Misplaced Pages

Snoqualmie Tunnel

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Tunnel in Washington, United States
Snoqualmie Tunnel
East portal at Hyak in 2006
Overview
LocationHyak, Washington
Coordinates47°23′41″N 121°23′47″W / 47.3947°N 121.3963°W / 47.3947; -121.3963
CrossesCascade Range,
near Snoqualmie Pass
Operation
Work begun1912
Opened1914, 110 years ago
OperatorMilwaukee Road
CharacterRail until 1980,
now non-motorized trail
Technical
Length2.2526 miles (3.625 km)
No. of tracksSingle
Track gaugeStandard
ElectrifiedYes
Highest elevation2,600 feet (790 m)
Route map

The Snoqualmie Tunnel is a former railroad tunnel near Snoqualmie Pass in the U.S. state of Washington, located east of Seattle. The tunnel crosses the Cascade Range about three miles (5 km) south of the pass, which is used by Interstate 90, on the border between King County and Kittitas County. It is 11,894 feet (2.253 mi; 3.625 km) long and is at an approximate elevation of 2,600 feet (790 m) above sea level, just north of Keechelus Lake. Its east portal is at Hyak.

The tunnel was originally constructed for the Chicago, Milwaukee, St. Paul and Pacific Railroad in the early 1910s and was abandoned in 1980. It now serves as part of a rail trail in Iron Horse State Park, known officially as the Palouse to Cascades State Park Trail. The trail was formerly known as the John Wayne Pioneer Trail and commonly called the Iron Horse Trail. A major renovation to the walls, ceiling, and path were completed in July 2011 after a two-year closure.

History

The tunnel was constructed from 1912 to 1914 by the Chicago, Milwaukee, St. Paul and Pacific Railroad ("The Milwaukee Road") as part of its line from Chicago to Seattle, completed in 1909. It replaced a temporary surface line over Snoqualmie Pass at 3,020 feet (920 m); this grade from Hyak to Rockdale later became U.S. Route 10, now the eastbound lanes of I-90. The tunnel is aligned east–west and electrification in 1917 eliminated smoke dissipation issues.

In 1980, the Milwaukee Road received approval from the Interstate Commerce Commission to abandon its lines west of eastern Montana. On March 15, 1980, the final Milwaukee Road train passed through the tunnel. Later, the State of Washington acquired the right-of-way for recreational use.

Today the tunnel is part of the Iron Horse State Park rails-to-trails project. It is usually closed between November 1 through early May due to ice formations inside the tunnel. On July 5, 2011, the tunnel re-opened after 11 months of renovations. The $700,000 renovation added a four-inch (10 cm) layer of concrete to the walls and ceiling, a reinforced structure, and a new and improved walking surface of crushed rock.

Gallery

  • About 200 yards from exiting the west side of the Snoqualmie Tunnel About 200 yards from exiting the west side of the Snoqualmie Tunnel
  • The west entrance to the Snoqualmie Tunnel The west entrance to the Snoqualmie Tunnel
  • Snoqualmie Tunnel 1912–1914. Snoqualmie Tunnel 1912–1914.
  • Inside the tunnel 2008. Inside the tunnel 2008.

See also

References

  1. Washington Geological Survey (1913). Bulletin - Washington Geological Survey, Issues 16-18. The Survey. p. 259. Retrieved 13 April 2017.
  2. Johnston, Greg (August 27, 2008). "Rolling on the old Milwaukee rail line". Seattle Post-Intelligencer. Retrieved January 9, 2017.
  3. Paul, Crystal (May 17, 2018). "Former John Wayne Pioneer Trail renamed Palouse to Cascades State Park Trail". The Seattle Times. Retrieved May 17, 2018.
  4. Dolstad, Mackenzie. "Grand Re-opening of Snoqualmie Pass Tunnel". Mountains to Sound Greenway. Retrieved 8 June 2011.
  5. ^ Mapes, Lynda V. (July 6, 2011). "Snoqualmie Tunnel gives cyclists, riders cool new link". Seattle Times. Retrieved January 8, 2017.

External links

Categories: