Visible light communication

(Redirected from Visible light communications) Use of light in the visible spectrum as a telecommunication medium

In telecommunications, visible light communication (VLC) is the use of visible light (light with a frequency of 400–800 THz/wavelength of 780–375 nm) as a transmission medium. VLC is a subset of optical wireless communications technologies.

The technology uses fluorescent lamps (ordinary lamps, not special communications devices) to transmit signals at 10 kbit/s, or LEDs for up to 500 Mbit/s over short distances. Systems such as RONJA can transmit at full Ethernet speed (10 Mbit/s) over distances of 1–2 kilometres (0.6–1.2 mi).

Specially designed electronic devices generally containing a photodiode receive signals from light sources, although in some cases a cell phone camera or a digital camera will be sufficient. The image sensor used in these devices is in fact an array of photodiodes (pixels) and in some applications its use may be preferred over a single photodiode. Such a sensor may provide either multi-channel (down to 1 pixel = 1 channel) or a spatial awareness of multiple light sources.

VLC can be used as a communications medium for ubiquitous computing, because light-producing devices (such as indoor/outdoor lamps, TVs, traffic signs, commercial displays and car headlights/taillights) are used everywhere.

Uses

One of the main characteristics of VLC is the incapacity of light to surpass physical opaque barriers. This characteristic can be considered a weak point of VLC, due to the susceptibility of interference from physical objects, but is also one of its many strengths: unlike radio waves, light waves are confined in the enclosed spaces they are transmitted, which enforces a physical safety barrier that requires a receptor of that signal to have physical access to the place where the transmission is occurring.

A promising application of VLC is the Indoor Positioning System (IPS), an analogue to GPS which is built to operate in enclosed spaces where GPS satellite transmissions cannot reach. For instance, commercial buildings, shopping malls, parking garages, as well as subways and tunnel systems are all possible applications for VLC-based indoor positioning systems. Additionally, once the VLC lamps are able to perform lighting at the same time as data transmission, it can simply occupy the installation of traditional single-function lamps.

Other applications for VLC involve communication between appliances of a smart home or office. With increasing IoT-capable devices, connectivity through traditional radio waves might be subjected to interference. Light bulbs with VLC capabilities can transmit data and commands for such devices.

History

The history of visible light communications dates back to the 1880s in Washington, D.C., when the Scottish-born scientist Alexander Graham Bell invented the photophone, which transmitted speech on modulated sunlight over several hundred meters. This pre-dates the transmission of speech by radio.

More recent work began in 2003 at Nakagawa Laboratory, in Keio University, Japan, using LEDs to transmit data by visible light. Since then there have been numerous research activities focussed on VLC.

In 2006, researchers from CICTR at Penn State proposed a combination of power line communication (PLC) and white light LED to provide broadband access for indoor applications. This research suggested that VLC could be deployed as a perfect last-mile solution in the future.

In January 2010 a team of researchers from Siemens and Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, in Berlin, demonstrated transmission at 500 Mbit/s with a white LED over a distance of 5 metres (16 ft), and 100 Mbit/s over longer distance using five LEDs.

The VLC standardization process is conducted within the IEEE 802.15.7 working group.

In December 2010 St. Cloud, Minnesota, signed a contract with LVX Minnesota and became the first to commercially deploy this technology.

In July 2011 a presentation at TED Global gave a live demonstration of high-definition video being transmitted from a standard LED lamp, and proposed the term Li-Fi to refer to a subset of VLC technology.

Recently, VLC-based indoor positioning systems have become an attractive topic. ABI research forecasts that it could be a key solution to unlocking the $5 billion "indoor location market". Publications have been coming from Nakagawa Laboratory, ByteLight filed a patent on a light positioning system using LED digital pulse recognition in March 2012. COWA at Penn State and other researchers around the world.

Another recent application is in the world of toys, thanks to cost-efficient and low-complexity implementation, which only requires one microcontroller and one LED as optical front-end.

VLCs can be used for providing security. They are especially useful in body sensor networks and personal area networks.

Recently Organic LEDs (OLED) have been used as optical transceivers to build up VLC communication links up to 10 Mbit/s.

In October 2014, Axrtek launched a commercial bidirectional RGB LED VLC system called MOMO that transmits down and up at speeds of 300 Mbit/s and with a range of 25 feet.

In May 2015, Philips collaborated with supermarket company Carrefour to deliver VLC location-based services to shoppers' smartphones in a hypermarket in Lille, France. In June 2015, two Chinese companies, Kuang-Chi and Ping An Bank, partnered to introduce a payment card that communicates information through a unique visible light. In March 2017, Philips set up the first VLC location-based services to shoppers' smartphones in Germany. The installation was presented at EuroShop in Düsseldorf (5–9 March). As first supermarket in Germany an Edeka supermarket in Düsseldorf-Bilk is using the system, which offers a 30 centimeter positioning accuracy can be achieved, which meets the special demands in food retail. Indoor positioning systems based on VLC can be used in places such as hospitals, eldercare homes, warehouses, and large, open offices to locate people and control indoor robotic vehicles.

There is wireless network that for data transmission uses visible light, and does not use intensity modulation of optical sources. The idea is to use vibration generator instead of optical sources for data transmission.

Modulation Techniques

In order to send data, a modulation of light is required. A modulation is the form in which the light signal varies in order to represent different symbols. In order for the data to be decoded. Unlike radio transmission, a VLC modulation requires the light signal to be modulated around a positive dc value, responsible for the lighting aspect of the lamp. The modulation will thus be an alternating signal around the positive dc level, with a high-enough frequency to be imperceptible to the human eye.

Due to this superposition of signals, implementation of VLC transmitter usually require a high-efficiency, higher-power, slower response DC converter responsible for the LED bias that will provide lighting, alongside a lower-efficiency, lower-power, but higher response velocity amplifier in order to synthesize the required AC current modulation.

There are several modulation techniques available, forming three main groups: Single-Carrier Modulated Transmission (SCMT), Multi-Carrier Modulated Transmission (MCMT) and Pulse-Based Transmission (PBT).

Single-Carrier Modulated Transmission

The Single-Carrier Modulated Transmission comprises modulation techniques established for traditional forms of transmission, such as radio. A sinusoidal wave is added to the lighting dc level, allowing digital information to be coded in the characteristics of the wave. By keying between two or several different values of a given characteristic, symbols attributed to each value are transmitted on the light link.

Possible techniques are Amplitude Switch Keying (ASK), Phase Switch Keying (PSK) and Frequency Switch Keying (FSK). Out of these three, FSK is capable of larger bitrate transmission once it allows more symbols to be easily differentiated on frequency switching. An additional technique called Quadrature Amplitude Modulation (QAM) has also been proposed, where both amplitude and phase of the sinusoidal voltage are keyed simultaneously in order to increase the possible number of symbols.

Multi-Carrier Modulated Transmission

Multi-Carrier Modulated Transmission works on the same way of Single-Carrier Modulated Transmission methods, but embed two or more sinusoidal waves modulated for data transmission. This type of modulation is among the hardest and more complex to synthesize and decode. However, it presents the advantage of excelling in multipath transmission, where the receptor is not in direct view of the transmitter and therefore makes the transmission depend on reflection of the light in other barriers.

Pulse-Based Transmission

Pulse-Based transmission encompasses modulation techniques in which the data is encoded not on a sinusoidal wave, but on a pulsed wave. Unlike sinusoidal alternating signals, in which the periodic average will always be null, pulsed waves based on high-low states will present inherit average values. This brings two main advantages for the Pulse-Based Transmission modulations:

It can be implemented with a single high-power, high-efficiency, dc converter of slow response and an additional power switch operating in fast speeds to deliver current to the LED at determined instants. Once the average value depends on the pulse width of the data signal, the same switch that operates the data transmission can provide dimming control, greatly simplifying the dc converter.

Due to these important implementation advantages, these dimming-capable modulations have been standardized in IEEE 802.15.7, in which are described three modulation techniques: On-Off Keying (OOK), Variable Pulse Position Modulation (VPPM) and Color Shift Keying (CSK).

On-Off Keying

On the On-Off Keying technique, the LED is switched on and off repeatedly, and the symbols are differentiated by the pulse width, with a wider pulse representing the logical high '1', while narrower pulses representing logical low '0'. Because the data is encoded on the pulse width, the information sent will affect the dimming level if not corrected: for instance, a bitstream with several high values '1' will appear brighter than a bitstream with several low values '0'. In order to fix this problem, the modulation requires a compensation pulse that will be inserted on the data period whenever necessary to equalize the brightness overall. The lack of this compensation symbol could introduce perceived flickering, which is undesirable.

Because of the additional compensation pulse, modulating this wave is slightly more complex than modulating the VPPM. However, the information encoded on the pulse width is easy to differentiate and decode, so the complexity of the transmitter is balanced by the simplicity of the receiver.

Variable Pulse Position Modulation

Variable Pulse Position also switches the LED on and off repeatedly, but encode the symbols on the pulse position inside the data period. Whenever the pulse is located at the immediate beginning of the data period, the transmitted symbol is standardized as logical low '0', with logical high '1' being composed of pulses that end with the data period. Because the information is encoded at the location of the pulse inside the data period, both pulses can and will have the same width, and thus, no compensation symbol is required. Dimming is performed by the transmitting algorithm, that will select the width of the data pulses accordingly.

The lack of a compensation pulse makes VPPM marginally simpler to encode when compared to OOK. However, a slightly more complex demodulation compensates for that simplicity on the VPPM technique. This decoding complexity mostly comes from the information being encoded at different rising edges for each symbol, which makes the sampling harder in a microcontroller. Additionally, in order to decode the location of a pulse within the data period, the receptor must be somehow synchronized with the transmitter, knowing exactly when a data period starts and how long it lasts. These characteristics makes the demodulation of a VPPM signal slightly more difficult to implement.

Color Shift Keying

Color shift keying (CSK), outlined in IEEE 802.15.7, is an intensity modulation based modulation scheme for VLC. CSK is intensity-based, as the modulated signal takes on an instantaneous color equal to the physical sum of three (red/green/blue) LED instantaneous intensities. This modulated signal jumps instantaneously, from symbol to symbol, across different visible colors; hence, CSK can be construed as a form of frequency shifting. However, this instantaneous variation in the transmitted color is not to be humanly perceptible, because of the limited temporal sensitivity in the human vision — the "critical flicker fusion threshold" (CFF) and the "critical color fusion threshold" (CCF), both of which cannot resolve temporal changes shorter than 0.01 second. The LEDs’ transmissions are, therefore, preset to time-average (over the CFF and the CCF) to a specific time-constant color. Humans can thus perceive only this preset color that seems constant over time, but cannot perceive the instantaneous color that varies rapidly in time. In other words, CSK transmission maintains a constant time-averaged luminous flux, even as its symbol sequence varies rapidly in chromaticity.

References

^ "Image Sensor Communication". VLC Consortium.
^ "About Visible Light Communication". VLC Consortium. Archived from the original on December 3, 2009.
"Intelligent Transport System – Visible Light Communication". VLC Consortium. Archived from the original on January 28, 2010.
Dimitrov, Svilen; Haas, Harald (2015). Principles of LED Light Communications: Towards Networked Li-Fi. Cambridge: Cambridge University Press. doi:10.1017/cbo9781107278929. ISBN 978-1-107-04942-0.
"Cisco Annual Internet Report - Cisco Annual Internet Report (2018–2023) White Paper". Cisco. Retrieved 2020-10-21.
M. Kavehrad, P. Amirshahi, "Hybrid MV-LV Power Lines and White Light Emitting Diodes for Triple-Play Broadband Access Communications," IEC Comprehensive Report on Achieving the Triple Play: Technologies and Business Models for Success, ISBN 1-931695-51-2, pp. 167-178, January 2006. See publication here Archived 2016-03-04 at the Wayback Machine
"500 Megabits/Second with White LED Light" (Press release). Siemens. January 18, 2010. Archived from the original on September 29, 2012. Retrieved June 21, 2012.
"St. Cloud first to sign on for new technology" (Press release). St. Cloud Times. Nov 19, 2010.
"Wireless data from every light bulb". 2 August 2011.
"LED and Visible Light Communications Could be Key to Unlocking $5 Billion Indoor Location Market". www.abiresearch.com.
Yoshino, M.; Haruyama, S.; Nakagawa, M.; "High-accuracy positioning system using visible LED lights and image sensor," Radio and Wireless Symposium, 2008 IEEE, vol., no., pp.439-442, 22-24 Jan. 2008.
"Light positioning system using digital pulse recognition".
Yoshino, Masaki; Haruyama, Shinichiro; Nakagawa, Masao (1 January 2008). "High-accuracy positioning system using visible LED lights and image sensor". 2008 IEEE Radio and Wireless Symposium. pp. 439–442. doi:10.1109/RWS.2008.4463523. ISBN 978-1-4244-1462-8. S2CID 1023383 – via IEEE Xplore.
S. Horikawa, T. Komine, S. Haruyama and M. Nakagawa,”Pervasive Visible Light Positioning System using White LED Lighting”, IEICE, CAS2003-142, 2003.
Zhang, W.; Kavehrad, M. (2012). "A 2-D indoor localization system based on visible light LED". 2012 IEEE Photonics Society Summer Topical Meeting Series. pp. 80–81. doi:10.1109/PHOSST.2012.6280711. ISBN 978-1-4577-1527-3. S2CID 10835473.
Lee, Yong Up; Kavehrad, Mohsen (2012). "Long-range indoor hybrid localization system design with visible light communications and wireless network". 2012 IEEE Photonics Society Summer Topical Meeting Series. pp. 82–83. doi:10.1109/PHOSST.2012.6280712. ISBN 978-1-4577-1527-3. S2CID 43879184.
Panta, K.; Armstrong, J. (2012). "Indoor localisation using white LEDs". Electronics Letters. 48 (4): 228. Bibcode:2012ElL....48..228P. doi:10.1049/el.2011.3759.
Kim, Hyun-Seung; Kim, Deok-Rae; Yang, Se-Hoon; Son, Yong-Hwan; Han, Sang-Kook (2011). "Indoor positioning system based on carrier allocation visible light communication". 2011 International Quantum Electronics Conference (IQEC) and Conference on Lasers and Electro-Optics (CLEO) Pacific Rim incorporating the Australasian Conference on Optics, Lasers and Spectroscopy and the Australian Conference on Optical Fibre Technology. pp. 787–789. doi:10.1109/IQEC-CLEO.2011.6193741. ISBN 978-0-9775657-8-8. S2CID 23878390.
Giustiniano, Domenico; Tippenhauer, Nils Ole; Mangold, Stefan (2012). "Low-complexity Visible Light Networking with LED-to-LED communication". 2012 IFIP Wireless Days. pp. 1–8. doi:10.1109/WD.2012.6402861. ISBN 978-1-4673-4404-3. S2CID 14931354.
Xin Huang; Bangdao Chen; A.W. Roscoe; "Multi−Channel Key Distribution Protocols Using Visible Light Communications in Body Sensor Networks", Computer Science Student Conference 2012, (pp. 15), Nov. 2012., See publication here
Huang, X.; Guo, S.; Chen, B.; Roscoe, A. W. (2012). Bootstrapping body sensor networks using human controlled LED-camera channels. pp. 433–438. ISBN 978-1-4673-5325-0.
Haigh, Paul Anthony; Bausi, Francesco; Ghassemlooy, Zabih; Papakonstantinou, Ioannis; Le Minh, Hoa; Fléchon, Charlotte; Cacialli, Franco (2014). "Visible light communications: Real time 10 Mb/S link with a low bandwidth polymer light-emitting diode". Optics Express. 22 (3): 2830–8. Bibcode:2014OExpr..22.2830H. doi:10.1364/OE.22.002830. PMID 24663574.
Axrtek MOMO Axrtek, Inc.
"Where are the discounts? Carrefour's LED supermarket lighting from Philips will guide you" (Press release). Philips. May 21, 2015.
Chen, Guojing (June 28, 2015). "Commercial banks eye mobile payment innovations". China Economic Net. Archived from the original on October 3, 2018.
"Two more indoor positioning projects sprout in European supermarkets". www.ledsmagazine.com. 2017-03-08.
"Favendo collaborates with Philips Lighting" (PDF).
"Visible Light Communication". www.ntu.edu.sg. Retrieved 2015-12-24.
Bodrenko, A.I. (2018). "New Wireless Technology Not Covered by the Existing IEEE Standards of 2017". International Research Journal. 4 (70). doi:10.23670/IRJ.2018.70.022.
^ Rodríguez, Juan; Lamar, Diego G.; Aller, Daniel G.; Miaja, Pablo F.; Sebastián, Javier (April 2018). "Efficient Visible Light Communication Transmitters Based on Switching-Mode dc-dc Converters". Sensors. 18 (4): 1127. Bibcode:2018Senso..18.1127R. doi:10.3390/s18041127. PMC 5948605. PMID 29642455.
Sebastian, Javier; Lamar, Diego G.; Aller, Daniel G.; Rodriguez, Juan; Miaja, Pablo F. (September 2018). "On the Role of Power Electronics in Visible Light Communication". IEEE Journal of Emerging and Selected Topics in Power Electronics. 6 (3): 1210–1223. doi:10.1109/JESTPE.2018.2830878. hdl:10651/46845. ISSN 2168-6777. S2CID 19092607.
Rodreguez, Juan; Lamar, Diego G.; Aller, Daniel G.; Miaja, Pablo F.; Sebastian, Javier (June 2018). "Power-Efficient VLC Transmitter Able to Reproduce Multi-Carrier Modulation Schemes by Using the Output Voltage Ripple of the HB-LED Driver". 2018 IEEE 19th Workshop on Control and Modeling for Power Electronics (COMPEL). Padua: IEEE. pp. 1–8. doi:10.1109/COMPEL.2018.8460175. hdl:10651/48039. ISBN 978-1-5386-5541-2. S2CID 52289901.
Aziz, Amena Ejaz; Wong, Kainam Thomas; Chen, Jung-Chieh (2017). "Color-Shift Keying—How itItsargest Obtainable "Minimum Distance" Depends on its Preset Operating Chromaticity and Constellation Size". Journal of Lightwave Technology. 35 (13): 2724–2733. Bibcode:2017JLwT...35.2724A. doi:10.1109/JLT.2017.2693363. hdl:10397/76267. S2CID 13698944.

External links

IEEE 802.15 WPAN Task Group 7 (TG7) Visible Light Communication

v t e Optical telecommunication
Basic	Smoke signal Beacon Hydraulic telegraph Ships' flags Optical telegraph Heliograph Signal lamp Photophone
Advanced	Fiber-optics Optical fiber Cable Connectors Optical wireless Free-space Visible light Li-Fi In space Consumer IR Optical Transport Network
Technologies	OC Rates Intensity modulation Modulating retro-reflector
Category Portal

v t e Telecommunications
History	Beacon Broadcasting Cable protection system Cable TV Communications satellite Computer network Data compression audio DCT image video Digital media Internet video online video platform social media streaming Drums Edholm's law Electrical telegraph Fax Heliographs Hydraulic telegraph Information Age Information revolution Internet Mass media Mobile phone Smartphone Optical telecommunication Optical telegraphy Pager Photophone Prepaid mobile phone Radio Radiotelephone Satellite communications Semaphore Phryctoria Semiconductor device MOSFET transistor Smoke signals Telecommunications history Telautograph Telegraphy Teleprinter (teletype) Telephone The Telephone Cases Television digital streaming Undersea telegraph line Videotelephony Whistled language Wireless revolution
Pioneers	Nasir Ahmed Edwin Howard Armstrong Mohamed M. Atalla John Logie Baird Paul Baran John Bardeen Alexander Graham Bell Emile Berliner Tim Berners-Lee Francis Blake Jagadish Chandra Bose Charles Bourseul Walter Houser Brattain Vint Cerf Claude Chappe Yogen Dalal Daniel Davis Jr. Donald Davies Amos Dolbear Thomas Edison Lee de Forest Philo Farnsworth Reginald Fessenden Elisha Gray Oliver Heaviside Robert Hooke Erna Schneider Hoover Harold Hopkins Gardiner Greene Hubbard Internet pioneers Bob Kahn Dawon Kahng Charles K. Kao Narinder Singh Kapany Hedy Lamarr Roberto Landell de Moura Innocenzo Manzetti Guglielmo Marconi Robert Metcalfe Antonio Meucci Samuel Morse Jun-ichi Nishizawa Charles Grafton Page Radia Perlman Alexander Stepanovich Popov Tivadar Puskás Johann Philipp Reis Claude Shannon Almon Brown Strowger Henry Sutton Charles Sumner Tainter Nikola Tesla Camille Tissot Alfred Vail Thomas A. Watson Charles Wheatstone Vladimir K. Zworykin
Transmission media	Coaxial cable Fiber-optic communication optical fiber Free-space optical communication Molecular communication Radio waves wireless Transmission line telecommunication circuit
Network topology and switching	Bandwidth Links Nodes terminal Network switching circuit packet Telephone exchange
Multiplexing	Space-division Frequency-division Time-division Polarization-division Orbital angular-momentum Code-division
Concepts	Communication protocol Computer network Data transmission Store and forward Telecommunications equipment
Types of network	Cellular network Ethernet ISDN LAN Mobile NGN Public Switched Telephone Radio Television Telex UUCP WAN Wireless network
Notable networks	ARPANET BITNET CYCLADES FidoNet Internet Internet2 JANET NPL network Toasternet Usenet
Locations	Africa Americas North South Antarctica Asia Europe Oceania (Global telecommunications regulation bodies)
Telecommunication portal Category Outline Commons