Misplaced Pages

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Nesting algorithm" – news · newspapers · books · scholar · JSTOR (September 2015) (Learn how and when to remove this message)

Nesting algorithms are used to make the most efficient use of material or space. This could for instance be done by evaluating many different possible combinations via recursion.

1. Linear (1-dimensional): The simplest of the algorithms illustrated here. For an existing set there is only one position where a new cut can be placed – at the end of the last cut. Validation of a combination involves a simple Stock - Yield - Kerf = Scrap calculation.
2. Plate (2-dimensional): These algorithms are significantly more complex. For an existing set, there may be as many as eight positions where a new cut may be introduced next to each existing cut, and if the new cut is not perfectly square then different rotations may need to be checked. Validation of a potential combination involves checking for intersections between two-dimensional objects.
3. Packing (3-dimensional): These algorithms are the most complex illustrated here due to the larger number of possible combinations. Validation of a potential combination involves checking for intersections between three-dimensional objects.

References

1. ^ Herrmann, Jeffrey; Delalio, David. "Algorithms for Sheet Metal Nesting" (PDF). IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION. Retrieved 29 August 2015.

This scientific software article is a stub. You can help Misplaced Pages by expanding it.

• v
• t
• e

• Geometric algorithms
• Science software stubs