Misplaced Pages

Part of a series on
Spacetime
Special relativity General relativity
Spacetime concepts Spacetime manifold Equivalence principle Lorentz transformations Minkowski space
General relativity Introduction to general relativity Mathematics of general relativity Einstein field equations
Classical gravity Introduction to gravitation Newton's law of universal gravitation
Relevant mathematics Four-vector Derivations of relativity Spacetime diagrams Differential geometry Curved space Curved spacetime Mathematics of general relativity Spacetime topology
Physics portal  Category
v t e

In theoretical physics, the composition of two non-collinear Lorentz boosts results in a Lorentz transformation that is not a pure boost but is the composition of a boost and a rotation. This rotation is called Thomas rotation, Thomas–Wigner rotation or Wigner rotation. If a sequence of non-collinear boosts returns an object to its initial velocity, then the sequence of Wigner rotations can combine to produce a net rotation called the Thomas precession.

The rotation was discovered by Émile Borel in 1913, rediscovered and proved by Ludwik Silberstein in his 1914 book 'Relativity', rediscovered by Llewellyn Thomas in 1926, and rederived by Wigner in 1939. Wigner acknowledged Silberstein.

There are still ongoing discussions about the correct form of equations for the Thomas rotation in different reference systems with contradicting results. Goldstein:

The spatial rotation resulting from the successive application of two non-collinear Lorentz transformations have been declared every bit as paradoxical as the more frequently discussed apparent violations of common sense, such as the twin paradox.

Einstein's principle of velocity reciprocity (EPVR) reads

We postulate that the relation between the coordinates of the two systems is linear. Then the inverse transformation is also linear and the complete non-preference of the one or the other system demands that the transformation shall be identical with the original one, except for a change of v to −v

With less careful interpretation, the EPVR is seemingly violated in some situations, but on closer analysis there is no such violation.

Let it be u the velocity in which the lab reference frame moves respect an object called A and let it be v the velocity in which another object called B is moving, measured from the lab reference frame. If u and v are not aligned, the coordinates of the relative velocities of these two bodies will not be opposite even though the actual velocity vectors themselves are indeed opposites (with the fact that the coordinates are not opposites being due to the fact that the two travellers are not using the same coordinate basis vectors).

If A and B both started in the lab system with coordinates matching those of the lab and subsequently use coordinate systems that result from their respective boosts from that system, then the velocity that A will measure on B will be given in terms of A's new coordinate system by:

${\displaystyle \mathbf {v} _{AB}={\frac {1}{1+{\frac {\mathbf {u} \cdot \mathbf {v} }{c^{2}}}}}\left,}$

And the velocity that B will measure on A will be given in terms of B's coordinate system by:

${\displaystyle \mathbf {v} _{BA}={\frac {1}{1+{\frac {\mathbf {v} \cdot \mathbf {u} }{c^{2}}}}}\left,}$

The Lorentz factor for the velocities that either A sees on B or B sees on A are the same:

${\displaystyle \gamma =\gamma _{\mathbf {u} \oplus \mathbf {v} }=\gamma _{\mathbf {v} \oplus \mathbf {u} }=\gamma _{\mathbf {u} }\gamma _{\mathbf {v} }\left(1+{\frac {\mathbf {u} \cdot \mathbf {v} }{c^{2}}}\right)\,,}$

but the components are not opposites - i.e. ${\textstyle \mathbf {v} _{AB}\neq -\mathbf {v} _{BA}}$

However this does not mean that the velocities are not opposites as the components in each case are multiplied by different basis vectors (and all observers agree that the difference is by a rotation of coordinates such that the actual velocity vectors are indeed exact opposites).

The angle of rotation can be calculated in two ways:

${\displaystyle \cos \epsilon ={\frac {(1+\gamma +\gamma _{\mathbf {u} }+\gamma _{\mathbf {v} })^{2}}{(1+\gamma )(1+\gamma _{\mathbf {u} })(1+\gamma _{\mathbf {v} })}}-1~,}$

Or:

${\displaystyle \cos \epsilon =-{\frac {(\mathbf {v} _{AB}\cdot \mathbf {v} _{BA})}{(v_{AB}^{2})}}}$

And the axis of rotation is:

${\displaystyle \mathbf {e} =-{\frac {\mathbf {u} \times \mathbf {v} }{|\mathbf {u} \times \mathbf {v} |}}~.}$

Setup of frames and relative velocities between them

Two general boosts

When studying the Thomas rotation at the fundamental level, one typically uses a setup with three coordinate frames, Σ, Σ′ Σ′′. Frame Σ′ has velocity u relative to frame Σ, and frame Σ′′ has velocity v relative to frame Σ′.

The axes are, by construction, oriented as follows. Viewed from Σ′, the axes of Σ′ and Σ are parallel (the same holds true for the pair of frames when viewed from Σ.) Also viewed from Σ′, the spatial axes of Σ′ and Σ′′ are parallel (and the same holds true for the pair of frames when viewed from Σ′′.) This is an application of EVPR: If u is the velocity of Σ′ relative to Σ, then u′ = −u is the velocity of Σ relative to Σ′. The velocity 3-vector u makes the same angles with respect to coordinate axes in both the primed and unprimed systems. This does not represent a snapshot taken in any of the two frames of the combined system at any particular time, as should be clear from the detailed description below.

This is possible, since a boost in, say, the positive z-direction, preserves orthogonality of the coordinate axes. A general boost B(w) can be expressed as L = R(e_z, w)B_z(w)R(e_z, w), where R(e_z, w) is a rotation taking the z-axis into the direction of w and B_z is a boost in the new z-direction. Each rotation retains the property that the spatial coordinate axes are orthogonal. The boost will stretch the (intermediate) z-axis by a factor γ, while leaving the intermediate x-axis and y-axis in place. The fact that coordinate axes are non-parallel in this construction after two consecutive non-collinear boosts is a precise expression of the phenomenon of Thomas rotation.

The velocity of Σ′′ as seen in Σ is denoted w_d = u ⊕ v, where ⊕ refers to the relativistic addition of velocity (and not ordinary vector addition), given by

${\displaystyle \mathbf {u} \oplus \mathbf {v} ={\frac {1}{1+{\frac {\mathbf {u} \cdot \mathbf {v} }{c^{2}}}}}\left,}$

(VA 2)

and

${\displaystyle \gamma _{\mathbf {u} }={\frac {1}{\sqrt {1-{\frac {|\mathbf {u} |^{2}}{c^{2}}}}}}}$

is the Lorentz factor of the velocity u (the vertical bars |u| indicate the magnitude of the vector). The velocity u can be thought of the velocity of a frame Σ′ relative to a frame Σ, and v is the velocity of an object, say a particle or another frame Σ′′ relative to Σ′. In the present context, all velocities are best thought of as relative velocities of frames unless otherwise specified. The result w = u ⊕ v is then the relative velocity of frame Σ′′ relative to a frame Σ.

Although velocity addition is nonlinear, non-associative, and non-commutative, the result of the operation correctly obtains a velocity with a magnitude less than c. If ordinary vector addition was used, it would be possible to obtain a velocity with a magnitude larger than c. The Lorentz factor γ of both composite velocities are equal,

${\displaystyle \gamma =\gamma _{\mathbf {u} \oplus \mathbf {v} }=\gamma _{\mathbf {v} \oplus \mathbf {u} }=\gamma _{\mathbf {u} }\gamma _{\mathbf {v} }\left(1+{\frac {\mathbf {u} \cdot \mathbf {v} }{c^{2}}}\right)\,,}$

and the norms are equal under interchange of velocity vectors

${\displaystyle |\mathbf {u} \oplus \mathbf {v} |=|\mathbf {v} \oplus \mathbf {u} |={\frac {c}{\gamma }}{\sqrt {\gamma ^{2}-1}}\,.}$

Since the two possible composite velocities have equal magnitude, but different directions, one must be a rotated copy of the other. More detail and other properties of no direct concern here can be found in the main article.

Reversed configuration

Consider the reversed configuration, namely, frame Σ moves with velocity −u relative to frame Σ′, and frame Σ′, in turn, moves with velocity −v relative to frame Σ′′. In short, u → − u and v → −v by EPVR. Then the velocity of Σ relative to Σ′′ is (−v) ⊕ (−u) ≡ −v ⊕ u. By EPVR again, the velocity of Σ′′ relative to Σ is then w_i = v ⊕ u. (A)

One finds w_d ≠ w_i. While they are equal in magnitude, there is an angle between them. For a single boost between two inertial frames, there is only one unambiguous relative velocity (or its negative). For two boosts, the peculiar result of two inequivalent relative velocities instead of one seems to contradict the symmetry of relative motion between any two frames. Which is the correct velocity of Σ′′ relative to Σ? Since this inequality may be somewhat unexpected and potentially breaking EPVR, this question is warranted.

Formulation in terms of Lorentz transformations

Two boosts equals a boost and rotation

The answer to the question lies in the Thomas rotation, and that one must be careful in specifying which coordinate system is involved at each step. When viewed from Σ, the coordinate axes of Σ and Σ′′ are not parallel. While this can be hard to imagine since both pairs (Σ, Σ′) and (Σ′, Σ′′) have parallel coordinate axes, it is easy to explain mathematically.

Velocity addition does not provide a complete description of the relation between the frames. One must formulate the complete description in terms of Lorentz transformations corresponding to the velocities. A Lorentz boost with any velocity v (magnitude less than c) is given symbolically by

${\displaystyle X'=B(\mathbf {v} )X}$

where the coordinates and transformation matrix are compactly expressed in block matrix form

${\displaystyle X'={\begin{bmatrix}ct'\\\mathbf {r} '\end{bmatrix}}\quad B(\mathbf {v} )={\begin{bmatrix}\gamma _{\mathbf {v} }&-{\dfrac {\gamma _{\mathbf {v} }}{c}}\mathbf {v} ^{\mathrm {T} }\\-{\dfrac {\gamma _{\mathbf {v} }}{c}}\mathbf {v} &\mathbf {I} +{\dfrac {\gamma _{\mathbf {v} }^{2}}{\gamma _{\mathbf {v} }+1}}{\dfrac {\mathbf {vv} ^{\mathrm {T} }}{c^{2}}}\\\end{bmatrix}}\quad X={\begin{bmatrix}ct\\\mathbf {r} \end{bmatrix}}}$

and, in turn, r, r′, v are column vectors (the matrix transpose of these are row vectors), and γ_v is the Lorentz factor of velocity v. The boost matrix is a symmetric matrix. The inverse transformation is given by

${\displaystyle B(\mathbf {v} )^{-1}=B(-\mathbf {v} )\quad \Rightarrow \quad X=B(-\mathbf {v} )X'.}$

It is clear that to each admissible velocity v there corresponds a pure Lorentz boost,

${\displaystyle \mathbf {v} \leftrightarrow B(\mathbf {v} ).}$

Velocity addition u⊕v corresponds to the composition of boosts B(v)B(u) in that order. The B(u) acts on X first, then B(v) acts on B(u)X. Notice succeeding operators act on the left in any composition of operators, so B(v)B(u) should be interpreted as a boost with velocities u then v, not v then u. Performing the Lorentz transformations by block matrix multiplication,

${\displaystyle X''=B(\mathbf {v} )X'\,,\quad X'=B(\mathbf {u} )X\quad \Rightarrow \quad X''=\Lambda X}$

the composite transformation matrix is

${\displaystyle \Lambda =B(\mathbf {v} )B(\mathbf {u} )={\begin{bmatrix}\gamma &-\mathbf {a} ^{\mathrm {T} }\\-\mathbf {b} &\mathbf {M} \end{bmatrix}}}$

and, in turn,

${\displaystyle {\begin{aligned}\gamma &=\gamma _{\mathbf {v} }\gamma _{\mathbf {u} }\left(1+{\frac {\mathbf {v} ^{\mathrm {T} }\mathbf {u} }{c^{2}}}\right)\\\mathbf {a} &={\frac {\gamma }{c}}\mathbf {u} \oplus \mathbf {v} \,,\quad \mathbf {b} ={\frac {\gamma }{c}}\mathbf {v} \oplus \mathbf {u} \\\mathbf {M} &=\gamma _{\mathbf {u} }\gamma _{\mathbf {v} }{\frac {\mathbf {vu} ^{\mathrm {T} }}{c^{2}}}+\left(\mathbf {I} +{\frac {\gamma _{\mathbf {v} }^{2}}{\gamma _{\mathbf {v} }+1}}{\frac {\mathbf {vv} ^{\mathrm {T} }}{c^{2}}}\right)\left(\mathbf {I} +{\frac {\gamma _{\mathbf {u} }^{2}}{\gamma _{\mathbf {u} }+1}}{\frac {\mathbf {uu} ^{\mathrm {T} }}{c^{2}}}\right)\end{aligned}}}$

Here γ is the composite Lorentz factor, and a and b are 3×1 column vectors proportional to the composite velocities. The 3×3 matrix M will turn out to have geometric significance.

The inverse transformations are

${\displaystyle X=B(-\mathbf {u} )X'\,,\quad X'=B(-\mathbf {v} )X''\quad \Rightarrow \quad X=\Lambda ^{-1}X''}$

and the composition amounts to a negation and exchange of velocities,

${\displaystyle \Lambda ^{-1}=B(-\mathbf {u} )B(-\mathbf {v} )={\begin{bmatrix}\gamma &\mathbf {b} ^{\mathrm {T} }\\\mathbf {a} &\mathbf {M} ^{\mathrm {T} }\end{bmatrix}}}$

If the relative velocities are exchanged, looking at the blocks of Λ, one observes the composite transformation to be the matrix transpose of Λ. This is not the same as the original matrix, so the composite Lorentz transformation matrix is not symmetric, and thus not a single boost. This, in turn, translates to the incompleteness of velocity composition from the result of two boosts; symbolically,

${\displaystyle B(\mathbf {u} \oplus \mathbf {v} )\neq B(\mathbf {v} )B(\mathbf {u} )\,.}$

To make the description complete, it is necessary to introduce a rotation, before or after the boost. This rotation is the Thomas rotation. A rotation is given by

${\displaystyle X'=R({\boldsymbol {\theta }})X}$

where the 4×4 rotation matrix is

${\displaystyle R({\boldsymbol {\theta }})={\begin{bmatrix}1&0\\0&\mathbf {R} ({\boldsymbol {\theta }})\end{bmatrix}}}$

and R is a 3×3 rotation matrix. In this article the axis-angle representation is used, and θ = θe is the "axis-angle vector", the angle θ multiplied by a unit vector e parallel to the axis. Also, the right-handed convention for the spatial coordinates is used (see orientation (vector space)), so that rotations are positive in the anticlockwise sense according to the right-hand rule, and negative in the clockwise sense. With these conventions; the rotation matrix rotates any 3d vector about the axis e through angle θ anticlockwise (an active transformation), which has the equivalent effect of rotating the coordinate frame clockwise about the same axis through the same angle (a passive transformation).

The rotation matrix is an orthogonal matrix, its transpose equals its inverse, and negating either the angle or axis in the rotation matrix corresponds to a rotation in the opposite sense, so the inverse transformation is readily obtained by

${\displaystyle R({\boldsymbol {\theta }})^{-1}=R({\boldsymbol {\theta }})^{\mathrm {T} }=R(-{\boldsymbol {\theta }})\quad \Rightarrow \quad X=R(-{\boldsymbol {\theta }})X'\,.}$

A boost followed or preceded by a rotation is also a Lorentz transformation, since these operations leave the spacetime interval invariant. The same Lorentz transformation has two decompositions for appropriately chosen rapidity and axis-angle vectors;

${\displaystyle \Lambda ({\boldsymbol {\theta }},\mathbf {u} )=R({\boldsymbol {\theta }})B(\mathbf {u} )}$

${\displaystyle \Lambda (\mathbf {v} ,{\boldsymbol {\theta }})=B(\mathbf {v} )R({\boldsymbol {\theta }})}$

and if these are two decompositions are equal, the two boosts are related by

${\displaystyle B(\mathbf {u} )=R(-{\boldsymbol {\theta }})B(\mathbf {v} )R({\boldsymbol {\theta }})}$

so the boosts are related by a matrix similarity transformation.

It turns out the equality between two boosts and a rotation followed or preceded by a single boost is correct: the rotation of frames matches the angular separation of the composite velocities, and explains how one composite velocity applies to one frame, while the other applies to the rotated frame. The rotation also breaks the symmetry in the overall Lorentz transformation making it nonsymmetric. For this specific rotation, let the angle be ε and the axis be defined by the unit vector e, so the axis-angle vector is ε = εe.

Altogether, two different orderings of two boosts means there are two inequivalent transformations. Each of these can be split into a boost then rotation, or a rotation then boost, doubling the number of inequivalent transformations to four. The inverse transformations are equally important; they provide information about what the other observer perceives. In all, there are eight transformations to consider, just for the problem of two Lorentz boosts. In summary, with subsequent operations acting on the left, they are

Two boosts...	...split into a boost then rotation...	...or split into a rotation then boost.
${\displaystyle \Lambda =B(\mathbf {v} )B(\mathbf {u} )={\begin{bmatrix}\gamma &-\mathbf {a} ^{\mathrm {T} }\\-\mathbf {b} &\mathbf {M} \end{bmatrix}}}$	${\displaystyle \Lambda =R({\boldsymbol {\epsilon }})B(c\mathbf {a} /\gamma )}$	${\displaystyle \Lambda =B(c\mathbf {b} /\gamma )R({\boldsymbol {\epsilon }})}$
${\displaystyle \Lambda ^{-1}=B(-\mathbf {u} )B(-\mathbf {v} )={\begin{bmatrix}\gamma &\mathbf {b} ^{\mathrm {T} }\\\mathbf {a} &\mathbf {M} ^{\mathrm {T} }\end{bmatrix}}}$	${\displaystyle \Lambda ^{-1}=B(-c\mathbf {a} /\gamma )R(-{\boldsymbol {\epsilon }})}$	${\displaystyle \Lambda ^{-1}=R(-{\boldsymbol {\epsilon }})B(-c\mathbf {b} /\gamma )}$
${\displaystyle \Lambda ^{\mathrm {T} }=B(\mathbf {u} )B(\mathbf {v} )={\begin{bmatrix}\gamma &-\mathbf {b} ^{\mathrm {T} }\\-\mathbf {a} &\mathbf {M} ^{\mathrm {T} }\end{bmatrix}}}$	${\displaystyle \Lambda ^{\mathrm {T} }=B(c\mathbf {a} /\gamma )R(-{\boldsymbol {\epsilon }})}$	${\displaystyle \Lambda ^{\mathrm {T} }=R(-{\boldsymbol {\epsilon }})B(c\mathbf {b} /\gamma )}$
${\displaystyle \left(\Lambda ^{\mathrm {T} }\right)^{-1}=B(-\mathbf {v} )B(-\mathbf {u} )={\begin{bmatrix}\gamma &\mathbf {a} ^{\mathrm {T} }\\\mathbf {b} &\mathbf {M} \end{bmatrix}}}$	${\displaystyle \left(\Lambda ^{\mathrm {T} }\right)^{-1}=R({\boldsymbol {\epsilon }})B(-c\mathbf {a} /\gamma )}$	${\displaystyle \left(\Lambda ^{\mathrm {T} }\right)^{-1}=B(-c\mathbf {b} /\gamma )R({\boldsymbol {\epsilon }})}$

Matching up the boosts followed by rotations, in the original setup, an observer in Σ notices Σ′′ to move with velocity u⊕v then rotate clockwise (first diagram), and because of the rotation an observer in Σ′′ notices Σ to move with velocity −v⊕u then rotate anticlockwise (second diagram). If the velocities are exchanged an observer in Σ notices Σ′′ to move with velocity v⊕u then rotate anticlockwise (third diagram), and because of the rotation an observer in Σ′′ notices Σ to move with velocity −u⊕v then rotate clockwise (fourth diagram).

The cases of rotations then boosts are similar (no diagrams are shown). Matching up the rotations followed by boosts, in the original setup, an observer in Σ notices Σ′′ to rotate clockwise then move with velocity v⊕u, and because of the rotation an observer in Σ′′ notices Σ to rotate anticlockwise then move with velocity −u⊕v. If the velocities are exchanged an observer in Σ notices Σ′′ to rotate anticlockwise then move with velocity u⊕v, and because of the rotation an observer in Σ′′ notices Σ to rotate clockwise then move with velocity −u⊕v.

Finding the axis and angle of the Thomas rotation

The above formulae constitute the relativistic velocity addition and the Thomas rotation explicitly in the general Lorentz transformations. Throughout, in every composition of boosts and decomposition into a boost and rotation, the important formula

${\displaystyle \mathbf {M} =\mathbf {R} +{\frac {1}{\gamma +1}}\mathbf {ba} ^{\mathrm {T} }}$

holds, allowing the rotation matrix to be defined completely in terms of the relative velocities u and v. The angle of a rotation matrix in the axis–angle representation can be found from the trace of the rotation matrix, the general result for any axis is tr(R) = 1 + 2 cos ε. Taking the trace of the equation gives

${\displaystyle \cos \epsilon ={\frac {(1+\gamma +\gamma _{\mathbf {u} }+\gamma _{\mathbf {v} })^{2}}{(1+\gamma )(1+\gamma _{\mathbf {u} })(1+\gamma _{\mathbf {v} })}}-1}$

The angle ε between a and b is not the same as the angle α between u and v.

In both frames Σ and Σ′′, for every composition and decomposition, another important formula

${\displaystyle \mathbf {b} =\mathbf {Ra} }$

holds. The vectors a and b are indeed related by a rotation, in fact by the same rotation matrix R which rotates the coordinate frames. Starting from a, the matrix R rotates this into b anticlockwise, it follows their cross product (in the right-hand convention)

${\displaystyle \mathbf {a} \times \mathbf {b} ={\frac {\gamma _{\mathbf {u} }\gamma _{\mathbf {v} }\left(\gamma ^{2}-1\right)(\gamma +\gamma _{\mathbf {v} }+\gamma _{\mathbf {u} }+1)}{c^{2}(\gamma _{\mathbf {v} }+1)(\gamma _{\mathbf {u} }+1)(\gamma +1)}}\mathbf {u} \times \mathbf {v} }$

defines the axis correctly, therefore the axis is also parallel to u×v. The magnitude of this pseudovector is neither interesting nor important, only the direction is, so it can be normalized into the unit vector

${\displaystyle \mathbf {e} ={\frac {\mathbf {u} \times \mathbf {v} }{|\mathbf {u} \times \mathbf {v} |}}}$

which still completely defines the direction of the axis without loss of information.

The rotation is simply a "static" rotation and there is no relative rotational motion between the frames, there is relative translational motion in the boost. However, if the frames accelerate, then the rotated frame rotates with an angular velocity. This effect is known as the Thomas precession, and arises purely from the kinematics of successive Lorentz boosts.

Finding the Thomas rotation

The decomposition process described (below) can be carried through on the product of two pure Lorentz transformations to obtain explicitly the rotation of the coordinate axes resulting from the two successive "boosts". In general, the algebra involved is quite forbidding, more than enough, usually, to discourage any actual demonstration of the rotation matrix

— Goldstein (1980, p. 286)

In principle, it is pretty easy. Since every Lorentz transformation is a product of a boost and a rotation, the consecutive application of two pure boosts is a pure boost, either followed by or preceded by a pure rotation. Thus, suppose

${\displaystyle \Lambda =B(\mathbf {w} )R.}$

The task is to glean from this equation the boost velocity w and the rotation R from the matrix entries of Λ. The coordinates of events are related by

${\displaystyle x'^{\mu }={\Lambda ^{\mu }}_{\nu }x^{\nu }.}$

Inverting this relation yields

${\displaystyle {\left(\Lambda ^{-1}\right)^{\nu }}_{\mu }{\Lambda ^{\mu }}_{\rho }x^{\rho }={\left(\Lambda ^{-1}\right)^{\nu }}_{\mu }x'^{\mu },}$

or

${\displaystyle x^{\nu }={\Lambda _{\mu }}^{\nu }x'^{\mu }.}$

Set x′ = (ct′, 0, 0, 0). Then x will record the spacetime position of the origin of the primed system,

${\displaystyle x^{\nu }={\Lambda _{0}}^{\nu }x'^{0},}$

or

${\displaystyle x={\begin{pmatrix}ct\\x_{1}\\x_{2}\\x_{3}\end{pmatrix}}={\begin{pmatrix}{\Lambda _{0}}^{0}ct'\\{\Lambda _{0}}^{1}ct'\\{\Lambda _{0}}^{2}ct'\\{\Lambda _{0}}^{3}ct'\end{pmatrix}}..}$

But

${\displaystyle \Lambda ^{-1}=(B(\mathbf {w} )R)^{-1}=R^{-1}B(-\mathbf {w} ).}$

Multiplying this matrix with a pure rotation will not affect the zeroth columns and rows, and

${\displaystyle x={\begin{pmatrix}ct\\x_{1}\\x_{2}\\x_{3}\end{pmatrix}}={\begin{pmatrix}\gamma ct'\\\gamma \beta _{x}ct'\\\gamma \beta _{y}ct'\\\gamma \beta _{z}ct'\end{pmatrix}}={\begin{pmatrix}\gamma ct'\\\gamma w_{x}t'\\\gamma w_{y}t'\\\gamma w_{z}t'\end{pmatrix}}=\gamma {\begin{pmatrix}ct'\\w_{x}t'\\w_{y}t'\\w_{z}t'\end{pmatrix}},}$

which could have been anticipated from the formula for a simple boost in the x-direction, and for the relative velocity vector

${\displaystyle {\frac {1}{ct}}\mathbf {x} ={\frac {\mathbf {w} }{c}}={\boldsymbol {\beta }}={\begin{pmatrix}{\frac {x_{1}}{ct}}\\{\frac {x_{2}}{ct}}\\{\frac {x_{3}}{ct}}\end{pmatrix}}={\begin{pmatrix}\beta _{x}\\\beta _{y}\\\beta _{z}\end{pmatrix}}={\begin{pmatrix}{\Lambda _{0}}^{1}/{\Lambda _{0}}^{0}\\{\Lambda _{0}}^{2}/{\Lambda _{0}}^{0}\\{\Lambda _{0}}^{3}/{\Lambda _{0}}^{0}\end{pmatrix}}.}$

Thus given with Λ, one obtains β and w by little more than inspection of Λ. (Of course, w can also be found using velocity addition per above.) From w, construct B(−w). The solution for R is then

${\displaystyle R=B(-\mathbf {w} )\Lambda .}$

With the ansatz

${\displaystyle \Lambda =RB(\mathbf {w} ),}$

one finds by the same means

${\displaystyle R=\Lambda B(-\mathbf {w} ).}$

Finding a formal solution in terms of velocity parameters u and v involves first formally multiplying B(v)B(u), formally inverting, then reading off β_w form the result, formally building B(−w) from the result, and, finally, formally multiplying B(−w)B(v)B(u). It should be clear that this is a daunting task, and it is difficult to interpret/identify the result as a rotation, though it is clear a priori that it is. It is these difficulties that the Goldstein quote at the top refers to. The problem has been thoroughly studied under simplifying assumptions over the years.

Group theoretical origin

Another way to explain the origin of the rotation is by looking at the generators of the Lorentz group.

Boosts from velocities

The passage from a velocity to a boost is obtained as follows. An arbitrary boost is given by

${\displaystyle e^{-{\boldsymbol {\zeta }}\cdot \mathbf {K} },}$

where ζ is a triple of real numbers serving as coordinates on the boost subspace of the Lie algebra so(3, 1) spanned by the matrices

${\displaystyle (K_{1},K_{2},K_{3})=\left(\left,\left,\left\right).}$

The vector

${\displaystyle {\boldsymbol {\zeta }}={\frac {\boldsymbol {\beta }}{\beta }}\tanh ^{-1}\beta }$

is called the boost parameter or boost vector, while its norm is the rapidity. Here β is the velocity parameter, the magnitude of the vector β = u/c.

While for ζ one has 0 ≤ ζ < ∞, the parameter β is confined within 0 ≤ β < 1, and hence 0 ≤ u < c. Thus

${\displaystyle e^{-\tanh ^{-1}(\beta ){\frac {\boldsymbol {\beta }}{\beta }}\cdot \mathbf {K} }=e^{-{\tanh ^{-1}\beta \over c\beta }\mathbf {u} \cdot \mathbf {K} }\equiv B(\mathbf {u} )~.}$

The set of velocities satisfying 0 ≤ u < c is an open ball in ℝ and is called the space of admissible velocities in the literature. It is endowed with a hyperbolic geometry described in the linked article.

Commutators

The generators of boosts, K₁, K₂, K₃, in different directions do not commute. This has the effect that two consecutive boosts is not a pure boost in general, but a rotation preceding a boost.

Consider a succession of boosts in the x direction, then the y direction, expanding each boost to first order

${\displaystyle e^{\zeta _{y}K_{y}}e^{\zeta _{x}K_{x}}=(I-\zeta _{y}K_{y}+\cdots )(I-\zeta _{x}K_{x}+\cdots )=I-\zeta _{x}K_{x}-\zeta _{y}K_{y}+\zeta _{x}\zeta _{y}K_{y}K_{x}+\cdots }$

then

${\displaystyle e^{-\zeta _{y}K_{y}}e^{-\zeta _{x}K_{x}}=I+\zeta _{x}K_{x}+\zeta _{y}K_{y}+\zeta _{x}\zeta _{y}K_{y}K_{x}+\cdots }$

and the group commutator is

${\displaystyle {\begin{aligned}e^{-\zeta _{y}K_{y}}e^{-\zeta _{x}K_{x}}e^{\zeta _{y}K_{y}}e^{\zeta _{x}K_{x}}=I&+\zeta _{x}\zeta _{y}-(\zeta _{x}K_{x})^{2}-(\zeta _{y}K_{y})^{2}\\&+\zeta _{x}^{2}\zeta _{y}K_{x}+\zeta _{x}\zeta _{y}^{2}K_{y}\\&+(\zeta _{x}\zeta _{y})^{2}K_{y}K_{x}K_{y}K_{x}+\cdots \end{aligned}}}$

Three of the commutation relations of the Lorentz generators are

${\displaystyle {\begin{aligned}&=J_{z}\\&=-J_{z}\\&=K_{z}\end{aligned}}}$

where the bracket = AB − BA is a binary operation known as the commutator, and the other relations can be found by taking cyclic permutations of x, y, z components (i.e. change x to y, y to z, and z to x, repeat).

Returning to the group commutator, the commutation relations of the boost generators imply for a boost along the x then y directions, there will be a rotation about the z axis. In terms of the rapidities, the rotation angle θ is given by

${\displaystyle \tan {\frac {\theta }{2}}=\tanh {\frac {\zeta _{x}}{2}}\tanh {\frac {\zeta _{y}}{2}},}$

equivalently expressible as

${\displaystyle \tan \theta ={\frac {\sinh {\zeta _{x}}~\sinh \zeta _{y}}{\cosh \zeta _{x}+\cosh \zeta _{y}}}~.}$

SO(2, 1) and Euler parametrization

In fact, the full Lorentz group is not indispensable for studying the Wigner rotation. Given that this phenomenon involves only two spatial dimensions, the subgroup SO(2, 1) is sufficient for analyzing the associated problems. Analogous to the Euler parametrization of SO(3), SO(2, 1) can be decomposed into three simple parts, providing a straightforward and intuitive framework for exploring the Wigner rotation problem.

Spacetime diagrams for non-collinear boosts

The familiar notion of vector addition for velocities in the Euclidean plane can be done in a triangular formation, or since vector addition is commutative, the vectors in both orderings geometrically form a parallelogram (see "parallelogram law"). This does not hold for relativistic velocity addition; instead a hyperbolic triangle arises whose edges are related to the rapidities of the boosts. Changing the order of the boost velocities, one does not find the resultant boost velocities to coincide.

See also

• Bargmann-Michel-Telegdi equation
• Pauli–Lubanski pseudovector
• Velocity-addition formula#Hyperbolic geometry
• Fermi–Walker transport

Footnotes

1. This preservation of orthogonality of coordinate axes should not be confused with preservation of angles between spacelike vectors taken at one and the same time in one system, which, of course, does not hold. The coordinate axes transform under the passive transformation presented, while the vectors transform under the corresponding active transformation.
2. This is sometimes called the "Mocanu paradox". Mocanu himself didn't name it a paradox, but rather a "difficulty" within the framework of relativistic electrodynamics in a 1986 paper. He was also quick to acknowledge that the problem is explained by Thomas precession Mocanu (1992), but the name lingers on.
3. In the literature, the 3d rotation matrix R may be denoted by other letters, others use a name and the relative velocity vectors involved; e.g., tom for "Thomas rotation" or gyr for "gyration" (see gyrovector space). Correspondingly the 4d rotation matrix R (non-bold italic) in this article may be denoted

   ${\displaystyle \mathrm {Tom} ={\begin{bmatrix}1&0\\0&\mathrm {tom} \end{bmatrix}}\quad {\text{or}}\quad \mathrm {Gyr} ={\begin{bmatrix}1&0\\0&\mathrm {gyr} \end{bmatrix}}}$

References

1. Rhodes & Semon 2005
2. É. Borel, Comptes Rendus 156(3), 215 (1913).
3. É. Borel, Comptes Rendus 157(17), 703 (1913).
4. Malykin, G. B. (2013-02-01). "A Method of É. Borel for calculation of the Thomas precession: The geometric phase in relativistic kinematic velocity space and its applications in optics". Optics and Spectroscopy. 114 (2): 266–273. Bibcode:2013OptSp.114..266M. doi:10.1134/S0030400X13020197. ISSN 1562-6911.
5. Thomas 1926
6. Wigner 1939
7. Rebilas 2013
8. Goldstein 1980, p. 287
9. Einstein 1922 harvnb error: no target: CITEREFEinstein1922 (help)
10. Mocanu 1992
11. Ungar 1988
12. Weinberg 2002, pp. 68–69
13. Cushing 1967
14. Sard 1970, p. 74
15. Ben-Menahem 1985
16. Ungar 1988, p. 60
17. Sexl & Urbantke 1992, pp. 40 harvnb error: no target: CITEREFSexlUrbantke1992 (help)
18. Macfarlane 1962
19. Sexl & Urbantke 1992, pp. 4, 11, 41 harvnb error: no target: CITEREFSexlUrbantke1992 (help)
20. Gourgoulhon 2013, pp. 213
21. Goldstein 1980, p. 285
22. Jackson 1999, p. 547
23. Landau & Lifshitz 2002, p. 38
24. Ryder (1996, p. 37)
25. Yeh 2023
26. Varićak 1912

• Macfarlane, A. J. (1962). "On the Restricted Lorentz Group and Groups Homomorphically Related to It". Journal of Mathematical Physics. 3 (6): 1116–1129. Bibcode:1962JMP.....3.1116M. doi:10.1063/1.1703854. hdl:2027/mdp.39015095220474.
• Sexl Urbantke mention on p. 39 Lobachevsky geometry needs to be introduced into the usual Minkowski spacetime diagrams for non-collinear velocities.
• Wigner, E. P. (1939), "On unitary representations of the inhomogeneous Lorentz group", Annals of Mathematics, 40 (1): 149–204, Bibcode:1939AnMat..40..149W, doi:10.2307/1968551, JSTOR 1968551, MR 1503456, S2CID 121773411.
• Ben-Menahem, A. (1985). "Wigner's rotation revisited". Am. J. Phys. 53 (1): 62–66. Bibcode:1985AmJPh..53...62B. doi:10.1119/1.13953.
• Ben-Menahem, S. (1986). "The Thomas precession and velocityspace curvature". J. Math. Phys. 27 (5): 1284–1286. Bibcode:1986JMP....27.1284B. doi:10.1063/1.527132.
• Cushing, J. T. (1967). "Vector Lorentz Transformations". Am. J. Phys. 35 (9): 858–862. Bibcode:1967AmJPh..35..858C. doi:10.1119/1.1974267.
• Ferraro, R., & Thibeault, M. (1999). "Generic composition of boosts: an elementary derivation of the Wigner rotation". European journal of physics 20(3):143.
• Mocanu, C.I. (1992). "On the relativistic velocity composition paradox and the Thomas rotation". Found. Phys. Lett. 5 (5): 443–456. Bibcode:1992FoPhL...5..443M. doi:10.1007/BF00690425. ISSN 0894-9875. S2CID 122472788.
• Rebilas, K. (2013). "Comment on Elementary analysis of the special relativistic combination of velocities, Wigner rotation and Thomas precession". Eur. J. Phys. 34 (3): L55–L61. Bibcode:2013EJPh...34L..55R. doi:10.1088/0143-0807/34/3/L55. S2CID 122527454. (free access)
• Rhodes, J. A.; Semon, M. D. (2005). "Relativistic velocity space, Wigner rotation and Thomas precession". Am. J. Phys. 72 (7): 943–960. arXiv:gr-qc/0501070v1. Bibcode:2005APS..NES..R001S. doi:10.1119/1.1652040. S2CID 14764378.
• Thomas, L. H. (1926). "Motion of the spinning electron". Nature. 117 (2945): 514. Bibcode:1926Natur.117..514T. doi:10.1038/117514a0. S2CID 4084303.
• Ungar, A. A. (1988). "Thomas rotation and parameterization of the Lorentz group". Foundations of Physics Letters. 1 (1): 57–81. Bibcode:1988FoPhL...1...57U. doi:10.1007/BF00661317. ISSN 0894-9875. S2CID 121240925.
• Weinberg, S. (2002), The Quantum Theory of Fields, vol. 1, Cambridge University Press, ISBN 978-0-521-55001-7
• Goldstein, H. (1980) . "Chapter 7". Classical Mechanics (2nd ed.). Reading MA: Addison-Wesley. ISBN 978-0-201-02918-5.
• Jackson, J. D. (1999) . "Chapter 11". Classical Electrodynamics (3d ed.). John Wiley & Sons. ISBN 978-0-471-30932-1.
• Jackson, J. D. (1975) . "Chapter 11". Classical Electrodynamics (2nd ed.). John Wiley & Sons. pp. 542–545. ISBN 978-0-471-43132-9.
• Landau, L.D.; Lifshitz, E.M. (2002) . The Classical Theory of Fields. Course of Theoretical Physics. Vol. 2 (4th ed.). Butterworth–Heinemann. p. 38. ISBN 0-7506-2768-9.
• Ryder, L. H. (1996) . Quantum Field Theory (2nd ed.). Cambridge: Cambridge University Press. ISBN 978-0521478144.
• Sard, R. D. (1970). Relativistic Mechanics - Special Relativity and Classical Particle Dynamics. New York: W. A. Benjamin. ISBN 978-0805384918.
• R. U. Sexl, H. K. Urbantke (1992). Relativity, Groups Particles. Special Relativity and Relativistic Symmetry in Field and Particle Physics. Springer. ISBN 978-3211834435.
• Gourgoulhon, Eric (2013). Special Relativity in General Frames: From Particles to Astrophysics. Springer. p. 213. ISBN 978-3-642-37276-6.
• Varićak, Vladimir (1912). Translation:On the Non-Euclidean Interpretation of the Theory of Relativity. Vol. 21. pp. 103–127.
• Thomas L.H The kinematics of an electron with an axis, Phil. Mag. 7, 1927 http://www.clifford.org/drbill/csueb/4250/topics/thomas_papers/Thomas1927.pdf
• Silberstein L. The Theory of Relativity, MacMillan 1914
• Yeh, L. (2023). "Wigner rotation and Euler angle parametrization". Am. J. Phys. 91 (7): 547–554. arXiv:2206.12406. Bibcode:2023AmJPh..91..547Y. doi:10.1119/5.0111222. S2CID 250072568.

Further reading

• Relativistic velocity space, Wigner rotation, and Thomas precession (2004) John A. Rhodes and Mark D. Semon
• The Hyperbolic Theory of Special Relativity (2006) by J.F. Barrett

v t e Relativity
Special relativity	Background Principle of relativity (Galilean relativity Galilean transformation) Special relativity Doubly special relativity Fundamental concepts Frame of reference Speed of light Hyperbolic orthogonality Rapidity Maxwell's equations Proper length Proper time Proper acceleration Relativistic mass Formulation Lorentz transformation Textbooks Phenomena Time dilation Mass–energy equivalence (E=mc) Length contraction Relativity of simultaneity Relativistic Doppler effect Thomas precession Ladder paradox Twin paradox Terrell rotation Spacetime Light cone World line Minkowski diagram Biquaternions Minkowski space
General relativity	Background Introduction Mathematical formulation Fundamental concepts Equivalence principle Riemannian geometry Penrose diagram Geodesics Mach's principle Formulation ADM formalism BSSN formalism Einstein field equations Linearized gravity Post-Newtonian formalism Raychaudhuri equation Hamilton–Jacobi–Einstein equation Ernst equation Phenomena Black hole Event horizon Singularity Two-body problem Gravitational waves: astronomy detectors (LIGO and collaboration Virgo LISA Pathfinder GEO) Hulse–Taylor binary Other tests: precession of Mercury lensing (together with Einstein cross and Einstein rings) redshift Shapiro delay frame-dragging / geodetic effect (Lense–Thirring precession) pulsar timing arrays Advanced theories Brans–Dicke theory Kaluza–Klein Quantum gravity Solutions Cosmological: Friedmann–Lemaître–Robertson–Walker (Friedmann equations) Lemaître–Tolman Kasner BKL singularity Gödel Milne Spherical: Schwarzschild (interior Tolman–Oppenheimer–Volkoff equation) Reissner–Nordström Axisymmetric: Kerr (Kerr–Newman) Weyl−Lewis−Papapetrou Taub–NUT van Stockum dust discs Others: pp-wave Ozsváth–Schücking Alcubierre In computational physics: Numerical relativity
Scientists	Poincaré Lorentz Einstein Hilbert Schwarzschild de Sitter Weyl Eddington Friedmann Lemaître Milne Robertson Chandrasekhar Zwicky Wheeler Choquet-Bruhat Kerr Zel'dovich Novikov Ehlers Geroch Penrose Hawking Taylor Hulse Bondi Misner Yau Thorne Weiss others
Category

• Special relativity
• Coordinate systems
• Theory of relativity
• Mathematical physics