This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (November 2014) (Learn how and when to remove this message) |
Type 1 heavy machine gun | |
---|---|
Type | Heavy machine gun |
Place of origin | Empire of Japan |
Service history | |
In service | 1942–1945 |
Used by | Imperial Japanese Army Indonesia Armed Forces |
Wars | World War II Indonesian National Revolution |
Production history | |
Designed | 1940–1941 |
Produced | 1942–1945 |
Specifications | |
Mass | 36.8 kg (81 lb) (gun & tripod) |
Length | 1,077 mm (42 in) |
Barrel length | 589 mm (23.2 in) |
Cartridge | 7.7×58mm Arisaka |
Action | Gas-operated |
Rate of fire | 400–450 round/min |
Muzzle velocity | 770 m/s (2,500 ft/s) |
Effective firing range | 1.4 km (0.87 mi) |
Maximum firing range | 4.1 km (2.5 mi) |
Feed system | Metal 30-round feed trays |
Sights | Blade front sight with rear peep sight, graduated from 100 to 2,200 meters, with provision for mounting a telescope. |
The Type 1 heavy machine gun (一式重機関銃, Ichi-shiki jū-kikanjū) was a heavy machine gun used by the Imperial Japanese Army during the later stages of the Second World War. Though seemingly intended to replace the older Type 92 heavy machine gun, the weapon never underwent the same level of mass production as its predecessor due to either material shortages or the fact that the Type 92 heavy machine gun was deemed as acceptable.
Description
The Type 1 is essentially a smaller, lighter version of the Type 92 heavy machine gun. It employs the same principles of operation, simply with scaled down components. The barrel is designed to be rapidly changed in the field to prevent overheating, as a result the barrel cooling rings were reduced in size and the barrel jacket was done away with entirely. It was fed from 30-round brass feed strips. The overall rate of fire was higher than that of the Type 92 heavy machine gun. Like previous Japanese heavy machine gun models, the Type 1 was strip fed with 30 round strips. It was mounted in the same way as previous Japanese machine guns and issued to machine gun companies at the battalion level.
See also
References
- Bloomfield, Lincoln P.; Leiss, Amelia Catherine (30 June 1967). The Control of local conflict : a design study on arms control and limited war in the developing areas (PDF). Vol. 3. Massachusetts Institute of Technology. Center for International Studies. p. 92. hdl:2027/uiug.30112064404368. Archived (PDF) from the original on August 4, 2020.
- Ian McCollum (2014). "Japanese Type 1 HMG". Forgotten Weapons.
- "The New Juki". Intelligence Bulletin. III (10). U.S. War Department. June 1945.
- "TYPE 01 MACHINE GUN - Quartermaster Section".
- TM-E 30-480, Handbook on Japanese Military Forces. United States War Department. 1944.
Japanese infantry weapons of World War II | |
---|---|
Bladed weapons | Swords: Guntō, Bayonets: Type 30, Type 2 |
Handguns | |
Rifles (Arisaka) | |
Rifles (other) | |
Submachine guns | |
Light machine guns | |
Heavy machine guns | |
Hand grenades | |
Grenade launchers and attachments | |
Rocket launchers | |
Flamethrowers | |
Rifle cartridges | |
Handgun cartridges |
This article relating to machine guns is a stub. You can help Misplaced Pages by expanding it. |