Misplaced Pages

The pedal steel guitar is a console-type of steel guitar with pedals and knee levers that change the pitch of certain strings to enable playing more varied and complex music than other steel guitar designs. Like all steel guitars, it can play unlimited glissandi (sliding notes) and deep vibrati—characteristics it shares with the human voice. Pedal steel is most commonly associated with Country music and Hawaiian music.

Pedals were added to a lap steel guitar in 1940, allowing the performer to play a major scale without moving the bar and also to push the pedals while striking a chord, making passing notes slur or bend up into harmony with existing notes. The latter creates a unique sound that has been popular in country and western music— a sound not previously possible on steel guitars before pedals were added.

From its first use in Hawaii in the 19th century, the steel guitar sound became popular in the United States in the first half of the 20th century and spawned a family of instruments designed specifically to be played with the guitar in a horizontal position, also known as "Hawaiian-style". The first instrument in this chronology was the Hawaiian guitar also called a lap steel; next was a lap steel with a resonator to make it louder, first made by National and Dobro Corporation. The electric guitar pickup was invented in 1934, allowing steel guitars to be heard equally with other instruments. Electronic amplification enabled subsequent development of the electrified lap steel, then the console steel, and finally the pedal steel guitar.

Playing the pedal steel requires simultaneous coordination of both hands, both feet and both knees (knees operate levers on medial and lateral sides of each knee); the only other instrument with similar requirements is the American reed organ. Pioneers in the development of the instrument include Buddy Emmons, Jimmy Day, Bud Isaacs, Zane Beck, and Paul Bigsby. In addition to American country music, the instrument is used in sacred music in the eastern and southern United States (called Sacred Steel), jazz, and Nigerian Music.

Early history and evolution

In the late 19th century, Spanish guitars were introduced in the Hawaiian Islands by European sailors and Mexican "vaqueros". Hawaiians did not embrace the standard guitar tuning that had been in use upon their introduction. Rather, they re-tuned the guitars to make them sound a major chord when all six strings were strummed, now known as an "open tuning". The term for this is "slack-key" because certain strings were "slackened" to achieve it. To change chords, they used some smooth object, usually a piece of pipe or metal, sliding it over the strings to the fourth or fifth position, easily playing a three-chord song. It is physically difficult to hold a steel bar against the strings while holding the guitar against the body and the Hawaiians laid the guitar across the lap and played it while sitting. Playing this way became popular throughout Hawaii and spread internationally.

Electrific amplification

Hawaiian lap steel guitars were not loud enough to compete with other instruments, a problem that many inventors were trying to remedy. In Los Angeles in the 1920s, a steel guitar player named George Beauchamp saw some inventions which added a horn, like a megaphone, to steel guitars to make them louder. Beauchamp became interested, and went to a shop near his home to learn more. The shop was owned by a violin repairman named John Dopyera. Dopyera and his brother Rudy, showed Beauchamp a prototype of theirs which looked like a big Victrola horn attached to a guitar, but it was not successful. Their next attempt yielded some success with a resonator cone, resembling a large metal loudspeaker, attached under the bridge of the guitar. Buoyed by their success, Beauchamp joined the Dopyera brothers in forming a company to pursue their invention. The new resonator invention was promoted at a lavish party in Los Angeles and demonstrated by the well-known Hawaiian steel player Sol Hoopii. An investor wrote a check for $12,000 that very night.

A factory was built to manufacture metal-body guitars with the new resonators. Money problems and disagreements followed, and the Doperyas won a legal battle against Beauchamp over the company, then went on their own to form "the Dobro Corporation", Dobro being an acronym for DOpyera and BROthers. Beauchamp was out of a job. He had been thinking about an "electric guitar" for years, and at least part of the dispute with the Dopyeras was over him spending too much time on the electrification idea and not enough on improving the resonator guitar. Beauchamp enrolled in electronics courses and, for his first effort, he made a single-string guitar out of a 2x4 piece of lumber and experimented with phonograph pickups, but had no success. He eventually came up with the idea of using two horseshoe magnets encircling the guitar strings like a bracelet, and six small metal rods wrapped with wire to concentrate the magnetic field (one under each guitar string).

When connected to an electronic amplifier and loudspeaker, it worked. He enlisted the aid of a skilled craftsman to fashion a guitar neck and body to connect to his device. The final construct, he thought, resembled a frying pan, and that is what the instrument was nicknamed. He applied for patent June 2, 1934 and received it on August 10, 1937. Beauchamp asked a nearby engineer named Adolph Rickenbacker to help manufacture the product and together they founded a company first named "Ro-Pat-In", soon changed to "ElectroString". The guitar brand was called "Rickenbacker" because they thought the name was easier to pronounce than "Beauchamp" (pronounced Beecham) and because Adolph's cousin, Eddie Rickenbacker, an American pilot and WWI flying ace, was a well-known name in the U.S. at that time.

In 1931, the Great Depression was at its worst, and people were not buying guitars; in addition, the patent office delayed on the application, in part because they had no category for the invention—was it a musical instrument or an electrical device? Electrostring's competitors infringed on the patent, but the owners did not have the money to litigate the infringements. Beauchamp was ultimately deprived of economic benefit for his invention because his competitors rapidly improved on it making his specific patent obsolete. Electrostring's most successful product was the Hawaiian guitar (lap steel) A22 "Frying Pan", the first electrified instrument of any kind — made with a metal body, smaller than a traditional Spanish guitar, to be played on the musician's lap.

Two additional breakthroughs emerged: One, the guitar amplifier, which had to be purchased in order to use the invention; and two, perhaps unrealized at the time, that electrified guitars no longer had to have the traditional guitar shape—this profoundly influenced electric guitar designs forever forward.

Lap steel

The first lap steels had a smaller body, but still retained a guitar-like shape. Instrument makers rapidly began making them into a rectangular block of wood with an electric pickup, the precursor of the pedal steel. According to music writer Michael Ross, the first electrified stringed instrument on a commercial recording was a western swing tune by Bob Dunn in 1935. He recorded with Milton Brown and his Musical Brownies. Brown has been called "The father of western swing" The inherent limitation of the lap steel was its constraint to very limited chords not changeable during a performance without re-tuning. For that reason, scores of different tunings are available for lap steel players.

Lap steel becomes console steel

The next problem to be dealt with was the need to play with different voicings on the same guitar; i.e., the way the strings are tuned. The only way to accomplish this at the time was the addition of a duplicate neck and strings on the same instrument, tuned differently.

Players continued to add more necks, eventually getting up to four. This meant a bigger and heavier instrument, now called a "console" which necessitated putting it on a stand or legs rather than the performer's lap. Noel Boggs, a lap steel player with Bob Wills, received the first steel guitar made by instrument maker Leo Fender in 1953. Fender relied on prominent performers to field test his instruments. Boggs was one of the first players to switch to a different neck during a solo. Leon McAuliffe, composer of "Steel Guitar Rag", also played with Bob Wills, and used a multi-neck steel guitar. When Wills said his well-known tag line, "Take it away, Leon", he was referring to McAuliffe. A Fender Stringmaster triple-neck console steel was heard in a number one hit song in 1959,"Sleep Walk", a steel guitar instrumental by Santo and Johnny, the Farina Brothers.

Console steel becomes pedal steel

The expense of building multiple necks on the same instrument made them unaffordable for most players, and a more sophisticated solution was needed. At this point, the goal was simply to create a pedal that would change the pitch of all the strings at once to emulate a second neck. In 1939, a guitar called the "Electradaire" featured a pedal controlling a solenoid, triggering an electrical apparatus to change the tension on the strings. This was not successful. That same year, bandleader Alvino Rey worked with a machinist to design pedals to change the pitch of strings but was without success. The Harlan Brothers of Indianapolis created the "Multi-Kord" with a universal pedal that could fairly easily be configured to adjust the pitch of any or all strings, but was extremely hard to push when tensioning all strings at once. The Gibson Guitar Company introduced the "Electraharp" in 1940, which featured pedals radially oriented from a single axis at the instrument's left rear leg. The instrument was not popular and only 43 were sold before production was halted, but the U.S. entry into World War II played a part in lack of demand. After WW II, Gibson redesigned and reintroduced the Electraharp and Bud Isaacs used one on the song "Big Blue Diamonds" for King Records.

The most successful pedal system from the various contenders was designed about 1948 by Paul Bigsby, a motorcycle shop foreman and racer who also invented the commercially successful Spanish guitar vibrato tailpiece. Bigsby put pedals on a rack between the two front legs of the steel guitar. The pedals operated a mechanical linkage to apply tension to raise the pitch of the strings.

Bigsby built guitars incorporating his design for the foremost steel players of the day, including Speedy West, Noel Boggs, and Bud Isaacs, but Bigsby was a one-man operation working out of his garage at age 56, and not capable of keeping up with demand. One of Bigsby's first guitars was used on "Candy Kisses" in 1949 by Eddie Kirk. The second model Bigsby made went to Speedy West, who used it extensively.

Pedal steel in country music: the birth of a new sound

In 1953, Bud Isaacs received one of Bigsby's new creations, a double-neck steel which featured pedals to change the pitch of only two strings. Isaacs was the first to push the pedal while notes were still sounding. Other steel players strictly avoided doing this, because it was considered "un-Hawaiian".

When Isaacs first used the setup on the 1953 recording of Webb Pierce's song "Slowly", he pushed the pedal while playing a chord, so notes could be heard bending up from below into the existing chord to harmonize with the other strings, creating a stunning effect which had not been possible with the older (non-pedal) lap steels. Of this recording of "Slowly", steel guitar virtuoso Lloyd Green said, "This fellow, Bud Isaacs, had thrown a new tool into musical thinking about the steel with the advent of this record that still reverberates to this day." It was the birth of the future sound of country music and caused a virtual revolution among steel players who wanted to duplicate it.

Also in the 1950s, steel guitar hall-of-famer Zane Beck added knee levers to the pedal steel guitar capable of bending notes downward. The player can move each knee either right, left or up (depending on the model) triggering different pitch changes. The levers function basically the same as foot pedals, and may be used alone, in combination with the other knee, or more commonly, in combination with one or two foot pedals. They were first added to Ray Noren's console steel. Initially, the knee levers just lowered the pitch, but in later years with refinements, could raise or lower pitch.

Buddy Emmons' contributions to pedal steel

When "Slowly" was released, Bigsby was in the process of building a guitar for steel virtuoso Buddy Emmons. Emmons heard Isaacs' performance on the song, and told Bigsby to make his guitar setup to split the function of Isaacs' single pedal into two pedals, each controlling a different string. This gave the advantages of making chords without having to slant or move the bar, e.g., minors and suspended chords. Jimmy Day, another prominent steel player of the day, did the same thing, but reversed which strings were affected by the two pedals. This prompted future manufacturers to ask customers if they wanted a "Day" or an "Emmons" setup. In 1957, Emmons partnered with guitarist/machinist Harold "Shot" Jackson to form the Sho-Bud company, the first company devoted solely to pedal steel guitar manufacture.

Emmons made other innovations to the steel guitar, adding two additional strings (known as "chromatics") and a third pedal, changes which have been adopted as standard in the modern-day E9 instrument. The additional strings allow the player to play a major scale without moving the bar. He also developed and patented a mechanism to raise and lower the pitch of a string on a steel guitar and return to the original pitch without going out of tune. The Sho-Bud instruments of the day had all the latest features: 10 strings, the third pedal, and the knee levers.

Modern pedal steel

The pedal steel continues to be an instrument in transition. In the United States, as of 2017, the E9 neck is more common, but most pedal steels still have two necks. The C6 is typically used for western swing music and the E9 neck is more often used for country music. The different necks have distinctly different voicings. The C6 has a wider pitch range than the E9, mostly on the lower notes.

Certain players prefer different setups regarding which function the pedals and levers perform, and which string tuning is preferred. In the early 1970s, musician Tom Bradshaw coined the term copedent (/koʊˈpiːdənt/ koh-PEE-dənt), a portmanteau of "chord-pedal-arrangement". Often represented in table form, it is a way of specifying the instrument's tuning, pedal and lever setup, string gauges and string windings.

There are proponents of a "universal tuning" to combine the two most popular modern tunings (E9 and C6) into a single 12 or 14-string neck that encompasses some features of each. It was developed by Maurice Anderson and later modified by Larry Bell. By lowering the C6 tuning a half-step to make it a B6, many commonalities with the E9 tuning are achieved on the same neck and it is called the E9/B6 tuning.

Use in non-traditional genres

The pedal steel is most commonly associated with American country music, but it is also sometimes heard in jazz, sacred music, popular music, nu jazz, and African music. In the United States in the 1930s, during the steel guitar's wave of popularity, the instrument was introduced into the House of God, a branch of an African-American Pentecostal denomination, based primarily in Nashville and Indianapolis. The sound bore no resemblance to typical American country music. The steel guitar was embraced by the congregation and often took the place of an organ. The first documented use of a pedal (rather than lap) steel in this tradition was in 1952, but it did not become common until the early 1970s. This musical genre, known as "Sacred Steel" was largely unknown until, in the 1980s, a minister's son named Robert Randolph took up the instrument as a teenager, and has popularized it and received critical acclaim as a musician. Neil Strauss, writing in the New York Times, called Randolph "one of the most original and talented pedal steel guitarists of his generation.

The pedal steel guitar became a signature component of Nigerian Juju music in the late 1970s. Nigerian bandleader King Sunny Adé featured pedal steel guitar in his 17 piece band, which, wrote New York Times reviewer Jon Pareles, introduces "a twang or two from American blues and country" Norwegian jazz trumpeter Nils Petter Molvaer, considered a pioneer of Future jazz (a fusion of jazz and electronic music), released the album Switch, which features the pedal steel guitar.

See also

• Steel guitar
• Console steel guitar
• Lap steel guitar
• Electric guitar
• Frying Pan (guitar)
• Resonator guitar
• Slack-key guitar
• Slide guitar

Notes

1. Theoretically, it was "possible" on a lap steel, but not possible to play it rapidly with perfect intonation; the pedal version was immediately recognizable.
2. The Hawaiians also learned to play this re-tuned guitar without a steel, fretting it and holding it against the body like a traditional guitar. This led to its own genre known as slack-key guitar.

References

1. Miller, Tim Sterner; Stimeling, Travis D., Ed. (2017). The Oxford Handbook of Country Music. New York, NY: Oxford University Press. ISBN 9780190248178. Retrieved December 3, 2020.{{cite book}}: CS1 maint: multiple names: authors list (link)
2. ^ Ross, Michael (February 17, 2015). "Pedal to the Metal: A Short History of the Pedal Steel Guitar". Premier Guitar Magazine. Retrieved September 1, 2017.
3. ^ Fox, Margalit (March 5, 2008). "Ray Kane, Master of Slack-Key Guitar, Dies at 82". The New York Times. Retrieved December 11, 2017.
4. Owen, Jeff. "Standard Tuning: How EADGBE Came to Be". fender.com. Retrieved October 18, 2017.
5. Chapell, Jon. "Tuning for Slide Guitar: Standard or Open?". dummies.com. John Wiley & Sons. Retrieved October 18, 2017.
6. Peterson, Jeff. "Jeff Peterson Demonstrates Slack Key Guitar". jeffpetersonguitar.com. YouTube. Retrieved May 10, 2020.
7. ^ "The Earliest Days of the Electric Guitar". rickenbacker.com. Rickenbacker International. Retrieved September 7, 2017.
8. Drozdowski, Ted (December 18, 2012). "How Resonator Guitars Work and Sound So Cool". gibson.com. Gibson Brands. Archived from the original on November 19, 2015. Retrieved September 6, 2017.
9. ^ "First-ever electric guitar patent awarded to the Electro String Corporation". history.com. A&E Television Networks. Retrieved September 20, 2017.
10. Teagle, John (September 1997). "Antique Guitar Amps 1928–1934". Vintage Guitar Magazine. Retrieved September 8, 2017.
11. "Early History of the Steel Guitar". steelguitaracademy.com. Steel Guitar Academy. Retrieved 1 September 2017.
12. Foley, Hugh W. Jr. "Dunn, Robert Lee (1908–1971)". Encyclopedia of Oklahoma History & Culture. Oklahoma Historical Society. Archived from the original on September 5, 2008. Retrieved September 10, 2017.
13. Ginell, Cary (1994). Milton Brown and the Founding of Western Swing. Urbana, IL: Univ. of Illinois Press. ISBN 0-252-02041-3.
14. ^ Cundell, R. Guy S. (July 1, 2019). "Across the South: The origins and development of the steel guitar in western swing" (PDF). b0b.com. Adelaide, Australia: University of Adelaide. Retrieved November 29, 2020.
15. Bechtel, Brad. "Common Tunings For Lap Steel Guitar". people.well.com. Retrieved February 14, 2021.
16. ^ Brenner, Patrick. "Early History of the Steel Guitar". steelguitaramerica.com. Patrick Brenner. Retrieved June 29, 2017.
17. Meeker, Ward (November 2014). "Boggs' Quad". Vintage Guitar Magazine. Retrieved September 10, 2017.
18. Anderson, Maurice (2000). "Pedal Steel Guitar, Back and To the Future!". The Pedal Steel Pages. Retrieved September 16, 2017.
19. ^ Seymour, Bobbe (April 30, 2012). "Early History of the Pedal Steel Guitar". pedalsteelmusic.com. Steel Guitar Nashville. Retrieved September 13, 2017.
20. ^ Winston, Winnie; Keith, Bill (1975). Pedal steel guitar. New York: Oak Publications. p. 116. ISBN 978-0-8256-0169-9.
21. Ross, Michael (November 17, 2011). "Forgotten Heroes: Paul Bigsby". Premier Guitar Magazine. Retrieved September 11, 2017.
22. "Eddie Kirk". allmusic.com. AllMusic, member of the RhythmOne group. Retrieved September 11, 2017.
23. Miller, Tim Sterner (2017). The Oxford Handbook of Country Music. New York, NY: Oxford University Press. ISBN 9780190248178. Retrieved December 3, 2020.
24. Scott, Dewitt (1992). Back-Up Pedal Steel Guitar. Pacific, MO: Mel Bay. p. 41. ISBN 978-1-61911-598-9.
25. Jarnow, Jesse (January 7, 2020). "The Endless Potential Of The Pedal Steel Guitar, An Odd Duck By Any Measure". npr.org. National Public Radio. Retrieved January 18, 2021.
26. "What's This Part? Knee Levers". steelguitar.com. Retrieved September 20, 2017.
27. Hurt, Edd (July 30, 2015). "Remembering Steel Guitar Innovator Buddy Emmons". Nashville Scene.
28. Miller, Tim Sterner (2017). "9. This Machine Plays Country Music: Invention, Innovation, and the Pedal Steel Guitar". In Stimeling, Travis D. (ed.). The Oxford Handbook of Country Music. New York: Oxford University Press. ISBN 9780190248178.
29. Lee, Bobby (1996). "Basic Theory of the Standard E9th Tuning". The Pedal Steel Pages. Retrieved December 9, 2017.
30. Morris, Edward (July 30, 2015). "Steel Guitarist and Inventor Buddy Emmons Dead at 78". CMT. Viacom. Archived from the original on August 2, 2015. Retrieved June 23, 2017.
31. Brenner, Patrick (2011). "The Open Tuning". steelguitaramerica. Steel Guitar Academy. Retrieved September 12, 2017.
32. McDuffie, John Groover (October 28, 2010). "The Steel Guitar Forum/C6 vs E9". bb.steelguitarforum.com. Steel Guitar Forum. Retrieved September 12, 2017.
33. Bell, Larry. "The E9/B6 Universal Tuning". larrybell.org. Larry Bell. Retrieved September 12, 2017.
34. Fischer, John (January 27, 2016). "Hawaiian Steel Guitar". tripsavy.com. Tripsavy. Retrieved September 12, 2017.
35. ^ Stone, Robert L. (2010). Sacred steel : inside an African American steel guitar tradition. Urbana: University of Illinois Press. p. 2. ISBN 978-0252-03554-8.
36. Hansen, Liane; Wharton, Ned (August 5, 2001). "Heavenly 'Sacred Steel'". npr.org. NPR. Retrieved September 26, 2017.
37. Strauss, Neil (April 30, 2001). "Making Spirits Rock From Church to Clubland; A Gospel Pedal Steel Guitarist Dives Into Pop". The New York Times. Retrieved September 26, 2017.
38. "Juju and Pedal Steel". oldtimeparty.wordpress.com. WordPress. Retrieved September 9, 2017.
39. Pareles, Jon (May 15, 1987). "MUSIC: King Sunny Adé and Band from Nigeria". The New York Times. Retrieved September 15, 2017.
40. Molvaer, Nils Petter (March 11, 2014). "Nils Petter Molvaer releases album Switch". okeh-records.com. OKeh Records. Retrieved September 15, 2017.

External links

• Universal tuning
• The British Steelies Society Forum
• Steel Guitar Forum – A discussion site for pedal steel, lap steel, and related musical instruments
• Steel Guitar Jazz – A website featuring pedal and nonpedal steel guitar in jazz music – run by Jim Cohen
• www.pedalsteel.co.uk – website run by Bob Adams

• Electric guitars
• Steel guitar
• Box zithers
• Amplified instruments
• Continuous pitch instruments
• Pedal steel guitarists
• Sacred musical instruments
• 1940 musical instruments