Misplaced Pages

South African Class 7E2, Series 2

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Class of 40 South African electric locomotives

South African Class 7E2, Series 2
E7215 at Pyramid South, Pretoria in October 2009
Type and origin
Power typeElectric
Designer50 /s Group
BuilderUnion Carriage & Wagon
Model50 /s Group 7E2
Build date1983
Total produced40
Specifications
Gauge1,067 mm (3 ft 6 in)
BogiesCo-Co
Wheel diameter1.22 metres (4 ft 0 in)
Wheelbase13.46 metres (44.2 ft) ​
 • Bogie4.06 metres (13.3 ft)
Pivot centres10.20 metres (33.5 ft)
Panto shoes10.20 metres (33.5 ft)
Length:
 • Over couplers18.47 metres (60.6 ft)
 • Over body17.50 metres (57.4 ft)
Width2.90 metres (9 ft 6 in)
Height:
 • Pantograph4.19 metres (13.7 ft)
 • Body height3.94 metres (12.9 ft)
Axle load21 tonnes (21 long tons; 23 short tons)
Adhesive weight124 tonnes (122 long tons; 137 short tons)
Loco weight124 tonnes (122 long tons; 137 short tons)
Electric system/s25 kV AC 50 Hz catenary
Current pickup(s)Pantographs
Traction motorsSix MG-680 ​
 • Rating 1 hour515 kW (691 hp)
 • Continuous500 kW (670 hp)
Gear ratio20/117
Loco brakeAir & Rheostatic
Train brakesAir & Vacuum
CouplersAAR knuckle
Performance figures
Maximum speed88 km/h (55 mph)
Power output:
 • 1 hour3,090 kW (4,140 hp)
 • Continuous3,000 kW (4,000 hp)
Tractive effort:
 • Starting450 kN (100,000 lbf)
 • 1 hour319 kN (72,000 lbf)
 • Continuous300 kN (67,000 lbf)
Career
OperatorsSouth African Railways
Spoornet
Transnet Freight Rail
PRASA
ClassClass 7E2
Number in class40
NumbersE7176-E7215
Delivered1983
First run1983

The South African Railways Class 7E2, Series 2 is an electric locomotive. South African Railways placed 40 Class 7E2, Series 2 electric locomotives with a Co-Co wheel arrangement in service in 1983.

Manufacturer

E7202 in Spoornet orange livery at Pyramid South in October 2009

The 25 kV AC Class 7E electric locomotive was designed for the South African Railways (SAR) by the 50 /s Group, consisting of ACEC of Belgium, AEG-Telefunken and Siemens of Germany, Alsthom-Atlantique and Société MTE of France, and Brown, Boveri & Cie of Switzerland. The locomotives were built by Union Carriage & Wagon (UCW) in Nigel, Transvaal, which was the sub-contractor for mechanical components and assembly and delivered in 1983, numbered E7176 to E7215. UCW did not allocate builder's numbers to the locomotives it built for the SAR, but used the SAR unit numbers for their record keeping.

Orientation

These dual cab locomotives have a roof access ladder on one side only, just to the right of the cab access door. The roof access ladder end is marked as the no. 2 end.

In visual appearance, the Series 2 locomotives can be distinguished from the Series 1 by the vertical grilles just to the rear of the driver's window on both sides on the Series 2 locomotives, but absent on Series 1. Both series have a large grille to the right of centre on the side opposite the roof access ladder side, near roof level on Series 1 locomotives and low down near sill level on Series 2. The three grilles in line just to the rear of the side doors on Series 1 units were replaced with a single long grille on Series 2 units. Like the Class 7E, some of the Class 7E2, Series 2 locomotives have distinctive "eyebrow" rainwater beadings above their cab windscreens, but these were added post-delivery and were not installed on all the units.

Characteristics

To reduce flange and rail wear, the bogies of both series of the Class 7E2 have a shorter wheelbase than the Class 7E, 4.06 metres (13 feet 3.8 inches) instead of 4.40 metres (14 feet 5.2 inches).

As on the Class 7E, the locomotive's pantograph contact shoe centres are directly above the bogie pivot centres. The reason is to reduce the possibility of pantograph hookups on catenary in sharp curves, such as in turnouts, as a result of sideways movement of the pantograph in relation to the overhead wire.

Service

The Class 7E2, Series 2 was placed in service on the northern 25 kV AC routes which stretch from Pyramid South north of Pretoria via Warmbad to Pietersburg and via Brits and Rustenburg to Thabazimbi. Most of them still serve here.

Liveries

All the Class 7E2, Series 2 locomotives were delivered in the SAR red oxide livery with signal red buffer beams and cowcatchers, yellow whiskers and with the number plates on the sides mounted on three-stripe yellow wings. In the 1990s some of them were repainted in the Spoornet orange livery with a yellow and blue chevron pattern on the buffer beams and cowcatchers. Some later received the Spoornet maroon livery. In the late 1990s most were repainted in the Spoornet blue livery with outline numbers on the long hood sides. After 2008 in the Transnet Freight Rail (TFR) and Passenger Rail Agency of South Africa (PRASA) era, some were repainted in the TFR red, green and yellow livery and at least one was repainted in the Shosholoza Meyl purple livery.

References

  1. ^ Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. pp. 129–131. ISBN 0869772112.
  2. "UCW - Electric locomotives" (PDF). The UCW Partnership. Archived from the original (PDF) on 12 October 2007. Retrieved 30 September 2010.
  3. Transnet Locomotives International issue 108 June 2017 page 22
  4. ^ South African Railways Index and Diagrams Electric and Diesel Locomotives, 610mm and 1065mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
  5. Middleton, John N. (2002). Railways of Southern Africa Locomotive Guide - 2002 (as amended by Combined Amendment List 4, January 2009) (2nd, Dec 2002 ed.). Herts, England: Beyer-Garratt Publications. pp. 50–51, 61xx–yy.
  6. Soul of A Railway, System 7, Western Transvaal, based in Johannesburg, Part 9. South-Eastwards as far as Volksrust (2nd part) by Les Pivnic. Caption 4. (Accessed on 11 April 2017)

External links

South Africa Locomotives of South Africa
Steam
7' ¼" gauge
Standard gauge
Cape gauge
Tank engines
Cape gauge
Tender engines
Cape gauge
Articulated
engines
2' 6" gauge
2' & 600mm
gauges
Electric
Gas-electric
Diesel
Cape gauge
Diesel–electric
2' gauge
Diesel–electric
Cape gauge
Diesel–hydraulic
Cape gauge
Electro-diesel
Categories: