Article snapshot taken from Wikipedia with creative commons attribution-sharealike license.
Give it a read and then ask your questions in the chat.
We can research this topic together.
(Redirected from Mark 48 machine gun)
This article is about the machine gun. For the torpedo, see Mark 48 torpedo. For the missile launcher, see RIM-162 ESSM.
General-purpose machine gun
Non-disintegrating DM1 or disintegrating M13 linked belt
The Mark 48, or Mk 48, is a belt-fed general-purpose machine gun chambered for 7.62×51mm NATO cartridges, fed from a disintegrating belt (M13 link) or the non-disintegrating segmented German DM1 belt of ammunition.
It is manufactured by Fabrique Nationale Manufacturing Inc., a division of FN Herstal based in the United States. The Mk 48 has been developed in conjunction with the U.S. Special Operations Command (USSOCOM), which has adopted the weapon and started its fielding process, beginning with special operations units.
Being heavily based on the Mk 46 Mod 0, the Mk 48 Mod 0 features five MIL-STD-1913 Picatinny rails (one on top of the receiver, one on each side of the forearm/handguard, one under the handguard, and one on top of the barrel), an integral folding bipod, and a tripod-mounting lug. The weapon is fitted with the same fixed, polymer buttstock as the M249, although the metallic, collapsible buttstock from the "Para" model can be found in some models. The carrying handle, which had been removed from the Mk 46, was reintegrated on the Mk 48 to assist the replacement of hot barrels without use of other equipment, such as heat-resistant gloves; the handle can be folded down when not in use. As with the Mk 46, the Mk 48 Mod 0 does not have an M249-type magazine feed port, in order to save weight. The weapon can be fed from a loose belt, separate belt boxes, or clip-on ammunition pouches for 100 rounds. It has a cyclic rate of fire of around 650–730 rounds per minute.
There is a high degree of parts commonality between the Mk48, M249 and Mk46 machine guns, which simplifies maintenance and repair. The use of M1913 "Picatinny" rails allows the fitting of various accessories from the SOPMOD kit, such as the ECOS-N (Enhanced Combat Optical Sight) red dot sight and other sighting or target-designating devices. The Mk 48 can also be fitted with a vertical foregrip for increased controllability during sustained fire. While heavier than the 5.56×45mm NATO M249 due to its larger chambering and heavier barrel, the Mk 48 Mod 0 is still 17% lighter and 8.4% shorter than the M240.
The disadvantages of Mk 48 Mod 0 are that the life of the receiver is only about half of the M240B, and the effective range with accuracy are slightly lower than the M240B.
Mk 48 Mod 0 in US Army service in Afghanistan, 2010This is a 7.62×51mm NATO version of the Mk 46, used by USSOCOM when a heavier cartridge is required. It is officially classified as an LWMG (light weight machine gun) and was developed as a replacement for the Mk 43 Mod 0/1. The M60-based machine guns are a great deal more portable than the heavier M240-based designs used elsewhere in the U.S. military in the infantry medium machine gun role. The M60-based designs have a long history of insufficient reliability, however. Trials conducted through the mid-1990s led the U.S. Army to replace its M60 with M240B GPMGs. The M240B weighs in at ~27.5 lb and is about 49 inches long with the standard barrel. Due to this extra weight and size NAVSPECWAR was reluctant to give up the increased portability of the M60 (~22.5 lb, 37.7 inches OAL with the shortest "Assault Barrel") designs, despite the M240's increased reliability. A request was put in for a new machine gun in 2001, and FN responded with a scaled-up version of the M249 weighing in at ~18.5 lb with an OAL of ~39.5". This new design achieved much better reliability than the M60-based weapons while bettering its light weight and maintaining the same manual of arms as the already in-use M249. USSOCOM was slated to begin receiving deliveries of the new gun in August 2003.
Mk 48 Mod 1
US Air Force Staff Sergeant with the Mk 48 Mod 1 in Afghanistan, 2011
The Mk 48 Mod 1 is an update of the Mk 48 Mod 0, which is also made in FN-America. Like the Mod 0, it is essentially an M249 scaled up to fire the 7.62×51mm NATO round. The Mod 1 utilizes a 19.75-inch barrel, weighs in at 18.37 lb unloaded. Major changes include the use of an adjustable buttstock, modified rail interface system, removal of the original hinged heat guard in favor of M249-style ones attached to the barrel, and modified bipod mount.
Mk 48 Mod 2
At the National Defense Industry Association's annual Special Operations Forces Industry Conference (SOFIC), in May 2019, FN unveiled a prototype of its Mk 48 Mod 2 machine gun chambered for 6.5mm Creedmoor. It was developed in response to a USSOCOM requirement. American special operations forces are interested in acquiring a lightweight belt-fed "assault" machine gun, which would offer better range than existing weapons. Current production model is still chambered in 7.62×51mm NATO caliber.
Mk 48 Mod 0
India: Indian special forces
Czechia: 601st Special Forces Group
United States: Army Rangers and Navy SEALs