.jpg) Richard Snyder arriving at her homeport
| |
| History | |
|---|---|
 United States | |
| Name | Richard Snyder |
| Namesake | Richard Snyder |
| Operator | United States Coast Guard |
| Builder | Bollinger Shipyards, Lockport, Louisiana |
| Launched | February 8, 2018 |
| Acquired | February 8, 2018 |
| Commissioned | April 20, 2018 |
| Homeport | Atlantic Beach |
| Identification |
|
| Motto | Never yield |
| Status | in active service |
| Badge | _CoA.jpg) |
| General characteristics | |
| Class and type | Sentinel-class cutter |
| Displacement | 353 long tons (359 t) |
| Length | 46.8 m (154 ft) |
| Beam | 8.11 m (26.6 ft) |
| Depth | 2.9 m (9.5 ft) |
| Propulsion |
|
| Speed | 28 knots (52 km/h; 32 mph) |
| Range | 2,500 nautical miles (4,600 km; 2,900 mi) |
| Endurance | 5 days |
| Boats & landing craft carried | 1 × Cutter Boat - Over the Horizon Interceptor |
| Complement | 4 officers, 20 enlisted |
| Sensors and processing systems | L-3 C4ISR suite |
| Armament |
|
USCGC Richard Snyder (WPC-1127) is the 27th Sentinel-class cutter built for the United States Coast Guard. She is the first of her class to be home-ported in Atlantic Beach, North Carolina.
Design
Like her sister ships, Richard Snyder is designed to perform search and rescue missions, port security, and the interception of smugglers. She is armed with a remotely controlled, gyrostabilized 25 mm autocannon, four crew served M2 Browning machine guns, and light arms. She is equipped with a stern launching ramp that allows her to launch or retrieve a water-jet propelled high-speed auxiliary boat without first coming to a stop. Her high-speed boat has over-the-horizon capability, and is useful for inspecting other vessels and deploying boarding parties. She is designed to support her crew of 24 for missions of up to five days over distances of almost 3,000 nautical miles (5,556 km; 3,452 mi).
Operational history
Richard Snyder was delivered to a Coast Guard base in Key West for her sea trials on February 8, 2018. She was commissioned on April 20, 2018 at her home port in Atlantic Beach, North Carolina.
 Richard Snyder in Tampa, FL during drydock.
|
Namesake
In 2010, Charles "Skip" W. Bowen, who was then the United States Coast Guard's most senior non-commissioned officer, proposed that all 58 cutters in the Sentinel class should be named after enlisted sailors in the Coast Guard, or one of its precursor services, who were recognized for their heroism. In 2015 the Coast Guard announced that Richard Snyder, who was awarded a Silver Star for attacking Japanese ground forces during an amphibious assault on the island of Biak, would be the namesake of the 27th cutter.
References
- ^ "Coast Guard Accepts 27th Fast Response Cutter" (Press release). United States Coast Guard. 2018-02-09. Retrieved 2018-02-10.
- ^ "Coast Guard Cutter Richard Snyder commissioned in Atlantic Beach". Coast Guard News. 2018-04-20. Retrieved 2018-04-20.
- ^
"U.S. Coast Guard Accepts 27th Fast Response Cutter, USCGC Richard Snyder". DefPost. 2018-02-10. Retrieved 2018-02-10.
USCGC Richard Snyder will be the first Sentinel-class cutter (FRC) stationed in Atlantic Beach, North Carolina, and will be commissioned in April.
-
"FRC Plan B: The Sentinel Class". Defense Industry Daily. 2014-05-02. Archived from the original on 2014-07-07. Retrieved 2014-04-03.
All of these boats will be named after enlisted Coast Guard heroes, who distinguished themselves in USCG or military service. The first 25 have been named, but only 8 have been commissioned...
- Boyd, Jason O. (2018-04-20). "Coast Guard commissions Fast Response Cutter Richard Snyder". wcti12.com. Retrieved 2018-04-22.
-
"Acquisition Update: Coast Guard Reveals Names of FRCs 26-35". US Coast Guard. 2015-02-27. Archived from the original on 2015-03-05. Retrieved 2017-03-25.
The Coast Guard recently announced the names of the 26th through 35th Sentinel-class fast response cutters through a series of posts on its official blog, the Coast Guard Compass.
-
Susan Schept (2010-03-22). "Enlisted heroes honored". United States Coast Guard. Archived from the original on 2011-12-03. Retrieved 2013-02-01.
After the passing of several well-known Coast Guard heroes last year, Master Chief Petty Officer of the Coast Guard Charles "Skip" Bowen mentioned in his blog that the Coast Guard does not do enough to honor its fallen heroes.
-
"U.S. Coast Guard announces name for first Sentinel-class cutter". 2010-03-22. Archived from the original on 2010-03-25. Retrieved 2013-02-01.
Previously designated to be named the Coast Guard Cutter Sentinel, the cutter Bernard C. Webber will be the first of the service's new 153-foot patrol cutters. Coast Guard Commandant Admiral Thad Allen approved the change of the cutter's name to allow this class of vessels to be named after outstanding enlisted members who demonstrated exceptional heroism in the line of duty. This will be the first class of cutters to be named exclusively for enlisted members of the Coast Guard and its predecessor services.