Misplaced Pages

Strontium peroxide

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Strontium peroxide
Identifiers
CAS Number
3D model (JSmol)
ECHA InfoCard 100.013.841 Edit this at Wikidata
EC Number
  • 215-224-6
PubChem CID
UNII
CompTox Dashboard (EPA)
InChI
  • InChI=1S/O2.Sr/c1-2;/q-2;+2
SMILES
  • .
Properties
Chemical formula SrO2
Molar mass 119.619 g/mol
Appearance white powder
Odor odorless
Density 4.56 g/cm (anhydrous) 1.91 g/cm (octahydrate)
Melting point 215 °C (419 °F; 488 K) (decomposes)
Solubility in water slightly soluble
Solubility very soluble in alcohol, ammonium chloride
insoluble in acetone
Structure
Crystal structure Tetragonal
Space group D4h, I4/mmm, tI6
Coordination geometry 6
Hazards
GHS labelling:
Pictograms GHS03: OxidizingGHS05: CorrosiveGHS07: Exclamation mark
Signal word Danger
Hazard statements H302, H312, H317, H331, H350
Precautionary statements P220, P261, P280, P305+P351+P338
Safety data sheet (SDS) External SDS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C , 100 kPa). ☒N verify (what is  ?) Infobox references
Chemical compound

Strontium peroxide is an inorganic compound with the formula Sr O2 that exists in both anhydrous and octahydrate form, both of which are white solids. The anhydrous form adopts a structure similar to that of calcium carbide.

Uses

It is an oxidizing agent used for bleaching. It is used in some pyrotechnic compositions as an oxidizer and a vivid red pyrotechnic colorant. It can also be used as an antiseptic and in tracer munitions.

Production

Strontium peroxide is produced by passing oxygen over heated strontium oxide. Upon heating in the absence of O2, it degrades to SrO and O2. It is more thermally labile than BaO2.

References

  1. Middleburgh, Simon C.; Lagerlof, Karl Peter D.; Grimes, Robin W. (2013). "Accommodation of Excess Oxygen in Group II Monoxides". Journal of the American Ceramic Society. 96: 308–311. doi:10.1111/j.1551-2916.2012.05452.x.
  2. Massalimov, I. A.; Kireeva, M. S.; Sangalov, Yu. A. (2002). "Structure and Properties of Mechanically Activated Barium Peroxide". Inorganic Materials. 38 (4): 363–366. doi:10.1023/A:1015105922260. S2CID 91881752.
  3. "Strontium Peroxide". American Elements. Retrieved March 7, 2019.
  4. Bernal, J. D.; D'yatlova, E.; Kasarnovskii, I.; Raikhstein, S. I.; Ward, A. G. "The structure of strontium and barium peroxides" Zeitschrift für Kristallographie, Kristallgeometrie, Kristallphysik, Kristallchemie (1935), 92, 344-54.
  5. Natta, G. "Structure of hydroxides and hydrates. IV. Octahydrated strontium peroxide" Gazzetta Chimica Italiana (1932), 62, 444-56.
  6. Middleburgh, Simon C.; Lagerlof, Karl Peter D.; Grimes, Robin W. (2013). "Accommodation of Excess Oxygen in Group II Monoxides". Journal of the American Ceramic Society. 96: 308–311. doi:10.1111/j.1551-2916.2012.05452.x.
  7. Bauschlicher, Charles W. Jr.; Partridge, Harry; Sodupe, Mariona; Langhoff, Stephen R. "Theoretical study of the alkaline-earth metal superoxides BeO2 through SrO2" Journal of Physical Chemistry 1992, volume 96, pp. 9259-64. doi:10.1021/j100202a036

See also

Strontium compounds
Categories: