Misplaced Pages

Santa Barbara Amorphous-15

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Silica-based ordered mesoporous material
This article may require copy editing for grammar, and to make it clearer to a non specialist. Several areas need expanding/clarification, for instance the SAXS/TEM. While I and many others know what these are, the general reader wont.. You can assist by editing it. (August 2024) (Learn how and when to remove this message)
Typical SBA-15 powder sample

SBA-15, an acronym for Santa Barbara Amorphous-15, is a silica-based ordered mesoporous material that was first synthesized by researchers at the university of California Santa Barbra in 1998. This material proved important for scientists in various fields such as material sciences, drug delivery, catalysis, fuel cells and many other due to its desirable properties and ease of production.

Synthesis procedure

The procedure is a typical Liquid-Crystal templating that consists of three steps:

The gel obtained in the second synthesis phase.
  1. Solution preparation — Pluronic P123 is dissolved in an acidic solution of water at specific molar ratios and the silica precursor typically TEOS or TMOS (sometimes EGMS) is added and mixed in for some time.
  2. Hydrothermal treatment — The solution is sealed in a container and subjected to a temperature T1 for about 24 hours and then a higher temp T2 for 48 hours.
  3. Washing and calcination — The gel obtained from the previous step is washed with water and ethanol under centrifuging, and finally calcinated at about 550 °C for 6 hours.

Structure

The interest in SBA-15 comes from the fact that its mostly mesopoures – meaning the pores are in the range of 2 nm to 50 nm according to the IUPAC definition and the fact that these pores have a well defined structure that is cylindrical shape in hexagonal ordering with their relatively thick pore walls which gives thermal stability.

The sorption isotherms of these materials, demonstrate typical hysteric behavior, which is still under discussion for its causes.

TEM

The transmission electron microscopy of the sample shows the cylindrical pores but also highlights then fact that the pores of this material exhibit geometric deformations.

SAXS

The small-angle X-ray scattering pattern shows typical Bragg peaks to the hexagonal structure of the material. The peak positions, is directly related to the lattice parameter.

q h k = 4 π a 3 h 2 + k 2 + h k {\displaystyle q_{hk}={\frac {4\pi }{a{\sqrt {3}}}}{\sqrt {h^{2}+k^{2}+hk}}}

where h and k are the miller indices.

  • TEM of a typical SBA-15 sample TEM of a typical SBA-15 sample
  • Demonstration of the hexagonal structure of SBA-15. Demonstration of the hexagonal structure of SBA-15.
  • Small angle x-ray scattering pattern of a SBA-15 sample(data from Haidar et al.) Small angle x-ray scattering pattern of a SBA-15 sample(data from Haidar et al.)
  • Typical isotherm SBA-15 sample, data from Haidar et al. Typical isotherm SBA-15 sample, data from Haidar et al.

References

  1. Zhao, Dongyuan; Feng, Jianglin; Huo, Qisheng; Melosh, Nicholas; Fredrickson, Glenn H.; Chmelka, Bradley F.; Stucky, Galen D. (1998-01-23). "Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores". Science. 279 (5350): 548–552. doi:10.1126/science.279.5350.548. ISSN 0036-8075. PMID 9438845.
  2. ^ Haidar, Ali F.; Belet, Artium; Goderis, Bart; Léonard, Alexandre F.; Gommes, Cedric J. (2024-08-20). "Small-Angle Scattering Indicates Equilibrium Instead of Metastable Capillary Condensation in SBA-15 Mesoporous Silica". Langmuir. 40 (33): 17444–17453. doi:10.1021/acs.langmuir.4c01609. hdl:2268/321325. ISSN 0743-7463. PMID 39110604.
  3. Song, S.-W.; Hidajat, K.; Kawi, S. (2005-10-01). "Functionalized SBA-15 Materials as Carriers for Controlled Drug Delivery: Influence of Surface Properties on Matrix−Drug Interactions". Langmuir. 21 (21): 9568–9575. doi:10.1021/la051167e. ISSN 0743-7463. PMID 16207037.
  4. Lai, Yuan T.; Chen, Tse C.; Lan, Yi K.; Chen, Bo S.; You, Jiann H.; Yang, Chia M.; Lai, Nien C.; Wu, Jia H.; Chen, Ching S. (2014-11-07). "Pt/SBA-15 as a Highly Efficient Catalyst for Catalytic Toluene Oxidation". ACS Catalysis. 4 (11): 3824–3836. doi:10.1021/cs500733j. ISSN 2155-5435.
  5. Chen, Taipu; Chen, Lei; Zhao, Yutong; Hao, Jinkai; Shao, Zhigang (July 2024). "Organic phosphonic acid modified SBA-15 assisted enhanced high-temperature proton exchange membrane fuel cell performance of polybenzimidazole membranes". Journal of Membrane Science. 707: 122948. doi:10.1016/j.memsci.2024.122948.
  6. Cao, Liang; Man, Tiffany; Kruk, Michal (2009-03-24). "Synthesis of Ultra-Large-Pore SBA-15 Silica with Two-Dimensional Hexagonal Structure Using Triisopropylbenzene As Micelle Expander". Chemistry of Materials. 21 (6): 1144–1153. doi:10.1021/cm8012733. ISSN 0897-4756.
  7. Belet, Artium; Léonard, Alexandre; Heinrichs, Benoit (2024-05-13). "Small-angle scattering and sorption data in SBA-15 materials". dataverse. doi:10.58119/ULG/L8PJJK. Retrieved 2024-05-13.
  8. Thommes, Matthias; Kaneko, Katsumi; Neimark, Alexander V.; Olivier, James P.; Rodriguez-Reinoso, Francisco; Rouquerol, Jean; Sing, Kenneth S.W. (2015-10-01). "Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)". Pure and Applied Chemistry. 87 (9–10): 1051–1069. doi:10.1515/pac-2014-1117. ISSN 1365-3075.
  9. Chaudhary, Vasu; Sharma, Sweta (June 2017). "An overview of ordered mesoporous material SBA-15: synthesis, functionalization and application in oxidation reactions". Journal of Porous Materials. 24 (3): 741–749. doi:10.1007/s10934-016-0311-z. ISSN 1380-2224.
  10. ^ Haidar, Ali F.; Léonard, Alexandre; Gommes, Cedric J. (2024-05-13). "Small-angle scattering and sorption data in mesoporous materials". dataverse. doi:10.58119/ULG/S0HYHL. Retrieved 2024-05-13.
Categories: