Negative pulldown - Misplaced Pages

Manner of exposing motion picture film that determines aspect ratio

This article's tone or style may not reflect the encyclopedic tone used on Misplaced Pages. See Misplaced Pages's guide to writing better articles for suggestions. (March 2023) (Learn how and when to remove this message)

Negative pulldown is the manner in which an image is exposed on a film stock, described by the number of film perforations spanned by an individual frame. It can also describe whether the image captured on the negative is oriented horizontally or vertically. Changing the number of exposed perforations allows a cinematographer to change both the aspect ratio of the image and the size of the area on the film stock that the image occupies (which affects image clarity).

The most common negative pulldowns for 35 mm film are 4-perf and 3-perf, the latter of which is usually used in conjunction with Super 35. 2-perf, used in Techniscope in the 1960s, is enjoying a slight resurgence due to the birth of digital intermediate techniques eliminating the need for optical lab work. Vertical pulldown is overwhelmingly the dominant axis of motion in cinematography, although horizontal pulldown is used in IMAX, VistaVision (still in use for some visual effects work), and in 35 mm consumer and professional still cameras.

Usage of various formats

History

The majority of 35 mm film systems, cameras, telecine equipment, optical printers, or projectors, are configured to accommodate the 4-perf system; each frame of 35 mm is 4 perforations long. 4-perf was (and remains) the traditional system, and the majority of projectors are based on 4-perf, because 4 perforations is the amount needed per frame vertically in order to have enough negative space for a roughly squarish image, which became the silent film standard aspect ratio of 1.33:1.

Later, when the film industry was facing the perceived threat of obsolescence to television, universally a 1.33:1 aspect ratio at the time (and remained so in many countries until the introduction of DTV), studios started experimenting with various competing widescreen formats.

Current practice

Eventually, aspect ratios of 1.85:1 in North America and 1.66:1 in Europe became standard for 35 mm productions shot with normal non-anamorphic lenses. However, the aspect ratio for these films is not created within the camera itself but is achieved during projection by placing a cropping device, known as an aperture mask, over the film. As a result, most films are shot in full-screen format—commonly, though inaccurately, referred to as 1.33:1 but actually 1.37:1 due to the inclusion of soundtracks—while being composed for aspect ratios such as 1.85:1 or 1.66:1. These films are then cropped to the desired aspect ratio during projection. Consequently, a significant portion of the film is unused, as the cropped top and bottom sections are typically not intended to be displayed unless the film was specifically protected for full-screen presentation. The 3-perf and 2-perf systems are employed only during the origination and post-production transfer stages.

35 mm

2-perf

Main article: Techniscope

2-perf camera systems use 2 perforations per frame on 35 mm film with an aspect ratio close to 2.39:1; the aspect ratio used in anamorphic prints. It was first proposed conceptually around 1930, but was not put into practice until 1961, when Techniscope was developed at Technicolor's Italian branch. It has recently been brought up again with the advent of higher quality, lower grain film stocks as well as digital intermediate post-production methods which eliminate optical blowups and thus improve quality. While in the recent past, some companies have offered custom conversions of camera equipment to 2-perf, it appears that camera manufacturers are now poised to support the format. Arri made 2-perf movement blocks for their Arricam and Arriflex 235 cameras available for rental in March 2007. Aaton's Penelope camera, released in October 2008, was the first camera specifically designed for 2-perf usage (as well as 3-perf).

3-perf

Main article: Super 35

In the early 1980s, Swedish cinematographer Rune Ericson collaborated with Panavision on the concept of creating a 3-perf mechanism for motion picture cameras. The 3-perf system, achieved by altering the camera gate and shutter mechanism, reduces film wastage by using frames that are 3 perforations high instead of the standard 4-perforations. This results in an aspect ratio of approximately 1.85:1, which closely aligns with the widescreen television aspect ratio of 1.78:1, thereby minimizing image loss outside this aspect ratio. Due to the smaller frame size, the camera operates about 25% slower, leading to a 25% reduction in film stock usage. Additionally, the camera operates more quietly because less film passes through the mechanism per frame. The Super 35 variant of 3-perf also provides a larger negative area, which can help offset the increase in grain when using higher-speed film stocks.

In the late 1990s, cinematographer Vittorio Storaro proposed a film standard known as Univisium (also called Univision), which advocated for 3-perf Super 35 to create a 2.00:1 aspect ratio.

Disadvantages of 3-perf and 2-perf

One disadvantage of 3-perf and 2-perf is found when projected theatrically, as it needs to be transferred back to a 4-perf system. This typically involves a film print with black cropping on the print itself in order to fit the image onto a 4-perf frame – encountering the same wastage problem as before. Even so, the amount of film shot on a production is much greater than the length of the final film, so 3-perf or 2-perf are still viable cost-saving options for production. Generally, 3-perf is most frequently used for widescreen television productions shot on film, as film is developed and then transferred to video, rendering projection incompatibilities irrelevant. Recently, this process has become popular with big-budget motion picture production, due to the advent of the digital intermediate process. The negative is scanned to high resolution (usually HD, 2K or 4K (digital cinema)) digital files, colour graded, and ultimately printed back to standard 4-perf for projection. At some point in the future, the final 4-perf print will become unnecessary assuming the cinema distribution and projection chain become fully digital.

3-perf and 2-perf pose minor problems for visual effects work. The area of the film in 4-perf work that is not projected nonetheless contains picture information which is useful for such visual effects tasks as 2D and 3D tracking. This mildly complicates certain visual effects efforts for productions using 3-perf and 2-perf.

VistaVision

Main article: VistaVision

VistaVision is a higher resolution, widescreen variant of the 35 mm motion picture film format which was created by Paramount Pictures in 1954. It uses a horizontal, 8 perforation 35 mm image, similar to that used in 135 film for still photography. Paramount did not use anamorphic processes such as CinemaScope but refined the quality of their flat widescreen system by orienting the 35 mm negative horizontally in the camera gate and shooting onto a larger area, which yielded a finer-grained projection print.

70 mm

Main article: 70 mm film

Standard 65 mm (5/70) (Todd-AO, Super Panavision)

spherical lenses
5 perforations/frame
42 frames/meter (12.8 frame/ft)
34.29 meters/minute (112.5 ft/minute)
vertical pulldown
24 frames/second
camera aperture: 52.48 by 23.01 mm (2.066 by 0.906 in)
projection aperture: 48.56 by 20.73 mm (1.912 by 0.816 in)
305 m (1000 feet), about 9 minutes at 24 frame/s = 4.5 kg (10 pounds) in can
aspect ratio: 2.2:1

Ultra Panavision 70 (MGM Camera 65)

Main article: Ultra Panavision 70

Same as Standard 65 mm except

Shot with special anamorphic adapter in front of lens
1.25× squeeze factor, projected aspect ratio 2.76:1

Showscan

Main article: Showscan