Misplaced Pages

Tin(IV) oxide

Names
IUPAC name Tin (IV) Oxide
Other names Stannic oxide, Tin(IV) oxide, Flowers of tin, Cassiterite
Identifiers
CAS Number	18282-10-5 13472-47-4 (hydrate)
3D model (JSmol)	(O=Sn=O): Interactive image
ChemSpider	26988
ECHA InfoCard	100.038.311
EC Number	242-159-0
PubChem CID	29011
RTECS number	XQ4000000
UNII	KM7N50LOS6
CompTox Dashboard (EPA)	DTXSID201316016 DTXSID8042474, DTXSID201316016
InChI InChI=1S/2O.SnKey: XOLBLPGZBRYERU-UHFFFAOYSA-N
SMILES (O=Sn=O): O==O
Properties
Chemical formula	O2Sn
Molar mass	150.708 g·mol
Appearance	Yellowish or light grey powder
Odor	Odorless
Density	6.95 g/cm (20 °C) 6.85 g/cm (24 °C)
Melting point	1,630 °C (2,970 °F; 1,900 K)
Boiling point	1,800–1,900 °C (3,270–3,450 °F; 2,070–2,170 K) Sublimes
Solubility in water	Insoluble
Solubility	Soluble in hot concentrated alkalis, concentrated acids Insoluble in alcohol
Magnetic susceptibility (χ)	−4.1·10 cm/mol
Refractive index (nD)	2.006
Structure
Crystal structure	Rutile tetragonal, tP6
Space group	P42/mnm, No. 136
Point group	4/m 2/m 2/m
Lattice constant	a = 4.737 Å, c = 3.185 Åα = 90°, β = 90°, γ = 90°
Coordination geometry	Octahedral (Sn) Trigonal planar (O)
Thermochemistry
Heat capacity (C)	52.6 J/mol·K
Std molar entropy (S298)	49.04 J/mol·K
Std enthalpy of formation (ΔfH298)	−577.63 kJ/mol
Gibbs free energy (ΔfG)	−515.8 kJ/mol
Hazards
NFPA 704 (fire diamond)	1 0 0
Lethal dose or concentration (LD, LC):
LD50 (median dose)	> 20 g/kg (rats, oral)
NIOSH (US health exposure limits):
PEL (Permissible)	none
REL (Recommended)	TWA 2 mg/m
IDLH (Immediate danger)	N.D.
Safety data sheet (SDS)	ICSC 0954
Related compounds
Related tin oxides	Tin(II) oxide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C , 100 kPa). N verify (what is  ?) Infobox references

Tin(IV) oxide, also known as stannic oxide, is the inorganic compound with the formula SnO₂. The mineral form of SnO₂ is called cassiterite, and this is the main ore of tin. With many other names, this oxide of tin is an important material in tin chemistry. It is a colourless, diamagnetic, amphoteric solid.

Structure

Tin(IV) oxide crystallises with the rutile structure. As such the tin atoms are six coordinate and the oxygen atoms three coordinate. SnO₂ is usually regarded as an oxygen-deficient n-type semiconductor.

Hydrous forms of SnO₂ have been described as stannic acid. Such materials appear to be hydrated particles of SnO₂ where the composition reflects the particle size.

Preparation

Tin(IV) oxide occurs naturally. Synthetic tin(IV) oxide is produced by burning tin metal in air. Annual production is in the range of 10 kilotons. SnO₂ is reduced industrially to the metal with carbon in a reverberatory furnace at 1200–1300 °C.

Amphoterism

Although SnO₂ is insoluble in water, it is amphoteric, dissolving in base and acid. "Stannic acid" refers to hydrated tin (IV) oxide, SnO₂, which is also called "stannic oxide."

Tin oxides dissolve in acids. Halogen acids attack SnO₂ to give hexahalostannates, such as . One report describes reacting a sample in refluxing HI for many hours.

SnO₂ + 6 HI → H₂SnI₆ + 2 H₂O

Similarly, SnO₂ dissolves in sulfuric acid to give the sulfate:

SnO₂ + 2 H₂SO₄ → Sn(SO₄)₂ + 2 H₂O

The latter compound can add additional hydrogen sulfate ligands to give hexahydrogensulfatostannic acid.

SnO₂ dissolves in strong bases to give "stannates," with the nominal formula Na₂SnO₃. Dissolving the solidified SnO₂/NaOH melt in water gives Na₂, "preparing salt," which is used in the dye industry.

Uses

In conjunction with vanadium oxide, it is used as a catalyst for the oxidation of aromatic compounds in the synthesis of carboxylic acids and acid anhydrides.

Ceramic glazes

Tin(IV) oxide has long been used as an opacifier and as a white colorant in ceramic glazes.'The Glazer's Book' – 2nd edition. A.B.Searle.The Technical Press Limited. London. 1935. This has probably led to the discovery of the pigment lead-tin-yellow, which was produced using tin(IV) oxide as a compound. The use of tin(IV) oxide has been particularly common in glazes for earthenware, sanitaryware and wall tiles; see the articles tin-glazing and Tin-glazed pottery. Tin oxide remains in suspension in vitreous matrix of the fired glazes, and, with its high refractive index being sufficiently different from the matrix, light is scattered, and hence increases the opacity of the glaze. The degree of dissolution increases with the firing temperature, and hence the extent of opacity diminishes. Although dependent on the other constituents the solubility of tin oxide in glaze melts is generally low. Its solubility is increased by Na₂O, K₂O and B₂O₃, and reduced by CaO, BaO, ZnO, Al₂O₃, and to a limited extent PbO.

SnO₂ has been used as pigment in the manufacture of glasses, enamels and ceramic glazes. Pure SnO₂ gives a milky white colour; other colours are achieved when mixed with other metallic oxides e.g. V₂O₅ yellow; Cr₂O₃ pink; and Sb₂O₅ grey blue.

Dyes

This oxide of tin has been utilized as a mordant in the dyeing process since ancient Egypt. A German by the name of Kuster first introduced its use to London in 1533 and by means of it alone, the color scarlet was produced there.

Polishing

Tin(IV) oxide can be used as a polishing powder, sometimes in mixtures also with lead oxide, for polishing glass, jewelry, marble and silver. Tin(IV) oxide for this use is sometimes called as "putty powder" or "jeweler's putty".

Glass coatings

SnO₂ coatings can be applied using chemical vapor deposition, vapour deposition techniques that employ SnCl₄ or organotin trihalides e.g. butyltin trichloride as the volatile agent. This technique is used to coat glass bottles with a thin (<0.1 μm) layer of SnO₂, which helps to adhere a subsequent, protective polymer coating such as polyethylene to the glass.

Thicker layers doped with Sb or F ions are electrically conducting and used in electroluminescent devices and photovoltaics.

Gas sensing

SnO₂ is used in sensors of combustible gases including carbon monoxide detectors. In these the sensor area is heated to a constant temperature (few hundred °C) and in the presence of a combustible gas the electrical resistivity drops. Room temperature gas sensors are also being developed using reduced graphene oxide-SnO₂ composites(e.g. for ethanol detection).

Doping with various compounds has been investigated (e.g. with CuO). Doping with cobalt and manganese, gives a material that can be used in e.g. high voltage varistors. Tin(IV) oxide can be doped with the oxides of iron or manganese.

References

1. ^ "Material Name: stannic oxide". Museum of Fine Arts, Boston. February 10, 2007. Archived from the original on November 4, 2012. Retrieved March 29, 2013.
2. ^ NIOSH Pocket Guide to Chemical Hazards. "#0616". National Institute for Occupational Safety and Health (NIOSH).
3. ^ CID 29011 from PubChem
4. ^ Lide, David R., ed. (2009). CRC Handbook of Chemistry and Physics (90th ed.). Boca Raton, Florida: CRC Press. ISBN 978-1-4200-9084-0.
5. Pradyot, Patnaik (2003). Handbook of Inorganic Chemicals. The McGraw-Hill Companies, Inc. p. 940. ISBN 0-07-049439-8.
6. ^ Baur, W.H. (1956). "Über die Verfeinerung der Kristallstrukturbestimmung einiger Vertreter des Rutiltyps: TiO₂, SnO₂, GeO₂ und MgF₂". Acta Crystallographica. 9 (6): 515–520. Bibcode:1956AcCry...9..515B. doi:10.1107/S0365110X56001388.
7. ^ Stannic oxide in Linstrom, Peter J.; Mallard, William G. (eds.); NIST Chemistry WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg (MD) (retrieved July 4, 2014)
8. ^ "MSDS of Tin(IV) oxide". fishersci.ca. Fisher Scientific. Retrieved July 4, 2014.
9. ^ Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 447–48. ISBN 978-0-08-022057-4.
10. Solid State Chemistry: An Introduction Lesley Smart, Elaine A. Moore (2005) CRC Press ISBN 0-7487-7516-1
11. ^ Holleman, Arnold Frederik; Wiberg, Egon (2001), Wiberg, Nils (ed.), Inorganic Chemistry, translated by Eagleson, Mary; Brewer, William, San Diego/Berlin: Academic Press/De Gruyter, ISBN 0-12-352651-5
12. Tin: Inorganic chemistry, J L Wardell, Encyclopedia of Inorganic Chemistry ed R. Bruce King, John Wiley & Son Ltd., (1995) ISBN 0-471-93620-0
13. ^ Inorganic & Theoretical chemistry, F. Sherwood Taylor, Heineman, 6th Edition (1942)
14. Donaldson & Grimes in Chemistry of tin ed. P.G. Harrison Blackie (1989)
15. Earle R. Caley (1932). "The Action Of Hydriodic Acid On Stannic Oxide". J. Am. Chem. Soc. 54 (8): 3240–3243. doi:10.1021/ja01347a028.
16. Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. p. 844. ISBN 978-0-08-022057-4.
17. Hermann Kühn, 1967, "Blei-Zinn-Gelb und seine Verwendung in der Malerei", Farbe und Lack 73: 938-949
18. 'A Treatise On Ceramic Industries.' E.Bourry. Fourth edition. Scott, Greenwood & son. London. 1926.
19. 'Ceramic Glazes' Third edition. C.W.Parmelee & C.G.Harman. Cahners Books, Boston, Massachusetts. 1973.
20. Sir Thomas Edward Thorpe History of Chemistry (1909) Vol. 1, pp. 11-12.
21. Thomas Mortimer, A General Dictionary of Commerce, Trade, and Manufactures (1810) "Dying or Dyeing"
22. US 4130673, Larkin, William A., "Process of applying tin oxide on glass using butyltin trichloride", published 1978-12-19, assigned to M & T Chemicals Inc. 
23. Joseph Watson The stannic oxide semiconductor gas sensor in The Electrical engineering Handbook 3d Edition; Sensors Nanoscience Biomedical Engineering and Instruments ed R.C Dorf CRC Press Taylor and Francis ISBN 0-8493-7346-8
24. Jayaweera, M.T.V.P., De Silva, R.C.L., Kottegoda, I.R.M. and Rosa, S.R.D., 2015. Synthesis, characterization and ethanol vapor sensing performance of SnO2/Graphene composite film. Sri Lankan Journal of Physics, 15, pp.1–10. DOI: http://doi.org/10.4038/sljp.v15i0.6345
25. Wang, Chun-Ming; Wang, Jin-Feng; Su, Wen-Bin (2006). "Microstructural Morphology and Electrical Properties of Copper- and Niobium-Doped Tin (IV) oxide Polycrystalline Varistors". Journal of the American Ceramic Society. 89 (8): 2502–2508. doi:10.1111/j.1551-2916.2006.01076.x.
26. Dibb A.; Cilense M; Bueno P.R; Maniette Y.; Varela J.A.; Longo E. (2006). "Evaluation of Rare Earth Oxides doping SnO₂.(Co_0.25,Mn_0.75)O-based Varistor System". Materials Research. 9 (3): 339–343. doi:10.1590/S1516-14392006000300015. hdl:11449/30580.
27. A. Punnoose; J. Hays; A. Thurber; M. H. Engelhard; R. K. Kukkadapu; C. Wang; V. Shutthanandan & S. Thevuthasan (2005). "Development of high-temperature ferromagnetism in SnO2 and paramagnetism in SnO by Fe doping". Phys. Rev. B. 72 (8): 054402. Bibcode:2005PhRvB..72e4402P. doi:10.1103/PhysRevB.72.054402.

Further reading

• "How Pilkington Energy Advantage™ Low-E Glass Works" (PDF). Pilkington Group Limited. July 18, 2005. Retrieved December 2, 2012. Technical discussion of how SnO₂:F is used in low-emissivity (low-E) windows. The report includes reflectance and transmittance spectra.
• "NIOSH Pocket Guide to Chemical Hazards - Tin(IV) oxide (as Sn)". Centers for Disease Control and Prevention. April 4, 2011. Retrieved November 5, 2013. Information on chemical safety and exposure limits

• Oxides
• Tin(IV) compounds
• Semiconductor materials