Misplaced Pages

Plutonium-238

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

This is an old revision of this page, as edited by Tarl N. (talk | contribs) at 06:38, 30 June 2018 (Reverted 1 edit by 160.3.13.88 (talk): Vandalism. (TW)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Revision as of 06:38, 30 June 2018 by Tarl N. (talk | contribs) (Reverted 1 edit by 160.3.13.88 (talk): Vandalism. (TW))(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Plutonium-238, Pu
Plutonium-238 oxide pellet glowing from its self-heating
General
SymbolPu
Namesplutonium-238, 238Pu, Pu-238
Protons (Z)94
Neutrons (N)144
Nuclide data
Half-life (t1/2)87.7 years
Isotope mass238.049553 Da
Spin0
Parent isotopesCm (α)
Np (β)
Am (β)
Decay productsU
Decay modes
Decay modeDecay energy (MeV)
Alpha decay5.593
Isotopes of plutonium
Complete table of nuclides

Plutonium-238 (also known as Pu-238 or Pu) is a radioactive isotope of plutonium that has a half-life of 87.7 years.

Plutonium-238 is a very powerful alpha emitter. This makes the plutonium-238 isotope suitable for usage in radioisotope thermoelectric generators (RTGs) and radioisotope heater units. The density of plutonium-238 is 19.329 g/cm.

Heat

One gram of Pu corresponds to 1/238 moles, which is 2.53×10 plutonium atoms. Considering its half-life t1/2 = 87.7 years, its activity is

A = λ N = ln 2 t 1 / 2 N = 634 GBq {\displaystyle A=\lambda N={\frac {\ln 2}{t_{1/2}}}N=634\,{\mbox{GBq}}} .

A is the number of Pu decays per second per gram (634 billion). Each of the emitted alpha particles has kinetic energy 5.593 MeV or 8.96×10 J which is quickly converted to heat when the particle decelerates in the material. Therefore each gram of Pu spontaneously generates 0.568 W of heat.

History

Initial production

Plutonium-238 was the first isotope of plutonium to be discovered. It was synthesized by Glenn Seaborg and associates in December, 1940 by bombarding uranium-238 with deuterons, creating neptunium-238, which then decays to form plutonium-238. Plutonium-238 decays to uranium-234 and then further along the radium series to lead-206. Plutonium-238 was produced by irradiating neptunium-237 (half life 2.144M years), which is a by-product of the production of plutonium-239 weapons-grade material. As produced by Savannah River in their weapons reactor, shut down in 1988, plutonium-238 was mixed with about 16% plutonium-239.

The first application was its use in a weapons component made at Mound for the Weapons Design Agency Lawrence Livermore Laboratory (LLL). Mound was chosen for this work because of its experience in producing the polonium-210 fueled Urchin initiator and its work with several heavy elements in a Reactor Fuels program. Two Mound scientists spent 1959 at LLL in joint development while the Special Metallurgical Building was constructed at Mound to house the project. Meanwhile the first sample of plutonium-238 came to Mound in 1959.

The weapons project was planned for about 1 kg/year of Pu-238 over a 3-year period. But the Pu-238 component could not be produced to the specifications despite a 2 year effort beginning at Mound in mid-1961. A maximum effort was undertaken with 3 shifts a day, 6 days a week and ramp-up of Savannah River's Pu-238 production over a 3 year period to about 20 kg/year. A loosening of the specifications resulted in productivity of about 3%, and production finally began in 1964.

Use as Radioisotope Thermoelectric Generator

Beginning on January 1, 1957, Mound RTG inventors Jordan & Birden were working on an Army Signal Corps contract (R-65-8- 998 11-SC-03-91) to conduct research on radioactive materials and thermocouples suitable for the direct conversion of heat to electrical energy using Polonium-210 as the heat source.

Capt. R. T. Carpenter had chosen Pu-238 as the fuel for the first RTG to be launched into space as auxiliary power for the Transit IV Navy navigational satellite, June 29, 1961. As of January 21, 1963, the decision had yet to be made as to what isotope would be used to fuel the large RTGs for NASA programs.

Then early in 1964 Mound scientists developed a different method of fabricating the weapon component that resulted in a production efficiency of around 98%. This made available the excess Savannah River Pu-238 production for Space Electric Power use just in time to meet the needs of the SNAP-27 RTG on the moon, the Pioneer spacecraft, the Viking Mars Landers, more Transit Navy navigation satellites (precursor to today's GPS) and Voyager spacecraft, for which all of the Pu-238 heat sources were fabricated at Mound.

See the revised table from "RTG: A Source of Power; A History of the Radioisotopic Thermoelectric Generators Fueled at Mound"

The Radioisotope Heater Units were used in space exploration beginning with the Apollo Radioisotope Heaters (ALRH) warming the Seismic Experiment placed on the Moon in the first landing (Apollo 11) through their use on Moon & Mars rovers to the 120 LWRHU's heating the experiments on the Galileo spacecraft.

With Plutonium-238 becoming available for non-military uses, numerous applications were proposed and tested, including the Cardiac Pacemaker program that began on June 1, 1966, in conjunction with NUMEC. When it was recognized that the heat source would not remain intact through cremation, the program was cancelled because 100% assurance could not be guaranteed that a cremation event would not occur.

An addition to the Special Metallurgical building weapon component production facility was completed at the end of 1964 for Pu-238 heat source fuel fabrication. A temporary fuel production facility was also installed in the Research Building in 1969 for Transit fuel fabrication. With completion of the weapons component project, the Special Metallurgical Building, nicknamed "Snake Mountain" because of the difficulties encountered in handling large quantities of Pu-238, ceased operations on June 30, 1968, with Pu-238 operations taken over by the new Plutonium Processing Building, especially designed and constructed for handling large quantities of Pu-238. Plutonium-238 is given the highest relative hazard number (152) of all 256 radionuclides evaluated by Karl Z. Morgan, et al, in 1963

Production

Reactor-grade plutonium from spent nuclear fuel contains various isotopes of plutonium. Pu-238 makes up only one or two percent, but it may be responsible for much of the short-term decay heat because of its short half-life relative to other plutonium isotopes. Reactor-grade plutonium is not useful for producing Pu-238 for RTGs because difficult isotopic separation would be needed.

Pure plutonium-238 is prepared by neutron irradiation of neptunium-237, one of the minor actinides that can be recovered from spent nuclear fuel during reprocessing, or by the neutron irradiation of americium in a reactor. In both cases, the targets are subjected to a chemical treatment, including dissolution in nitric acid to extract the plutonium-238. A 100 kg sample of light water reactor fuel that has been irradiated for three years contains only about 700 grams of neptunium-237, and the neptunium must be extracted selectively. Significant amounts of pure Pu-238 could also be produced in a thorium fuel cycle.

The United States Pu-238 inventory supports both NASA (civil space) and other national security applications. The Department of Energy maintains separate inventory accounts for the two categories. As of March 2015, a total of 35 kilograms (77 pounds) of Pu-238 was available for civil space uses. Out of the inventory, 1 kilogram (2.2 lb) remains in good enough condition to meet NASA specifications for power delivery; it is this pool of Pu-238 that will be used in a multi-mission radioisotope thermoelectric generator (MMRTG) for the 2020 Mars Rover mission and two additional MMRTGs for a notional 2024 NASA mission. 21 kilograms (46 lb) will remain after that, with approximately 4 kilograms (8.8 lb) just barely meeting the NASA specification. This 21 kilograms (46 lb) can be brought up to NASA specifications if it is blended with a smaller amount of newly produced Pu-238 having a higher energy density.

U.S. production ceases and resumes

The United States stopped producing bulk Pu-238 with the closure of the Savannah River Site reactors in 1988.

Since 1993, all of the Pu-238 used in American spacecraft has been purchased from Russia. In total, 16.5 kilograms (36 lb) has been purchased but Russia is no longer producing Pu-238 and their own supply is reportedly running low.

In February 2013, a small amount of Pu-238 was successfully produced by Oak Ridge's High Flux Isotope Reactor. On December 22, 2015, the Oak Ridge National Laboratory reported that its researchers had successfully produced 50 grams (1.8 ounces) of Pu-238.

After an analysis of this sample, production of 300 to 400 grams (11 to 14 oz) of the material per year is planned to begin and then, through automation and scale-up processes, the goal is to increase production to an average of 1.5 kg (3.3 lb) per year by 2015.

In March 2017, Ontario Power Generation (OPG) and its venture arm, Canadian Nuclear Partners, announced plans to produce Pu-238 as a second source for NASA. Rods containing Np-237 will be fabricated by Pacific Northwest National Laboratory (PNNL) in Washington State and shipped to OPG's Darlington Nuclear Generating Station in Clarington, Ontario, Canada where they will be irradiated with neutrons inside the reactor's core to produce Pu-238.

Applications

The main application of Pu-238 is as the heat source in radioisotope thermoelectric generators (RTGs). The RTG was invented in 1954 by Mound scientists Ken Jordan and John Birden, who were inducted into the National Inventors Hall of Fame in 2013. They immediately produced a working prototype using a Po heat source, and on January 1, 1957 entered into an Army Signal Corps contract (R-65-8- 998 11-SC-03-91) to conduct research on radioactive materials and thermocouples suitable for the direct conversion of heat to electrical energy using Polonium-210 as the heat source.

RTG technology was first developed by Los Alamos National Laboratory during the 1960s and 1970s to provide radioisotope thermoelectric generator power for cardiac pacemakers. Of the 250 plutonium-powered pacemakers Medtronic manufactured, twenty-two were still in service more than twenty-five years later, a feat that no battery-powered pacemaker could achieve.

This same RTG power technology has been used in spacecraft such as Pioneer 10 and 11, Voyager 1 and 2, Cassini–Huygens and New Horizons, and in other devices, such as the Mars Science Laboratory, for long-term nuclear power generation.

See also

References

  1. Rebuilding the supply of Pu-238. Oregon State University.
  2. US restarts production of plutonium-238 to power space missions. David Szondy, New Atlas. 23 December 2015.
  3. "Isqua Istari » The density of Plutonium". blog.hawkbats.com. Retrieved 2017-11-07.
  4. "MLM-CF-67-1-71 Plutonium 238 Oxide Shipment No. 33" (PDF). 1966-12-30.
  5. "Little Known Pu Stories" (PDF).
  6. G. R. Grove to D. L. Scot (1963-01-21). "Trip Report" (PDF).
  7. Carol Craig. "RTG: A Source of Power; A History of the Radioisotopic Thermoelectric Generators Fueled at Mound (MLM-MU-82-72-0006)" (PDF). Archived from the original (PDF) on 2016-08-16. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  8. https://web.archive.org/web/20160816084535/https://dl.dropboxusercontent.com/u/77675434/Heat%20Source%20Datasheets/CARDIAC%20PACEMAKER.pdf. Archived from the original (PDF) on 2016-08-16. {{cite web}}: Missing or empty |title= (help); Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  9. "Final Safety Analysis Report, January 15, 1975 (MLM-ENG-105)".
  10. Karl Z. Morgan; et al. (1964-03-01). "Health Physics Journal, Vol. 10, No. 3 - Relative Hazard of the Various Radioactive Materials". {{cite journal}}: Cite journal requires |journal= (help); Explicit use of et al. in: |author= (help)
  11. "Process for producing ultra-pure ... - Google Patents". Google.com. Retrieved 2011-09-19.
  12. http://www.thoriumenergyalliance.com/downloads/plutonium-238.pdf
  13. ^ Caponiti, Alice. "Space and Defense Power Systems Program Information Briefing" (PDF). Lunar and Planetary Institute. NASA. Retrieved 24 March 2015.
  14. Steven D. Howe; Douglas Crawford; Jorge Navarro; Terry Ring. "Economical Production of Pu - 238: Feasibility Study" (PDF). Center for Space Nuclear Research. Retrieved 2013-03-19.
  15. "Plutonium-238 Is Produced In America For The First Time In Almost 30 Years". Australian Popular Science. Retrieved 2017-03-01.
  16. "SRS - History Highlights". www.srs.gov. Retrieved 2017-11-30.
  17. "Commonly Asked Questions About Radioisotope Power Systems" (PDF). Idaho National Laboratory. July 2005. Archived from the original (PDF) on September 28, 2011. Retrieved 2011-10-24. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  18. "Plutonium-238 Production Project" (PDF). Department of Energy. 5 February 2011. Archived from the original (PDF) on February 3, 2012. Retrieved 2 July 2012. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  19. Clark, Stephen (20 March 2013). "U.S. laboratory produces first plutonium in 25 years". Spaceflightnow. Retrieved 21 March 2013.
  20. ^ Walli, Ron (22 December 2015). "ORNL achieves milestone with plutonium-238 sample". Oak Ridge National Laboratory. Retrieved 22 December 2015.
  21. Harvey, Chelsea (30 December 2015). "This is the fuel NASA needs to make it to the edge of the solar system - and beyond". The Washington Post. Retrieved 4 January 2016.
  22. Plutonium supply for NASA missions faces long-term challenges. Jeff Foust. Space News, October 10, 2017.
  23. United States to ship neptunium to Canada as part of Pu-238 production. International Panel on Fissile Materials. 5 March 2017.
  24. NASA Re-starts PU-238 Production at Two Sites, Neutron Bytes, March 5, 2017
  25. National Inventors Hall of Fame - John Birden.
  26. Kathy DeLucas; Jim Foxx; Robert Nance (January–March 2005). "From heat sources to heart sources: Los Alamos made material for plutonium-powered pumper". Actinide Research Quarterly. Los Alamos National Laboratory. Retrieved 2015-07-09.
  27. Alexandra Witze, Nuclear power: Desperately seeking plutonium, NASA has 35 kg of Pu to power its deep-space missions - but that will not get it very far., Nature, 25 Nov 2014

External links


Lighter:
plutonium-237
Plutonium-238 is an
isotope of plutonium
Heavier:
plutonium-239
Decay product of:
curium-242 (α)
americium-238 (β+)
neptunium-238 (β-)
uranium-238 (β-β-)
Decay chain
of plutonium-238
Decays to:
uranium-234 (α)
Categories: