distributed, the mean squared error, root mean squared error or median absolute deviation could be used to summarize the errors.

Using prior information

When users apply cross-validation to select a good configuration $\lambda$ , then they might want to balance the cross-validated choice with their own estimate of the configuration. In this way, they can attempt to counter the volatility of cross-validation when the sample size is small and include relevant information from previous research. In a forecasting combination exercise, for instance, cross-validation can be applied to estimate the weights that are assigned to each forecast. Since a simple equal-weighted forecast is difficult to beat, a penalty can be added for deviating from equal weights. Or, if cross-validation is applied to assign individual weights to observations, then one can penalize deviations from equal weights to avoid wasting potentially relevant information. Hoornweg (2018) shows how a tuning parameter $\gamma$ can be defined so that a user can intuitively balance between the accuracy of cross-validation and the simplicity of sticking to a reference parameter $\lambda _{R}$ that is defined by the user.

If $\lambda _{i}$ denotes the $i^{th}$ candidate configuration that might be selected, then the loss function that is to be minimized can be defined as

L_{\lambda _{i}}=(1-\gamma ){\mbox{ Relative Accuracy}}_{i}+\gamma {\mbox{ Relative Simplicity}}_{i}.

Relative accuracy can be quantified as ${\mbox{MSE}}(\lambda _{i})/{\mbox{MSE}}(\lambda _{R})$ , so that the mean squared error of a candidate $\lambda _{i}$ is made relative to that of a user-specified $\lambda _{R}$ . The relative simplicity term measures the amount that $\lambda _{i}$ deviates from $\lambda _{R}$ relative to the maximum amount of deviation from $\lambda _{R}$ . Accordingly, relative simplicity can be specified as ${\frac {(\lambda _{i}-\lambda _{R})^{2}}{(\lambda _{\max }-\lambda _{R})^{2}}}$ , where $\lambda _{\max }$ corresponds to the $\lambda$ value with the highest permissible deviation from $\lambda _{R}$ . With $\gamma \in$ , the user determines how high the influence of the reference parameter is relative to cross-validation.

One can add relative simplicity terms for multiple configurations $c=1,2,...,C$ by specifying the loss function as

L_{\lambda _{i}}={\mbox{ Relative Accuracy}}_{i}+\sum _{c=1}^{C}{\frac {\gamma _{c}}{1-\gamma _{c}}}{\mbox{ Relative Simplicity}}_{i,c}.

Hoornweg (2018) shows that a loss function with such an accuracy-simplicity tradeoff can also be used to intuitively define shrinkage estimators like the (adaptive) lasso and Bayesian / ridge regression. Click on the lasso for an example.

Statistical properties

Computational issues

Most forms of cross-validation are straightforward to implement as long as an implementation of the prediction method being studied is available. In particular, the prediction method can be a "black box" – there is no need to have access to the internals of its implementation. If the prediction method is expensive to train, cross-validation can be very slow since the training must be carried out repeatedly. In some cases such as least squares and kernel regression, cross-validation can be sped up significantly by pre-computing certain values that are needed repeatedly in the training, or by using fast "updating rules" such as the Sherman–Morrison formula. However one must be careful to preserve the "total blinding" of the validation set from the training procedure, otherwise bias may result. An extreme example of accelerating cross-validation occurs in linear regression, where the results of cross-validation have a closed-form expression known as the prediction residual error sum of squares (PRESS).

Limitations and misuse

Cross-validation only yields meaningful results if the validation set and training set are drawn from the same population and only if human biases are controlled.

In many applications of predictive modeling, the structure of the system being studied evolves over time (i.e. it is "non-stationary"). Both of these can introduce systematic differences between the training and validation sets. For example, if a model for prediction of trend changes in financial quotations is trained on data for a certain five-year period, it is unrealistic to treat the subsequent five-year period as a draw from the same population. As another example, suppose a model is developed to predict an individual's risk for being diagnosed with a particular disease within the next year. If the model is trained using data from a study involving only a specific population group (e.g. young people or males), but is then applied to the general population, the cross-validation results from the training set could differ greatly from the actual predictive performance.

In many applications, models also may be incorrectly specified and vary as a function of modeler biases and/or arbitrary choices. When this occurs, there may be an illusion that the system changes in external samples, whereas the reason is that the model has missed a critical predictor and/or included a confounded predictor. New evidence is that cross-validation by itself is not very predictive of external validity, whereas a form of experimental validation known as swap sampling that does control for human bias can be much more predictive of external validity. As defined by this large MAQC-II study across 30,000 models, swap sampling incorporates cross-validation in the sense that predictions are tested across independent training and validation samples. Yet, models are also developed across these independent samples and by modelers who are blinded to one another. When there is a mismatch in these models developed across these swapped training and validation samples as happens quite frequently, MAQC-II shows that this will be much more predictive of poor external predictive validity than traditional cross-validation.

The reason for the success of the swapped sampling is a built-in control for human biases in model building. In addition to placing too much faith in predictions that may vary across modelers and lead to poor external validity due to these confounding modeler effects, these are some other ways that cross-validation can be misused:

By performing an initial analysis to identify the most informative features using the entire data set – if feature selection or model tuning is required by the modeling procedure, this must be repeated on every training set. Otherwise, predictions will certainly be upwardly biased. If cross-validation is used to decide which features to use, an inner cross-validation to carry out the feature selection on every training set must be performed.
Performing mean-centering, rescaling, dimensionality reduction, outlier removal or any other data-dependent preprocessing using the entire data set. While very common in practice, this has been shown to introduce biases into the cross-validation estimates.
By allowing some of the training data to also be included in the test set – this can happen due to "twinning" in the data set, whereby some exactly identical or nearly identical samples are present in the data set, see pseudoreplication. To some extent twinning always takes place even in perfectly independent training and validation samples. This is because some of the training sample observations will have nearly identical values of predictors as validation sample observations. And some of these will correlate with a target at better than chance levels in the same direction in both training and validation when they are actually driven by confounded predictors with poor external validity. If such a cross-validated model is selected from a k-fold set, human confirmation bias will be at work and determine that such a model has been validated. This is why traditional cross-validation needs to be supplemented with controls for human bias and confounded model specification like swap sampling and prospective studies.

Cross validation for time-series models

Applications

Cross-validation can be used to compare the performances of different predictive modeling procedures. For example, suppose we are interested in optical character recognition, and we are considering using either a Support Vector Machine (SVM) or k-nearest neighbors (KNN) to predict the true character from an image of a handwritten character. Using cross-validation, we can obtain empirical estimates comparing these two methods in terms of their respective fractions of misclassified characters. In contrast, the in-sample estimate will not represent the quantity of interest (i.e. the generalization error).

Cross-validation can also be used in variable selection. Suppose we are using the expression levels of 20 proteins to predict whether a cancer patient will respond to a drug. A practical goal would be to determine which subset of the 20 features should be used to produce the best predictive model. For most modeling procedures, if we compare feature subsets using the in-sample error rates, the best performance will occur when all 20 features are used. However under cross-validation, the model with the best fit will generally include only a subset of the features that are deemed truly informative.

A recent development in medical statistics is its use in meta-analysis. It forms the basis of the validation statistic, Vn which is used to test the statistical validity of meta-analysis summary estimates. It has also been used in a more conventional sense in meta-analysis to estimate the likely prediction error of meta-analysis results.

Notes and references

Piryonesi, S. Madeh; El-Diraby, Tamer E. (March 2020). "Data Analytics in Asset Management: Cost-Effective Prediction of the Pavement Condition Index". Journal of Infrastructure Systems. 26 (1). doi:10.1061/(ASCE)IS.1943-555X.0000512.
Allen, David M (1974). "The Relationship between Variable Selection and Data Agumentation and a Method for Prediction". Technometrics. 16 (1): 125–127. doi:10.2307/1267500. JSTOR 1267500.
Stone, M. (1974). "Cross-Validatory Choice and Assessment of Statistical Predictions". Journal of the Royal Statistical Society Series B: Statistical Methodology. 36 (2): 111–133. doi:10.1111/j.2517-6161.1974.tb00994.x.
Stone, M (1977). "An Asymptotic Equivalence of Choice of Model by Cross-Validation and Akaike's Criterion". Journal of the Royal Statistical Society, Series B (Methodological). 39 (1): 44–47. doi:10.1111/j.2517-6161.1977.tb01603.x. JSTOR 2984877.
Geisser, Seymour (1993). Predictive Inference. New York, NY: Chapman and Hall. ISBN 978-0-412-03471-8.
^ Kohavi, Ron (20 August 1995). "A study of cross-validation and bootstrap for accuracy estimation and model selection" (PDF). Proceedings of the 14th international joint conference on Artificial intelligence. Vol. 2. Morgan Kaufmann Publishers. pp. 1137–1143. ISBN 978-1-55860-363-9.
Devijver, Pierre A.; Kittler, Josef (1982). Pattern Recognition: A Statistical Approach. London, GB: Prentice-Hall. ISBN 978-0-13-654236-0.
Galkin, Alexander (November 28, 2011). "What is the difference between test set and validation set?". Cross Validated. Stack Exchange. Retrieved 10 October 2018.
"Newbie question: Confused about train, validation and test data!". Heaton Research. December 2010. Archived from the original on 2015-03-14. Retrieved 2013-11-14.
Cawley, Gavin C.; Talbot, Nicola L. C. (2010). "On Over-fitting in Model Selection and Subsequent Selection Bias in Performance Evaluation" (PDF). Journal of Machine Learning Research. 11: 2079–2107.
Seni, Giovanni; Elder, John F. (January 2010). "Ensemble Methods in Data Mining: Improving Accuracy Through Combining Predictions". Synthesis Lectures on Data Mining and Knowledge Discovery. 2 (1): 1–126. doi:10.2200/S00240ED1V01Y200912DMK002.
Celisse, Alain (October 2014). "Optimal cross-validation in density estimation with the L-loss". The Annals of Statistics. 42 (5). arXiv:0811.0802. doi:10.1214/14-AOS1240.
Airola, Antti; Pahikkala, Tapio; Waegeman, Willem; De Baets, Bernard; Salakoski, Tapio (April 2011). "An experimental comparison of cross-validation techniques for estimating the area under the ROC curve". Computational Statistics & Data Analysis. 55 (4): 1828–1844. doi:10.1016/j.csda.2010.11.018.
Molinaro, Annette M.; Simon, Richard; Pfeiffer, Ruth M. (August 2005). "Prediction error estimation: a comparison of resampling methods". Bioinformatics. 21 (15): 3301–3307. doi:10.1093/bioinformatics/bti499. PMID 15905277.
Analyzing Microarray Gene Expression Data. Wiley Series in Probability and Statistics. Wiley. 2004. doi:10.1002/047172842X. ISBN 978-0-471-22616-1.
The Elements of Statistical Learning. Springer Series in Statistics. 2009. doi:10.1007/978-0-387-84858-7. ISBN 978-0-387-84857-0.
Vanwinckelen, Gitte; Blockeel, Hendrik (2012). "On Estimating Model Accuracy with Repeated Cross-Validation". BeneLearn 2012: Proceedings of the 21st Belgian-Dutch Conference on Machine Learning. pp. 39–44. ISBN 978-94-6197-044-2.
Soper, Daniel S. (16 August 2021). "Greed Is Good: Rapid Hyperparameter Optimization and Model Selection Using Greedy k-Fold Cross Validation". Electronics. 10 (16): 1973. doi:10.3390/electronics10161973.
"Cross Validation". Retrieved 11 November 2012.
Arlot, Sylvain; Celisse, Alain (2010). "A survey of cross-validation procedures for model selection". Statistics Surveys. 4: 40–79. arXiv:0907.4728. doi:10.1214/09-SS054. In brief, CV consists in averaging several hold-out estimators of the risk corresponding to different data splits.
Xu, Qing-Song; Liang, Yi-Zeng (April 2001). "Monte Carlo cross validation". Chemometrics and Intelligent Laboratory Systems. 56 (1): 1–11. doi:10.1016/S0169-7439(00)00122-2.
Simon, Richard (2007). "Resampling Strategies for Model Assessment and Selection". Fundamentals of Data Mining in Genomics and Proteomics. pp. 173–186. doi:10.1007/978-0-387-47509-7_8. ISBN 978-0-387-47508-0.
Kuhn, Max; Johnson, Kjell (2013). Applied Predictive Modeling. doi:10.1007/978-1-4614-6849-3. ISBN 978-1-4614-6848-6.
Cantzler, H. Random Sample Consensus (RANSAC) (PDF) (Report).
^ Hoornweg, Victor (2018). Science: Under Submission (PDF). Hoornweg Press. ISBN 978-90-829188-0-9.
^ Efron, Bradley; Tibshirani, Robert (1997). "Improvements on cross-validation: The .632 + Bootstrap Method". Journal of the American Statistical Association. 92 (438): 548–560. doi:10.2307/2965703. JSTOR 2965703. MR 1467848.
Stone, Mervyn (1977). "Asymptotics for and against cross-validation". Biometrika. 64 (1): 29–35. doi:10.1093/biomet/64.1.29. JSTOR 2335766. MR 0474601.
Shi, L.; et al. (2010). "The MicroArray Quality Control (MAQC)-II study of common practices for the development and validation of microarray-based predictive models". Nature Biotechnology. 28 (8): 827–838. doi:10.1038/nbt.1665. PMC 3315840. PMID 20676074.
Bermingham, M. L.; Pong-Wong, R.; Spiliopoulou, A.; Hayward, C.; Rudan, I.; Campbell, H.; Wright, A. F.; Wilson, J. F.; Agakov, F.; Navarro, P.; Haley, C. S. (19 May 2015). "Application of high-dimensional feature selection: evaluation for genomic prediction in man". Scientific Reports. 5 (1): 10312. Bibcode:2015NatSR...510312B. doi:10.1038/srep10312. PMC 4437376. PMID 25988841.
Varma, Sudhir; Simon, Richard (December 2006). "Bias in error estimation when using cross-validation for model selection". BMC Bioinformatics. 7 (1): 91. doi:10.1186/1471-2105-7-91. PMC 1397873. PMID 16504092.
Moscovich, Amit; Rosset, Saharon (September 2022). "On the Cross-Validation Bias due to Unsupervised Preprocessing". Journal of the Royal Statistical Society Series B: Statistical Methodology. 84 (4): 1474–1502. arXiv:1901.08974. doi:10.1111/rssb.12537.
Cross-validation strategies for data with temporal, spatial, hierarchical, or phylogenetic structure https://nsojournals.onlinelibrary.wiley.com/doi/10.1111/ecog.02881
Bergmeir, Christoph; Benítez, José M. (May 2012). "On the use of cross-validation for time series predictor evaluation". Information Sciences. 191: 192–213. doi:10.1016/j.ins.2011.12.028.
Politis, Dimitris N.; Romano, Joseph P. (December 1994). "The Stationary Bootstrap". Journal of the American Statistical Association. 89 (428): 1303–1313. doi:10.1080/01621459.1994.10476870. hdl:10983/25607.
The Elements of Statistical Learning. Springer Series in Statistics. 2009. doi:10.1007/978-0-387-84858-7. ISBN 978-0-387-84857-0.
Picard, Richard; Cook, Dennis (1984). "Cross-Validation of Regression Models". Journal of the American Statistical Association. 79 (387): 575–583. doi:10.2307/2288403. JSTOR 2288403.
Willis, Brian H.; Riley, Richard D. (20 September 2017). "Measuring the statistical validity of summary meta-analysis and meta-regression results for use in clinical practice". Statistics in Medicine. 36 (21): 3283–3301. doi:10.1002/sim.7372. PMC 5575530. PMID 28620945.
Riley, Richard D.; Ahmed, Ikhlaaq; Debray, Thomas P. A.; Willis, Brian H.; Noordzij, J. Pieter; Higgins, Julian P.T.; Deeks, Jonathan J. (15 June 2015). "Summarising and validating test accuracy results across multiple studies for use in clinical practice". Statistics in Medicine. 34 (13): 2081–2103. doi:10.1002/sim.6471. PMC 4973708. PMID 25800943.

Misplaced Pages