Misplaced Pages

Mercedes-Benz W120/W121
Mercedes-Benz 180b (W120)
Overview
Manufacturer	Daimler-Benz
Production	1953–1962 442,963 built
Assembly	Germany  Australia: Port Melbourne  South Africa: East London
Body and chassis
Class	Executive car (E)
Body style	4-door sedan
Layout	FR layout
Related	Mercedes-Benz W105 — 219 Mercedes-Benz W180 — 220a/S Mercedes-Benz W128 — 220SE
Dimensions
Wheelbase	2,650 mm (104.3 in)
Length	180: 4,460 mm (175.6 in) 180 a / 190: 4,485 mm (176.6 in) 180 b/c, 190 b: 4,500 mm (177.2 in)
Width	1,740 mm (68.5 in)
Height	1,560 mm (61.4 in)
Curb weight	1,150 kg (2,540 lb)—1,220 kg (2,690 lb)
Chronology
Predecessor	Mercedes-Benz W136 Mercedes-Benz W191
Successor	Mercedes-Benz W110

The Mercedes-Benz W120 and Mercedes-Benz W121 are technically similar inline-four cylinder sedans made by Daimler-Benz. The W120 was first introduced by Mercedes-Benz in 1953. Powered initially by the company's existing 1.8 liter M136 engine, it was sold as the Mercedes-Benz 180 through 1962. From 1954, Mercedes-Benz also offered the W120 with a diesel engine as the Mercedes-Benz 180 D. The Mercedes-Benz W121 was introduced as the Mercedes-Benz 190 in 1956, powered by a 1.9 liter M121 engine. From 1958, the W121 was also offered with an OM621 engine, sold as the Mercedes-Benz 190 D through 1961.

The W120 was nicknamed the Ponton (along with other Mercedes models) after its introduction, because it employed ponton, or pontoon styling, a prominent styling trend that unified a car's previously articulated hood, body, fenders and running boards into a singular envelope.

Together with the longer wheelbase and more luxurious 2.2-liter inline-six cylinder W128 model 220, they constituted 80 percent of Mercedes-Benz' car production between 1953 and 1959.

The W120 was the first predecessor to the medium size Mercedes-Benz E-Class sedan line.

History

The base, four-cylinder 180/190 and the W105 six-cylinder 219 Ponton models looked very similar in appearance, from the rear doors forward, to the more luxury W128 and W180 stretched wheelbase six-cylinder 220a and 220 S(E) models. From behind, one could not easily differentiate even the top-of-the-line 220SE (E for 'Einspritzung', or fuel injection) from a base 180 model, but the longer bonnet (and wheelbase), and chrome touches identified it as an upscale, six-cylinder model.

The 1951 to 1957 Mercedes-Benz 300 W186 Adenauer company flagship used a much larger frame and body, and was an entirely different car.

The 180 and 190 four-cylinders were widely used as German taxis. Only these shorter Pontons featured low-wattage parking clearance lights at front bumper top rear. A simple left-right toggle above and to the left of the driver's knee selected which side would illuminate, so as not to needlessly run down the battery in winter, no small concern when restarting diesels. Heater air intakes were on both sides of the radiator grille only on the W120/W121.

The form and body of the car changed little during its production run. However, in 1957, a year after the introduction of the 190 saloon, the 180's 56 PS (41 kW; 55 hp) M136 engine, which had originally been designed for the Mercedes-Benz 170 Sb, was replaced with a downtuned version of the 190's M 121. The same year, the Mercedes star atop the faux external radiator cap was made spring-loaded to give when bumped: reports at the time indicated that this was either to pander to the requirements of certain export markets, notably Switzerland, or to reduce the risk of pedestrian injury in the event of an accident. By 1959, the star was spring-retained on a ball base.

A related roadster variant, the R121, better known as the 190SL, was produced from 1955 to 1963.

At the 1959 Frankfurt Motor Show, in time for the 1960 US model year, a slightly wider grille and slimmer taillights were introduced. The same wider grille was carried forward to the car's (in other respects) more flamboyantly styled successors, when the Pontons were replaced by the W110 "Fintail" models during 1961.

At the time, Studebaker-Packard had an agreement with Mercedes-Benz to distribute their cars in the US market. A prototype was built based on the W120 with Packard-styled headlights similar to those fitted on the Packard Patrician. This prototype was called the W122 but it never reached the production state; This was likely because the W120 platform that the prototype was based on was reaching the end of its life cycle, while the compact luxury sector was not that developed in the US market yet.

Technical description

The Mercedes-Benz W120 and W121 are four-door saloons with a longitudinal front engine, and rear-wheel drive. Rolling chassis with either two or four doors were also available from the factory. The cars have a self-supporting body, the so-called "Ponton" body. The wheelbase measures 2650 mm, which is slightly less than the larger "Ponton" saloons' 2750 mm. In front, the W 120 and W 121 have independent double-wishbone suspension, in rear, they have either a double-joint swing axle (until September 1955), or a single-joint swing axle (from September 1955). Both front and rear wheels are coil-sprung; the front axle is fitted with a torsion-type anti-sway bar, and the rear wheels have additional hydraulic shock absorbers. Daimler-Benz installed a recirculating ball steering system and a hydraulic drum braking system in the 120- and 121-series.

Mercedes-Benz built the W120 with all of their then-present four-cylinder engines: the M136 and M121 Otto (spark ignition) engines, and the OM636 and OM621 Diesel (compression ignition) engines, with most W120 and W121 cars powered by either of the Diesel engines. The torque is sent from the engine to the rear wheels through a dry single-disc clutch and a synchronised, four-speed constant-mesh gearbox. The shift lever is a rather small lever mounted on the steering column.

Models

References

• "Mercedes 180-D". Road & Track (1959 Road Test Annual): 81–83.

1. An Australian Mercedes-Benz? - www.mbspares.com.au Retrieved on 31 October 2012
2. Morelli-Bertier, Michèle (1998-12-17). "Raisonnable passion" [Rational passion]. Rétro Hebdo (in French) (89). Paris, France: 30.
3. https://mercedes-benz-publicarchive.com/marsClassic/en/instance/ko/Ponton-Mercedes-four-cylinder-models-W-120-W-121-1953---1959.xhtml?oid=5131 "Ponton Mercedes", four-cylinder models (W 120, W 121), 1953 - 1959
4. Simoneit, Ferdinand, ed. (1977). "Vor 20 Jahren: Auto Motor u. Sport in Heft 23 und 24 / 1957" [20 years ago: AMS in issues 23 and 24, 1957]. Auto Motor und Sport (in German) (23). Stuttgart: Vereinigte Motor-Verlag GmbH & Co KG: 6.
5. http://www.mbzponton.org//valueadded/other/radiator/shell.htm Mercedes-Benz Ponton Radiator Grille Shell Evolution
6. Alexeyev, Stanislav (31 May 2015). "Design History: Packard's Request, Almost Fulfilled By Mercedes-Benz". curbsideclassic.com. Retrieved 12 May 2022.
7. ^ Daimler AG (ed.): 180 D / W 120 D I, 1954 - 1959, in Mercedes-Benz Public Archive, retrieved 8 January 2021
8. according to: Werner Oswald: Deutsche Autos 1945-1990, vol.5. Motorbuch Verlag, Stuttgart 2001, ISBN 3-613-02131-5, p. 32.

External links

• the W120 Ponton presented by Mercedes-Benz Classic Center USA

• Mercedes-Benz model codes
• Mercedes-Benz vehicles
• Rear-wheel-drive vehicles
• Sedans
• Roadsters
• 1960s cars
• Cars introduced in 1953
• Limousines