Misplaced Pages

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "PC System Design Guide" – news · newspapers · books · scholar · JSTOR (April 2023) (Learn how and when to remove this message)

The PC System Design Guide (also known as the PC-97, PC-98, PC-99, or PC 2001 specification) is a series of hardware design requirements and recommendations for IBM PC compatible personal computers, compiled by Microsoft and Intel Corporation during 1997–2001. They were aimed at helping manufacturers provide hardware that made the best use of the capabilities of the Microsoft Windows operating system, and to simplify setup and use of such computers.

Every part of a standard computer and the most common kinds of peripheral devices are defined with specific requirements. Systems and devices that meet the specification should be automatically recognized and configured by the operating system.

Versions

Four versions of the PC System Design Guide were released. In PC-97, a distinction was made between the requirements of a Basic PC, a Workstation PC and an Entertainment PC. In PC-98, the Mobile PC was added as a category. In PC 2001, the Entertainment PC was dropped.

PC-97

Required:

• 120 MHz Pentium, MIPS R4x00, Digital Alpha 21064 (EV4) or IBM PowerPC architecture (latter three only under Windows NT)
• 16 MB RAM

Initial version.

• Introduced color code for PS/2 keyboard (purple) and PS/2 mouse (green) connectors

PC-98

(Not to be confused with NEC's incompatible PC-98 series)

Aimed at systems to be used with Windows 98 or Windows 2000. Required:

• 200 MHz Pentium processor with MMX technology (or equivalent performance)
• 256 KB L2 cache
• 32 MB RAM (recommended: 64 MB of 66 MHz DRAM)
• ACPI 1.0 (including power button behavior)
• Fast BIOS power-up (limited RAM test, no floppy test, minimal startup display, etc.)
• BIOS Y2K compliance
• PXE preboot environment

It was published as ISBN 1-57231-716-7.

PC-99

Required:

• 300 MHz CPU
• 64 MB RAM
• USB
• Comprehensive color-coding scheme for ports and connectors (see below)

Strongly discouraged:

• Non plug-and-play hardware
• ISA slots

It was published as ISBN 0-7356-0518-1.

PC 2001

Required:

• 667 MHz CPU
• 64 MB RAM

Final version. First to require IO-APICs to be enabled on all desktop systems. Places a greatly increased emphasis on legacy-reduced and legacy-free systems. Some "legacy" items such as ISA expansion slots and device dependence on MS-DOS are forbidden entirely, while others are merely strongly discouraged.

PC 2001 removes compatibility for the A20 line: "If A20M# generation logic is still present in the system, this logic must be terminated such that software writes to I/O port 92, bit 1, do not result in A20M# being asserted to the processor."

Color-coding scheme for connectors and ports

Perhaps the most end-user visible and lasting impact of PC 99 was that it introduced a color code for the various standard types of plugs and connectors used on PCs. As many of the connectors look very similar, particularly to a novice PC user, this made it far easier for people to connect peripherals to the correct ports on a PC. This color code was gradually adopted by almost all PC and motherboard manufacturers. Some of the color codes have also been widely adopted by peripheral manufacturers.

See also

• ATX
• Legacy-free PC
• Multimedia PC
• Sound card
• IBM PC–compatible
• PoweredUSB (proprietary high-power USB extension using other color-coded ports)

References

1. Robert Bruce Thompson; Barbara Fritchman Thompson (24 July 2003). PC Hardware in a Nutshell (3rd ed.). O'Reilly & Associates, Inc. p. 1.1 PCs Defined. ISBN 0-596-00513-X. Archived from the original on July 11, 2011. Retrieved January 4, 2011.
2. "Chapter 3 PC System". PC 2001 System Design Guide (PDF). Intel Corporation and Microsoft Corporation. p. 52. Retrieved 2023-06-03. SYS–0047. A20M# is always de-asserted (pulled high) at the processor
3. PC 99 System Design Guide, Intel Corporation and Microsoft Corporation, 14 July 1999. Chapter 3: PC 99 basic requirements (PC 99 System Design Guide (Self-extracting .exe archive). Requirement 3.18.3: Systems use a color-coding scheme for connectors and ports. Accessed 2009-02-05

External links

• Legacy PC Design Guides – Microsoft Download Center

PDF versions:

• PC-97 System Design Guide
• PC-98 System Design Guide
• PC-99 System Design Guide
• PC 2001 System Design Guide

• Color codes
• Computer standards
• IBM PC compatibles