Woodbend Group | |
---|---|
Stratigraphic range: Frasnian PreꞒ Ꞓ O S D C P T J K Pg N | |
Type | Geological group |
Sub-units | Cooking Lake Formation Duvernay Formation Leduc Formation Ireton Formation |
Underlies | Winterburn Group |
Overlies | Beaverhill Lake Group |
Thickness | up to 700 metres (2,300 ft) |
Lithology | |
Primary | Limestone, dolomite |
Other | Shale |
Location | |
Coordinates | 53°20′42″N 113°41′42″W / 53.34507°N 113.6949°W / 53.34507; -113.6949 (Woodbend Group) |
Region | Alberta British Columbia Saskatchewan Manitoba Northwest Territories Yukon |
Country | Canada |
Type section | |
Named by | Imperial Oil |
Year defined | 1950 |
The Woodbend Group is a stratigraphical unit of Frasnian age in the Western Canadian Sedimentary Basin.
It was first described in the British American Pyrcz No. 1 well by Imperial Oil geological staff in 1950.
Lithology
The Formation is composed of crystalline and dolomitized limestone (Cooking Lake Formation) in off-reef areas, bituminous shale and argillaceous limestone, detrital limestone (reef fallout), stromatoporoid calcarenite (Duvernay Formation), gray shale, argillaceous limestone, argillaceous dolomite, crystalline dolomite (Ireton Formation). In reef build-ups, it consists of massive limestone and dolomite with porosity (Leduc Formation).
Hydrocarbon production
Oil is produced from the Leduc Formation in central Alberta since the early 1950s. Shale gas and liquids are extracted from the Duvernay Formation using horizontal drilling and multi-stage hydraulic fracturing. Several project test the economic viability of extracting bitumen from the Grosmont Formation.
Distribution
The Woodbend Group reaches a maximum thickness of 700 metres (2,300 ft) in northern Alberta (where reefs were developed), and has typical thickness of 300 metres (980 ft) in southern and central Alberta. It extends laterally from north-eastern British Columbia through Alberta and into southern Saskatchewan and southern Manitoba. Reef build-ups range in size from small mounds to pinnacle reefs and large atoll size reefs and bank developments.
Subdivisions
- Central Alberta
In central Alberta the following formations are recognized, from top to bottom:
Sub-unit | Age | Lithology | Max. Thickness |
Reference |
---|---|---|---|---|
Ireton Formation | Frasnian | upper: calcareous shale and argillaceous limestone middle: fissile grey-green shale with calcirudite beds lower: massive and banded limestone with shale partings |
250 m (820 ft) | |
Leduc Formation | Frasnian | shallow water reef deposits: Stromatoporoid limestone, skeletal mudstone, boundstone, floatstone, packstone and wackestone, mostly dolomitized | 300 m (980 ft) | |
Duvernay Formation | Frasnian | bituminous shale, calcareous shale, argillaceous limestone with disseminated pyrite | 250 m (820 ft) | |
Cooking Lake Formation | Frasnian | limestone (dolomite in the Rimbey-Meadowbrook reef trend) | 90 m (300 ft) |
- Northeast Alberta
In northeast Alberta the following formations are recognized, from top to bottom:
Sub-unit | Age | Lithology | Max. Thickness |
Reference |
---|---|---|---|---|
Grosmont Formation | Frasnian | limestone and dolomite, minor argillaceous dolomite, limestone, siltstone and shale | 230 m (750 ft) | |
Ireton Formation | Frasnian | upper: calcareous shale and argillaceous limestone middle: fissile grey-green shale with calcirudite beds lower: massive and banded limestone with shale partings |
250 m (820 ft) | |
Cooking Lake Formation | Frasnian | limestone: fossiliferous mudstone and wackestone, grainstone, stromatoporoid rudstone and floatstone | 90 m (300 ft) |
Relationship to other units
The Woodbend Group is conformably overlain by the Winterburn Group and conformably overlays the Beaverhill Lake Group. It is transgressive in the Peace River Arch and Tathlina uplift. Newer deposits rest on the Woodbend group upon an erosional surface in eastern Alberta, south-central Saskatchewan and Manitoba.
It is equivalent to the Birdbear Formation and Duperow Formation in northern Montana, southern Saskatchewan and southwestern Manitoba, as well as parts of the Fort Simpson Formation and Muskwa Formation of northeastern British Columbia and southern Yukon, while it corresponds to the Tathlina Formation, Twin Falls Formation and Hay River Formation in the Northwest Territories.
References
- ^ Lexicon of Canadian Geologic Units. "Woodbend Group". Retrieved 2009-03-01.
- Imperial Oil Limited, Geological Staff, Western Division, 1950. Devonian nomenclature in Edmonton area, Alberta, Canada. Bull. American Association of Petroleum Geologists, v. 34, p. 1807-1825
- "The Duvernay Shale". Retrieved 2012-03-04.
- ^ Lexicon of Canadian Geologic Units. "Ireton Formation". Retrieved 2009-12-27.
- Lexicon of Canadian Geologic Units. "Leduc Formation". Retrieved 2009-12-27.
- Lexicon of Canadian Geologic Units. "Duvernay Formation". Retrieved 2009-12-27.
- ^ Lexicon of Canadian Geologic Units. "Cooking Lake Formation". Retrieved 2009-12-27.
- Lexicon of Canadian Geologic Units. "Grosmont Formation". Retrieved 2011-06-25.
- Devonian Alberta
- Devonian British Columbia
- Devonian Saskatchewan
- Devonian Manitoba
- Devonian Northwest Territories
- Western Canadian Sedimentary Basin
- Devonian System of North America
- Geologic groups of Alberta
- Geologic groups of British Columbia
- Geologic groups of Saskatchewan
- Geologic groups of Manitoba
- Geologic groups of the Northwest Territories
- Devonian southern paleotropical deposits
- Frasnian Stage
- Geologic groups of Yukon