Misplaced Pages

Time-varying phasor

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Analysing signals
This article is an orphan, as no other articles link to it. Please introduce links to this page from related articles; try the Find link tool for suggestions. (December 2024)

In communication theory, time-varying phasors are used for analyzing narrow-band signals, whose signal bandwidths in the frequency domain are considerably smaller than the carrier frequency. Time-varying phasors are mostly used for analysis of frequency domain of band-pass systems. The method uses classical impulse response.

In electrical power system, phasors are used for transient analysis of the power system keeping the quasi-stationary conditions. They were introduced to facilitate the computation and analysis of power systems in stationary operation. Time-varying phasors are used in dynamic analysis of a large power system. The phasor representation of sinusoidal voltages and currents is generalized to arbitrary waveforms. This mathematical transformation eliminates the 60 Hertz (Hz) carrier which is the only time-varying element in the stationary case. The longer usage of time-varying phasors in large power systems since 1920s have created many misconceptions. One of the misuses suggest that quasi-stationary models are always accurate, but only when the system dynamics are slow as compared to nominal system frequency which is usually 60 Hz.

The concern to study time-varying phasors is raised to understand in-depth the fast amplitude and phase variations of emerging electrical power generator technologies. This is because current and voltage signals of latest machines may have harmonic components and they can damage the entire transmission system which is coupled with the machine. However, if we employ quasi-static model, we can accurately model AC signals by using time-varying phasors as opposed to traditional quasi-static model which supports constant voltage and current signals throughout the network.

References

  1. ^ Venkatasubramanian, V. (1994). "Tools for dynamic analysis of the general large power system using time-varying phasors". International Journal of Electrical Power & Energy Systems. 16 (6): 365–376. doi:10.1016/0142-0615(94)90023-X. S2CID 109676900.
  2. ^ Jeltsema, Dimitri (2015). Camlibel, M. Kanat; Julius, A. Agung; Pasumarthy, Ramkrishna; Scherpen, Jacquelien M.A. (eds.). "Time-Varying Phasors and Their Application to Power Analysis". Mathematical Control Theory I. Lecture Notes in Control and Information Sciences. 461. Cham: Springer International Publishing: 51–72. doi:10.1007/978-3-319-20988-3_4. ISBN 978-3-319-20988-3.
  3. ^ Venkatasubramanian, V.; Schattler, H.; Zaborszky, J. (November 1995). "Fast time-varying phasor analysis in the balanced three-phase large electric power system". IEEE Transactions on Automatic Control. 40 (11): 1975–1982. doi:10.1109/9.471228. ISSN 1558-2523.
  4. ^ Belikov, J.; Levron, Y. (December 2018). "Uses and Misuses of Quasi-Static Time-Varying Phasor Models in Power Systems". IEEE Transactions on Power Delivery. 33 (6): 3263–3266. doi:10.1109/TPWRD.2018.2852950. ISSN 1937-4208. S2CID 53741086.
  5. ^ "Comparison of time-varying phasor and dq0 dynamic models for large transmission networks". ResearchGate. Retrieved 2021-01-28.
Categories: