Misplaced Pages

Cable tie

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from Zip ties) Ratcheting fastener for electrical cable "Cable Ties" redirects here. For the Australian band, see Cable Ties (band).
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Cable tie" – news · newspapers · books · scholar · JSTOR (November 2023) (Learn how and when to remove this message)
Assortment of cable ties

A cable tie (also known as a hose tie, panduit, tie wrap, wire tie, zap-straps, or zip tie) is a type of fastener for holding items together, primarily electrical cables and wires. Because of their low cost, ease of use, and binding strength, cable ties are ubiquitous, finding use in a wide range of other applications. Cable ties were first manufactured by Thomas & Betts under the brand name Ty-Rap.

The common cable tie, normally made of nylon, has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet so that as the free end of the tape section is pulled the cable tie tightens and does not come undone. When the mouthpiece is inserted through the grooves and pulled tight, it creates a secure, adjustable loop, which locks in place like a knot. Some ties include a tab that can be depressed to release the ratchet so that the tie can be loosened or removed, and possibly reused. Stainless steel versions, some coated with a rugged plastic, cater for exterior applications and hazardous environments.

Design and use

The ratchet mechanism on the head of a cable tie
Cable ties used to attach shade cloth to scaffolding at a construction site in Singapore

The most common cable tie consists of a flexible nylon tape with an integrated linear ratchet gear rack, and on one end a pawl within a small open case. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back unless a large amount of force is applied; the resulting loop may only be pulled tighter. This allows several cables to be bound together into a cable bundle and/or to form a cable tree.

A cable tie tensioning device or tool may be used to apply a cable tie with a specific degree of tension. The tool may cut off the extra tail flush with the head in order to avoid a sharp edge which might otherwise cause injury. Light-duty tools are operated by squeezing the handle with the fingers, while heavy-duty versions can be powered by compressed air or a solenoid, to prevent repetitive strain injury.

In order to increase resistance to ultraviolet light in outdoor applications, nylon containing a minimum of 2% carbon black is used to protect the polymer chains and extend the cable tie's service life. Blue cable ties are supplied to the food industry and contain a metal additive so they can be detected by industrial metal detectors. Cable ties made of ETFE (Tefzel) are used in radiation-rich environments. Red cable ties made of ECTFE (Halar) are used for plenum cabling.

Stainless steel cable ties are also available for flameproof applications—coated stainless ties are available to prevent galvanic attack from dissimilar metals (e.g. zinc-coated cable tray).

Plastic handcuffs are based on the cable tie design and are used by law enforcement to restrain prisoners. Cable ties are also sometimes used to prevent hubcaps (also known as wheel trims) from falling off a moving vehicle, and some are sold specifically for this purpose. The use of cable ties in medicolegal cases is infrequent, being involved in situations of neck compression or restraint.

History

Cable ties were invented by Thomas & Betts, an electrical company, in 1958 under the brand name Ty-Rap. Initially they were designed for airplane wire harnesses. The original design used a metal tooth, and these can still be obtained. Manufacturers later changed to the nylon/plastic design.

Over the years the design has been extended and developed into numerous spin-off products. One example was a self-locking loop developed as an alternative to purse-string suture in colon anastomosis.

Ty-Rap cable tie inventor, Maurus C. Logan, worked for Thomas & Betts and finished his career with the company as Vice President of Research and Development. During his tenure at Thomas & Betts, he contributed to the development and marketing of many successful Thomas & Betts products. Logan died on 12 November 2007, at the age of 86.

The idea of the cable tie came to Logan while touring a Boeing aircraft manufacturing facility in 1956. Aircraft wiring was a cumbersome and detailed undertaking, involving thousands of feet of wire organized on sheets of 50-foot-long plywood and held in place with knotted, wax-coated, braided nylon cord. Each knot had to be pulled tight by wrapping the cord around one's finger which sometimes cut the operator's fingers until they developed thick calluses. Logan was convinced there had to be an easier, more forgiving, way to accomplish this critical task.

For the next couple of years, Logan experimented with various tools and materials. On June 24, 1958, a patent for the Ty-Rap cable tie was submitted.

Reuse

Cable ties are generally designed as single-use devices, however they can be reopened with little or no damage by inserting a small flat object between the ratchet and the pawl, and pulling the pawl out. Some models have a mechanism to release the pawl and allow re-use. Alternatively, the tie can be twisted 180 degrees and inserted into the case upside down to create a weaker loop that can be easily opened by hand, but still strong enough for certain simple tasks, such as holding several cables together.

Speciality types

A cable tie with an in-built security tag
Beaded
Beaded design allows them to be releasable and reusable
Releasable
Reusable cable ties with a releasable ratchet
Ladder style
For intermediate bundling and retail applications
Identification
Built-in flags for written or printed identification
Parallel entry
Tamper-proof, low profile heads
Tear-off
Quick release design requires no cutting tools
Pull-tight seals
Tamper-evident seals
Steggel
Heavy duty, multipurpose ties

Alternatives

Other methods of bundling cable together securely and semi-permanently include cable lacing, strapping, binding knots such as the surgeon's knot or constrictor knot, Velcro brand hook-and-loop strips, conveyor belt hooks, twist ties, Rapstrap fasteners, or metal buckle.

See also

References

  1. "Cable Bundling Straps and Tools". Panduit.
  2. ^ "Stainless steel cable ties" (PDF). Thomas & Betts.
  3. Dodds, Chris on (15 November 2013). "Detectable Cable Ties for Food Industry". cablejoints.co.uk. Retrieved 14 July 2017.
  4. Meissner, Craig (December 1, 2002). "Ties That Bind". Police Magazine.
  5. Grecia, Leandre (March 21, 2020). "Why do people put zip ties on hub caps?". www.topgear.com.ph. Archived from the original on 2021-03-15. Retrieved 2021-04-28.
  6. Byard, Roger W (22 February 2024). "Cable ties in forensic practice". Medicine, Science and the Law. doi:10.1177/00258024241233464.
  7. See the Thomas and Betts official website. Archived November 4, 2013, at the Wayback Machine
  8. Höglund, Odd V.; Maxon, Oskar; Grönberg, Anders (8 February 2017). "A self-locking loop as an alternative to purse-string suture in colon anastomosis: a feasibility study". BMC Research Notes. 10 (1): 89. doi:10.1186/s13104-017-2412-4. PMC 5299739. PMID 28179015.
  9. "Maurus C. Logan Obituary". Legacy.com. 13 November 2007.
  10. Maurus C. Logan, "Cable bundling and supporting strap",U.S. patent 3,022,557, filed 24 June 1958, issued 27 February 1962.

External links

Categories: