| Revision as of 03:45, 29 November 2008 editShrampes (talk | contribs)111 edits →Health and safety: source added← Previous edit | Revision as of 03:47, 29 November 2008 edit undoShrampes (talk | contribs)111 edits →Health and safety: formatNext edit → | ||
| Line 58: | Line 58: | ||
| ==Health and safety== | ==Health and safety== | ||
| Like many ], tetrachloroethene is a ] depressant, and inhaling its vapors (particularly in closed, poorly ventilated areas) can cause dizziness, ], sleepiness, confusion, ], difficulty in speaking and walking, unconsciousness, and death.<ref></ref> | Like many ], tetrachloroethene is a ] depressant, and inhaling its vapors (particularly in closed, poorly ventilated areas) can cause dizziness, ], sleepiness, confusion, ], difficulty in speaking and walking, unconsciousness, and death.<ref></ref> | ||
| After repeated or extended skin contact, tetrachloroethene may dissolve fats from the skin, resulting in severe skin irritation in work environments where people have been exposed to high concentrations. | After repeated or extended skin contact, tetrachloroethene may dissolve fats from the skin, resulting in severe skin irritation in work environments where people have been exposed to high concentrations. | ||
Revision as of 03:47, 29 November 2008
Tetrachloroethylene, also known under its systematic name tetrachloroethene and as perchloroethylene, perchloroethene, perc, and PCE, is a chlorocarbon with the formula Cl2C=CCl2. It is a colourless liquid widely used for dry cleaning of fabrics, hence it is sometimes called "dry-cleaning fluid." It has a sweet odor detectable by most people at a concentration of 1 part per million (1 ppm). Worldwide production was about 1 megatons in 1985.
Production
Michael Faraday first synthesized tetrachloroethene in 1821 by thermal decomposition of hexachloroethane into tetrachloroethene and chlorine. Most tetrachloroethene is produced by high temperature chlorinolysis of light hydrocarbons. The method is related to Faraday's discovery since hexachloroethane is generated and thermally decomposes. Side products include carbon tetrachloride, hydrogen chloride, and hexachlorobutadiene.
Several other methods have been developed. When 1,2-dichloroethane is heated to 400 °C with chlorine, tetrachloroethene is produced by the chemical reaction:
- ClCH2CH2Cl + 3 Cl2 → Cl2C=CCl2 + 4 HCl
This reaction can be catalyzed by a mixture of potassium chloride and aluminium chloride, or by activated carbon. Trichloroethylene is a major byproduct of the reaction, and since both are salable commercial chemicals, typical industrial practice is to collect both products and then separate them by distillation.
Uses
Most tetrachloroethylene is consumed as a solvent used in dry cleaning. It is desirable because it dissolves many organic materials, it is volatile, highly stable, and nonflammable. Usually as a mixture with other chlorocarbons, it is also used to degrease metal parts in the automotive and other metalworking industries. It appears in a few consumer products including paint strippers and spot removers.
It is used as a solvent for proton NMR scans.
Historical applications
Tetrachloroethene was also extensively used as an intermediate in the manufacture of HFC-134a and related refrigerants. In the early 20th century, tetrachloroethene was the most effective available treatment for hookworm.
Health and safety
Like many chlorinated hydrocarbons, tetrachloroethene is a central nervous system depressant, and inhaling its vapors (particularly in closed, poorly ventilated areas) can cause dizziness, headache, sleepiness, confusion, nausea, difficulty in speaking and walking, unconsciousness, and death.
After repeated or extended skin contact, tetrachloroethene may dissolve fats from the skin, resulting in severe skin irritation in work environments where people have been exposed to high concentrations.
Tetrachloroethene is a common soil contaminant. Such contamination most often results from spillage, overfilling, sewer leakage, or the illegal disposal into UIC wells (e.g. septic systems, drywells) at commercial dry cleaning facilities. Because of the mobility of PCE in groundwater, its toxicity at low levels, and its density (which causes it to sink below the water table), cleanup activities tend to be especially problematic compared to cleanups of oil spills.
In industry, most workers are exposed to levels lower than those causing obvious nervous system effects. The health effects of tetrachloroethene at levels typically encountered in occupational or environmental exposures have not been well established.
Results from some studies suggest that women who work in dry cleaning industries where exposures to tetrachloroethene can be high may have more menstrual problems and spontaneous abortions than women who are not exposed. However, it is not known if tetrachloroethene was responsible for these problems because other possible causes were not considered.
Results of animal studies, conducted with amounts much higher than those that most people are exposed to, show that tetrachloroethene can cause liver and kidney damage. Exposure to very high levels of tetrachloroethene can be toxic to the unborn pups of pregnant rats and mice. Changes in behavior were observed in the offspring of rats that breathed high levels of the chemical while they were pregnant.
The International Agency for Research on Cancer has classified tetrachloroethene as a Group 2A carcinogen, which means that it is probably carcinogenic to humans.
Under a high temperature flame such as those produced by a TIG torch or other welding arcs, phosgene gas is produced.
Testing for exposure
One method of testing for tetrachloroethene exposure is to measure the amount of the chemical in the breath, much the same way breath-alcohol measurements are used to determine the amount of alcohol in the blood. Because it is stored in the body's fat and slowly released into the bloodstream, tetrachloroethene can be detected in the breath for weeks following a heavy exposure.
Tetrachloroethene and trichloroacetic acid (TCA), a breakdown product of tetrachloroethene, can be detected in the blood. These tests are relatively simple to perform. These tests are not available at most doctors' offices, but can be performed at laboratories with the necessary equipment. Because exposure to other chemicals can produce the same breakdown products in the urine and blood, the tests for breakdown products cannot determine if one has been exposed to tetrachloroethene or the other chemicals.
References
- ^ M. Rossberg et al. “Chlorinated Hydrocarbons” in Ullmann’s Encyclopedia of Industrial Chemistry 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06 233.pub2
- Chemicals In The Environment: Perchloroethylene (Cas No. 127-18-4),U.S. Environmental Protection Agency, August 1994
- IARC monograph. "Tetrachloroethylene" Vol. 63, p. 159. Last Updated May 20, 1997. Last retrieved June 22, 2007.
Further reading
- "Toxicological Profile for Tetrachloroethene". Agency for Toxic Substances and Disease Registry. 1997.
- Doherty, R.E. (2000). "A History of the Production and Use of Carbon Tetrachloride, Tetrachloroethylene, Trichloroethylene and 1,1,1-Trichloroethane in the United States: Part 1 - Historical Background; Carbon Tetrachloride and Tetrachloroethylene". Journal of Environmental Forensics. 1: 69–81. doi:10.1006/enfo.2000.0010.
External links
- ATSDR Case Studies in Environmental Medicine: Tetrachloroethylene Toxicity U.S. Department of Health and Human Services
- Australian National Pollutant Inventory (NPI) page
- "Toxic Fumes May Have Made Gunman Snap", by Julian Kesner, New York Daily News, April 20, 2007.