Misplaced Pages

Snake Projection

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Map projection for linear projects
Geodesy
Fundamentals
Concepts
Technologies
Standards (history)
NGVD 29 Sea Level Datum 1929
OSGB36 Ordnance Survey Great Britain 1936
SK-42 Systema Koordinat 1942 goda
ED50 European Datum 1950
SAD69 South American Datum 1969
GRS 80 Geodetic Reference System 1980
ISO 6709 Geographic point coord. 1983
NAD 83 North American Datum 1983
WGS 84 World Geodetic System 1984
NAVD 88 N. American Vertical Datum 1988
ETRS89 European Terrestrial Ref. Sys. 1989
GCJ-02 Chinese obfuscated datum 2002
Geo URI Internet link to a point 2010

The Snake Projection is a continuous map projection typically used as the planar coordinate system for realizing low distortion throughout long linear engineering projects.

Details

Generating a trend line of zero distortion that follows the route of a long and linear project

The Snake Projection was originally developed by University College London and Network Rail to provide a continuous low distortion projection for the West Coast Mainline infrastructure works. The parameters defining each Snake Projection are tailored for the specific project; the most typical use is with large-scale linear engineering projects such as rail infrastructure, however the projection is equally applicable to any application requiring a low distortion grid along a linear route (for example pipelines and roads). The name of the projection is derived from the sinuous snake-like nature of the projects it may be designed for. Typical map projection distance distortion characteristics of a Snake Projection are minimal over the whole route within approximately 20 kilometres of the centre line.

The principal advantage of the projection is that, for the corridor defining the design space, distances measured on the ground have a nearly one to one relationship with distances in coordinate space (i.e. no scale factor need be applied to convert between distances in grid and distances on the ground). The length of the applicable corridor is variable on a project basis, however when required the projection can extend over several hundreds of kilometres to achieve grid distortion of less than 20 parts per million along the route. The main disadvantage is that away from the design corridor the distortion of the projection is not controlled.

The Snake Projection is suited for engineering purposes due to its low distortion characteristics. An example of its differentiation from mapping grids is the 60m increase in length of the London to Birmingham section of the HS2 rail line, purely due to the more accurate grid representation compared to the length when using the national mapping coordinate system British National Grid.

Usage

The Snake Projection is the engineering coordinate system used for a significant proportion of primary rail routes in the UK, including that of the HS2 London to Birmingham high speed line. For the London to Glasgow West Coast Main Line the distortion in the Snake Projection used is no greater than 20 parts per million within 5 kilometres of either side of the track.

Implementation

The Snake Projection algorithm converts between geographical and grid coordinates, however the method of technical implementation can vary. One method of implementing a Snake Projection is to define using an NTv2 geodetic transformation coupled with a standard parameterised map projection (such as Transverse Mercator); this is increasing in popularity due to better compatibility with CAD and GIS software. The global EPSG geodetic coordinate system database features several snake projection definitions through the NTv2 approach. Other implementations include those published through the SnakeGrid organisation.

See also

References

  1. Iliffe, J. C.; Arthur, J. V.; Preston, C. (2007). "The Snake Projection: A Customised Grid for Rail Projects". Survey Review. 39 (304): 90–99. doi:10.1179/003962607X165041. S2CID 128833605.
  2. Gibbons, Chris (2023). "Working with SnakeGrid". CICES. Archived from the original on 22 April 2023. Retrieved 24 February 2023.
  3. Reynolds, John (2011). An Introduction to Applied and Environmental Geophysics (2 ed.). John Wiley & Sons. ISBN 978-0-471-48535-3. Archived from the original on 2018-02-07. Retrieved 2018-02-06.
  4. Iliffe, J. C. (2017). "The development and analysis of quasi-linear map projections". Cartography and Geographic Information Science. 45 (3): 270–283. doi:10.1080/15230406.2017.1325332. S2CID 67328277. Archived from the original on 2023-04-22. Retrieved 2018-11-26.
  5. SCSI (26 November 2020). "Map Projections and Scale Factor" (PDF). SCSI. Society of Chartered Surveyors Ireland. Archived (PDF) from the original on 22 April 2023. Retrieved 24 February 2023.
  6. "Use of Global Navigation Satellite Systems (GNSS) in land surveying and mapping, 3rd edition" (PDF). Royal Institution of Chartered Surveyors. 16 May 2023. p. 34. Retrieved 5 June 2023.
  7. ^ James Turner; Chris Preston; Richard Winthrop; Ian Thatcher; Peter Swales; Jamie Finney (30 November 2020). "Advances in Engineering Survey Grid Transformations for Rail Infrastructure". HS2 Learning Legacy. Archived from the original on 29 June 2022. Retrieved 24 May 2023.
  8. XYHT (2015-01-15). "Corridor Projections Solved". XYHT. Flatdog Media. Archived from the original on 2018-02-05. Retrieved 5 February 2018.
  9. UCL. "HS2 becomes fifth project this year to adopt SnakeGrid system". CEGE. UCL. Retrieved 5 February 2018.
  10. Uren, John; Price, Bill (2010). Surveying for Engineers (5 ed.). Basingstoke: Palgrave Macmillan. Archived from the original on 2018-02-07. Retrieved 2018-02-06.
  11. "EPSG Geodetic Parameter Dataset". EPSG. Archived from the original on 24 February 2023. Retrieved 24 February 2023.
  12. "FREQUENTLY ASKED QUESTIONS". Snakegrid.org. Archived from the original on 24 February 2023. Retrieved 24 February 2023.
Categories: