Misplaced Pages

Mega II

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Custom chip from Apple Computer
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Mega II" – news · newspapers · books · scholar · JSTOR (June 2019) (Learn how and when to remove this message)
This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources.
Find sources: "Mega II" – news · newspapers · books · scholar · JSTOR (April 2023)
This article relies excessively on references to primary sources. Please improve this article by adding secondary or tertiary sources.
Find sources: "Mega II" – news · newspapers · books · scholar · JSTOR (April 2023) (Learn how and when to remove this message)
(Learn how and when to remove this message)

The Mega II is a custom chip from Apple Computer that is essentially an entire Apple II computer-on-a-chip. At least three products from Apple made use of the chip between 1986 and 1995. It was most predominantly used in the Apple IIGS microcomputer, and the basis for a modified variant, called the "Gemini" chip, which was later used in the Apple IIe Card for the Macintosh LC. This custom application-specific integrated circuit (ASIC) integrated most of the circuitry from earlier Apple II models onto one 84-pin PLCC integrated circuit, drastically simplifying design and cost for Apple. The Mega II contained the functional equivalent of an entire Apple IIe computer (sans processor), which, combined with the 65C02 emulation mode of the 65C816 processor, plus ROM and RAM, provided full support for legacy (8-bit) Apple II software in the Apple IIGS. The result was one of the earliest single chip examples of full system hardware emulation.

The Mega II has the built-in equivalent of the IOU and memory management unit (MMU) chips, video and keyboard ROMs (with support for other display languages) and likely the keyboard encoder found in the IIe. It also has a built-in keyboard and mouse controller (neither were used in the Apple IIGS). Potentially the Mega II could have been used to produce future models of the 8-bit Apple II with a very low chip count (and reduced physical size) but instead was used for IIe emulation on the Apple IIGS and Macintosh LC with plug-in card, which used a similar all-in-one IC based on it. It was also used as support circuitry on the Apple II Video Overlay Card.

History

In 1984, after the cancellation of the Apple IIx project, Dan Hillman and Jay Rickard, engineers at Apple, were assigned to lower the cost of the Apple II. They were able to compress the design of almost the entire Apple II onto one chip which they named Mega II. When the 16-bit Apple IIGS project came onto the table, the virtually completed design of the Mega II was a clear starting point for seamless backwards 8-bit system compatibility.

References

  1. Apple II History, Chapter 10 - The Apple IIGS
Category: