Misplaced Pages

The Leicaflex series of high-end single-lens reflex 35 mm format film cameras were introduced by Leitz Camera in 1964. The first camera body was paired with the new R bayonet series of lenses. Three model of the cameras were sold by Leitz; the Leicaflex Standard, the Leicaflex SL and the Leicaflex SL2.

Late into the market with high prices and limited range of lenses and accessories, Leicaflex sales were below expectations and production ended in 1976. However, the production of the R mount lenses continued and were paired with the new Leica R3 that was developed in cooperation with Minolta, together with the Minolta XE bodies.

Leicaflex

Leicaflex

Overview
Maker	Leitz
Type	35 mm SLR camera
Released	1964
Production	1964-1968
Lens
Lens mount	R bayonet
Sensor/medium
Film advance	Manual
Focusing
Focus	Manual
General
Dimensions	148 × 97 × 50 mm
Weight	770 g
Made in	Germany
Chronology
Successor	Leicaflex SL

In 1964 Leitz introduced its first single-lens reflex camera, the Leicaflex also known as the Leicaflex Standard. This was a response, albeit reluctantly, to the rising popularity of the SLR format. Ludwig Leitz, head of the company was urged to begin development by photographer Walther Benser back in 1955. This was due to Benser's opinion that the SLR camera system would soon rise in popularity.

Beginning with the introduction of the Asahi Pentax in 1957, the Nikon F and the Canonflex in 1959, all from Japan. However, Leitz did not have the expertise the Japanese had in this format. To date its leading product; the Leica M mount series was a rangefinder camera, a format long abandoned by its competitors in the Far East. Finally, development of the Leicaflex began in 1958 and the first prototype was shown in 1963. A year later the camera was released.

The Leicaflex featured a shutter speed range of 1 second to 1/2000 a second, a CdS exposure light meter (but not through-the-lens metering) and a new range of lenses with quick change bayonet (the R bayonet). The design was minimal, and the camera body was based on the Leica M. The viewfinder featured display indicators for the shutter speed setting and the light meter reading. Correct exposure is obtained by matching the needles displayed in the viewfinder. The shutter speed dial, film crank, film rewind and film count are all located on the top plate.

Due to its complicated mechanical construction the camera was extremely costly to manufacture. Its high price and lack of through-the-lens metering led to disappointing sales and only 37,500 units were made (mostly in silver chrome and about 1,000 units in black paint). Production of this camera ended in 1968.

Leicaflex SL

Leicaflex SL

Overview
Maker	Leitz
Type	35 mm SLR camera
Released	1968
Production	1968-1974
Lens
Lens mount	R bayonet
Sensor/medium
Film advance	Manual
Focusing
Focus	Manual
General
Dimensions	148 × 97 × 50 mm
Weight	770 g
Made in	Germany
Chronology
Predecessor	Leicaflex Standard
Successor	Leicaflex SL2

In 1968 the Leicaflex SL was introduced, with the SL standing for selective light. The Leicaflex SL featured TTL metering with a 5% selective measurement of the subject field, corresponding with the diameter of the circle of the micro prism. This meant that the Leicaflex SL was the first SLR camera with selective TTL metering. This was considered theoretically superior to other systems that relied on the average reading of the whole prism.

This model also featured a depth-of-field preview button. There were a few cosmetic revisions including the change of the colour of the shutter dial from silver to black and the relocation of the batteries to the camera's base plate. Models were produced in silver chrome and black paint. In 1972 a special edition was produced to commemorate the 1972 Summer Olympics, held in Munich, West Germany. The Olympic rings and the number 72 were engraved on the top plate, only 1,200 of these were produced with special serial numbers.

From 1972 to 1974 a small number of Leicaflex SL MOT were produced in black, and a few in silver chrome, with 'MOT' engraved on the top plate. These models have an internal drive shaft, which allowed an external motor to be attached for fast film winding. Furthermore, all contacts and controls were mounted externally on its base plate, thus allowing for quick mounting of the motor without the need to remove the base plate. The SL MOT, however lacked the self-timer and the meter switch in the advance lever of the ordinary models.

The Leicaflex SL (including the SL MOT) sold over 70,000 units. Production of this camera ended in 1974.

Leicaflex SL2

Leicaflex SL2

Overview
Maker	Leitz
Type	35 mm SLR camera
Released	1974
Production	1974-1976
Lens
Lens mount	R bayonet
Sensor/medium
Film advance	Manual
Focusing
Focus	Manual
General
Dimensions	148 × 97 × 50 mm
Weight	770 g
Made in	Germany
Chronology
Predecessor	Leicaflex SL
Successor	Leica R3

The Leicaflex SL2 was introduced in 1974. The new model contained several new features, but also some cost-cutting measures. Improvements included an increase in meter sensitivity (3 stops more than the previous model). The aperture indicator was added to the viewfinder, which could be illuminated by pressing a separate button (with added extra battery compartment). A redesigned mirror in the body allowed the camera to accept new wide-angle lenses (such as the 16 mm and 19 mm focal length).

Cosmetically the camera shape was squarer and was less curved than its predecessor. Models were produced in silver chrome and in black chrome. A switch from black paint to black chrome plating was chosen as the former process was more expensive due to the fact that the layer of paint was thicker than the chrome plating as a result different dimensions had to be made for the different parts in order for the final result to be of the same size. More non-metal components were also added to reduce the cost of manufacturing.

In 1975 a special edition model was produced for the 50th anniversary of the production of the first Leica. These models were engraved with '50 JAHRE' surrounded by oak leaves, only 1,750 were made.

A Leicaflex SL2 MOT was also introduced, all in black paint. Two models of the motors were produced to go with the camera. The earlier motor was for a continuous run for film rewinding, while the later model had a control marked 'E' (Einzel or 'single') for using the motor as a power winder for single shots.

Production of this camera ended in 1976, which meant that the camera was on the catalogue for only two years. During this period over 26,000 units were sold (25,000 SL2 and 10,000 SL2 MOT). By 1976 due to limited success, high cost of production and other financial constraints, Leitz discontinued the Leicaflex series. In fact, Leitz was losing money on each Leicaflex SL2 sold, due to the high-cost manufacture. The sales of the R bayonet lenses were not able to compensate for this loss and the entire product line became unsustainable for the company.

Furthermore in 1973 the Leitz family transferred the ownership and management of the company over to Wild Heerbrugg, which had little interest in the photographic division of the company. However, a fortunate partnership back in 1971 with Minolta was able to save the R bayonet lens system. In 1976 the Leica R3 was introduced (designed and produced in conjunction with Minolta). The Leica R3 started a new series of camera, which on the whole were a lot cheaper and more electronically innovative than the Leicaflex series, whilst maintaining the R bayonet lenses. Leica did not return to the SLR market until 1997, with the introduction of the digital Leica S-System.

References

Citations

1. photoscala.de, July 2018, »R« – in the Shadow of the »M«, retrieved at 1 November 2020 (German).
2. Eastland 2006, p. 8
3. ^ Puts 2014, p. 87
4. Laney 2004, p. 72
5. Eastland 2006, p. 21
6. ^ Laney 2004, p. 73
7. ^ Puts 2014, p. 87
8. ^ Laney 2004, p. 74
9. "Leicaflex SL2 review". www.apotelyt.com. Retrieved 2021-04-20.
10. "The Leicaflex SL2 Could be the Best Leica SLR Ever Made". Casual Photophile. 2017-08-31. Retrieved 2021-04-20.
11. Puts 2014, p. 90

Bibliography

• Eastland, Jonathan (2006-11-15). Leica R Compendium: Handbook of the Leica R System. Steyning Photo Books LLP. ISBN 978-1-897802-07-6.
• Laney, Dennis (2004-10-23). Leica Pocket Book. Steyning Photo Books. ISBN 978-1-874707-34-9.
• Puts, Erwin (2014). Leica Chronicle - Evolution of Leica cameras & lenses and the origin of the Leica legend. Netherlands: imX/Photosite. ISBN 978-94-91089-10-7.

External links

• Media related to Leicaflex at Wikimedia Commons
• Media related to Leicaflex SL at Wikimedia Commons
• Media related to Leicaflex SL2 at Wikimedia Commons

v t e Leica Camera
Leica Geosystems Leica Microsystems
Rangefinder	Thread-mount Leica Standard Leica II Leica III Leica 250 Reporter M mount (film) M3 M2 M1 M4 M5 CL M6 / M6 TTL M7 MP M-A M mount (digital) M8 M9 / M9-P M (Typ 240) / M-P (Typ 240) M-E (Typ 220) M (Typ 262) M-E (Typ 240) M Monochrom M Monochrom (Typ 246) M-D M10 / M10-P / M10-R M10-D M10 Monochrom M11 Four Thirds mount Digilux 3
Single-lens reflex	R mount Leicaflex / SL / SL2 Leica R3 Leica R4 / R5 / R6 / R7 Leica R8 / R9 S mount Leica S1 Leica S2 Leica S (Typ 006) Leica S (Typ 007) Leica S3
Mirrorless	L mount Leica T (Typ 701) Leica TL Leica TL2 Leica CL (Typ 7323) Leica SL (Typ 601) Leica SL2 Leica SL2-S
Digital compact	Leica X1 Leica X2 Leica X Vario Leica X (Typ 113) Leica X-U Leica Q / Leica Q-P Leica Q2 Leica Q3 Digilux 1 Digilux 2
Camera lens	Noctilux Summilux Summicron Summarit Elmarit Elmar / Super Elmar Summaron Hektor
People	Oskar Barnack Walther Benser Wild Heerbrugg Ernst Leitz II Walter Mandler Heinrich Wild
Other	List of Leica cameras Ernst Leitz GmbH Leica Freedom Train Leica Historical Society of America Lumix
Category Commons

• Leica R-mount cameras
• 135 film cameras
• Cameras introduced in 1964
• Products introduced in 1964