Misplaced Pages

Winterbrook Bridge

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

Bridge in Wallingford
Winterbrook Bridge
Winterbrook Bridge from upstream
Coordinates51°35′18.5″N 1°07′24.5″W / 51.588472°N 1.123472°W / 51.588472; -1.123472
CarriesA4130 road
CrossesRiver Thames
LocaleWallingford
Maintained byOxfordshire County Council
Characteristics
MaterialConcrete and steel
Total length55 metres (180 ft)
Height15 feet 9 inches (4.80 m)
No. of spans3
History
Opened1993
Location
Winterbrook Bridge from the side

Winterbrook Bridge, also known as Wallingford By-pass Bridge, was built in 1993 as part of a by-pass around Wallingford, Oxfordshire, relieving the single-lane Wallingford Bridge. It forms part of the A4130, connecting Winterbrook, at the north end of Cholsey, just south of Wallingford, on the west bank to Mongewell on the east bank. It crosses the Thames on the reach between Cleeve Lock and Benson Lock. The 55-metre (180 ft) three-span bridge is built of steel plate girders with a reinforced concrete deck slab and glass fibre reinforced plastic cladding on the underside.

During the construction, the remains of a late Bronze Age settlement on a former eyot were investigated on the west bank of the Thames. The bridge was designed so as not to disturb the archaeological site. Close to the east bank, near Mongewell, the construction work allowed examination of the South Oxfordshire Grim's Ditch, the long earthwork followed by the Ridgeway Path, and showed it to be late Iron Age/early Roman.

See also

Notes

  1. River Thames Alliance. Bridge heights on the River Thames.
  2. Peshkam & Banks, 1996
  3. Cromarty et al. (2005)

References

External links

Next bridge upstream River Thames Next bridge downstream
Wallingford Bridge Winterbrook Bridge Moulsford Railway Bridge
Categories: