Misplaced Pages

Virtual IP address

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
IP address that doesn't correspond to an actual physical network interface

A virtual IP address (VIP or VIPA) is an IP address that does not correspond to a physical network interface. Uses for VIPs include network address translation (especially, one-to-many NAT), fault-tolerance, and mobility.

Usage

For one-to-many NAT, a VIP address is advertised from the NAT device (often a router), and incoming data packets destined to that VIP address are routed to different actual IP addresses (with address translation). These VIP addresses have several variations and implementation scenarios, including Common Address Redundancy Protocol (CARP) and Proxy ARP. In addition, if there are multiple actual IP addresses, load balancing can be performed as part of NAT.

VIP addresses are also used for connection redundancy by providing alternative fail-over options for one machine. For this to work, the host has to run an interior gateway protocol like Open Shortest Path First (OSPF), and appear as a router to the rest of the network. It advertises virtual links connected via itself to all of its actual network interfaces. If one network interface fails, normal OSPF topology reconvergence will cause traffic to be sent via another interface.

A VIP address can be used to provide nearly unlimited mobility. For example, if an application has an IP address on a physical subnet, that application can be moved only to a host on that same subnet. VIP addresses can be advertised on their own subnet, so its application can be moved anywhere on the reachable network without changing addresses.

A virtual IP address (VIP or VIPA) is an IP address that does not correspond to a physical network interface. Uses for VIPs include network address translation (especially, one-to-many NAT), fault-tolerance, and mobility.

Notes

  1. This typically accomplished using a full netmask, 32-bits for IPv4 and 128 bits for IPv6, such that the subnet and VIP address are the same and there is just the single VIP address in the subnet.

References

  1. "What is a VIP?". Juniper Networks. Retrieved 2017-10-14.
  2. ^ "Virtual IP Address Benefits". Novell. Retrieved 2017-10-14.
  3. "What is virtual IP address?". Webopedia. 11 August 2005. Retrieved 2017-10-14.
Categories: