Misplaced Pages

Magnetic 2D materials or magnetic van der Waals materials are two-dimensional materials that display ordered magnetic properties such as antiferromagnetism or ferromagnetism. After the discovery of graphene in 2004, the family of 2D materials has grown rapidly. There have since been reports of several related materials, all except for magnetic materials. But since 2016 there have been numerous reports of 2D magnetic materials that can be exfoliated with ease just like graphene.

The first few-layered van der Waals magnetism was reported in 2017 (Cr₂Ge₂Te₆, and CrI₃). One reason for this seemingly late discovery is that thermal fluctuations tend to destroy magnetic order for 2D magnets more easily compared to 3D bulk. It is also generally accepted in the community that low dimensional materials have different magnetic properties compared to bulk. This academic interest that transition from 3D to 2D magnetism can be measured has been the driving force behind much of the recent works on van der Waals magnets. Much anticipated transition of such has been since observed in both antiferromagnets and ferromagnets: FePS₃, Cr₂Ge₂Te₆, CrI₃, NiPS₃, MnPS₃, Fe₃GeTe₂

Although the field has been only around since 2016, it has become one of the most active fields in condensed matter physics and materials science and engineering. There have been several review articles written up to highlight its future and promise.

Overview

Magnetic van der Waals materials is a new addition to the growing list of 2d materials. The special feature of these new materials is that they exhibit a magnetic ground state, either antiferromagnetic or ferromagnetic, when they are thinned down to very few sheets or even one layer of materials. Another, probably more important, feature of these materials is that they can be easily produced in few layers or monolayer form using simple means such as scotch tape, which is rather uncommon among other magnetic materials like oxide magnets.

Interest in these materials is based on the possibility of producing two-dimensional magnetic materials with ease. The field started with a series of papers in 2016 with a conceptual paper and a first experimental demonstration. The field was expanded further with the publication of similar observations in ferromagnetism the following year. Since then, several new materials discovered and several review papers have been published.

Theory

Magnetic materials have their (spins) aligned over a macroscopic length scale. Alignment of the spins is typically driven by exchange interaction between neighboring spins. While at absolute zero (${\displaystyle T=0}$) the alignment can always exist, thermal fluctuations misalign magnetic moments at temperatures above the Curie temperature (${\displaystyle T_{C}}$), causing a phase transition to a non-magnetic state. Whether ${\displaystyle T_{C}}$ is above the absolute zero depends heavily on the dimensions of the system.

For a 3D system, the Curie temperature is always above zero, while a one-dimensional system can only be in a ferromagnetic state at ${\displaystyle T=0}$

For 2D systems, the transition temperature depends on the spin dimensionality (${\displaystyle n}$). In system with ${\displaystyle n=1}$, the planar spins can be oriented either in or out of plane. A spin dimensionality of two means that the spins are free to point in any direction parallel to the plane. A system with a spin dimensionality of three means there are no constraints on the direction of the spin. A system with ${\displaystyle n=1}$ is described by the 2D Ising model. Onsager's solution to the model demonstrates that ${\displaystyle T_{C}>0}$, thus allowing magnetism at obtainable temperatures. On the contrary, an infinite system where ${\displaystyle n=3}$, described by the isotropic Heisenberg model, does not display magnetism at any finite temperature. The long range ordering of the spins for an infinite system is prevented by the Mermin-Wagner theorem stating that spontaneous symmetry breaking required for magnetism is not possible in isotropic two dimensional magnetic systems. Spin waves in this case have finite density of states and are gapless and are therefore easy to excite, destroying magnetic order. Therefore, an external source of magnetocrystalline anisotropy, such as external magnetic field, or a finite-sized system is required for materials with ${\displaystyle n=3}$ to demonstrate magnetism.

The 2D ising model describes the behavior of FePS₃, CrI₃. and Fe₃GeTe₂, while Cr₂Ge₂Te₆ and MnPS₃ behaves like isotropic Heisenberg model. The intrinsic anisotropy in CrI₃ and Fe₃GeTe₂ is caused by strong spin–orbit coupling, allowing them to remain magnetic down to a monolayer, while Cr₂Ge₂Te₆ has only exhibit magnetism as a bilayer or thicker. The XY model describes the case where ${\displaystyle n=2}$. In this system, there is no transition between the ordered and unordered states, but instead the system undergoes a so-called Kosterlitz–Thouless transition at finite temperature ${\displaystyle T_{KT}}$, where at temperatures below ${\displaystyle T_{KT}}$ the system has quasi-long-range magnetic order. It was reported that the theoretical predictions of the XY model are consistent with those experimental observations of NiPS_3. The Heisenberg model describes the case where ${\displaystyle n=3}$. In this system, there is no transition between the ordered and unordered states because of the Mermin-Wagner theorem. The experimental realization of the Heisenberg model was reported using MnPS₃.

The above systems can be described by a generalized Heisenberg spin Hamiltonian:

${\displaystyle H=-{\frac {1}{2}}\sum _{<i,j>}(J\mathbf {S} _{i}\cdot \mathbf {S} _{j}+\Lambda S_{j}^{z}S_{i}^{z})-\sum _{i}A(S_{i}^{z})^{2}}$,

Where ${\displaystyle J}$ is the exchange coupling between spins ${\displaystyle \mathbf {S} _{i}}$ and ${\displaystyle \mathbf {S} _{j}}$, and ${\displaystyle A}$ and ${\displaystyle \Lambda }$ are on-site and inter-site magnetic anisotropies, respectively. Setting ${\displaystyle A\rightarrow \pm \infty }$ recovered the 2D Ising model and the XY model. (positive sign for ${\displaystyle n=1}$ and negative for ${\displaystyle n=2}$), while ${\displaystyle A\approx 0}$ and ${\displaystyle \Lambda \approx 0}$ recovers the Heisenberg model (${\displaystyle n=3}$). Along with the idealized models described above, the spin Hamiltonian can be used for most experimental setups, and it can also model dipole-dipole interactions by renormalization of the parameter ${\displaystyle A}$. However, sometimes including further neighbours or using different exchange coupling, such as antisymmetric exchange, is required.

Measuring two-dimensional magnetism

Magnetic properties of two-dimensional materials are usually measured using Raman spectroscopy, Magneto-optic Kerr effect, Magnetic circular dichroism or Anomalous Hall effect techniques. The dimensionality of the system can be determined by measuring the scaling behaviour of magnetization (${\displaystyle M}$), susceptibility (${\displaystyle \chi }$) or correlation length (${\displaystyle \xi }$) as a function of temperature. The corresponding critical exponents are ${\displaystyle \beta }$, ${\displaystyle \gamma }$ and ${\displaystyle v}$ respectively. They can be retrieved by fitting

${\displaystyle M(T)\propto (1-T/T_{\text{C}})^{\beta }}$,

${\displaystyle \chi (T)\propto (1-T/T_{\text{C}})^{-\gamma }}$ or

${\displaystyle \xi (T)\propto (1-T/T_{\text{C}})^{-v}}$

to the data. The critical exponents depend on the system and its dimensionality, as demonstrated in Table 1. Therefore, an abrupt change in any of the critical exponents indicates a transition between two models. Furthermore, the Curie temperature can be measured as a function of number of layers (${\displaystyle N}$). This relation for a large ${\displaystyle N}$ is given by

${\displaystyle T_{\text{C}}(N)/T_{\text{C}}^{\text{3D}}=1-(C/N)^{\frac {1}{v}}}$,

where ${\displaystyle C}$ is a material dependent constant. For thin layers, the behavior changes to ${\displaystyle T_{\text{C}}\propto N}$

Table 1: Critical exponents for two and three dimensional Ising models

Model	${\displaystyle \beta }$	${\displaystyle \gamma }$	${\displaystyle v}$
2D Ising	0.125	1.75	1
3D Ising	0.3265	1.237	0.630

Applications

Magnetic 2D materials can be used as a part of van der Waals heterostructures. They are layered materials consisting of different 2D materials held together by van der Waals forces. One example of such structure is a thin insulating/semiconducting layer between layers of 2D magnetic material, producing a magnetic tunnel junction. This structure can have significant spin valve effect, and thus they can have many applications in the field of spintronics. Another newly emerging direction came from the rather unexpected observation of magnetic exciton in NiPS_3.

References

1. ^ Gong, C.; et al. (2017). "Discovery of intrinsic ferromagnetism in two-dimensional van der Waals crystals". Nature. 546 (7657): 1–2. arXiv:1703.05753. Bibcode:2017Natur.546..265G. doi:10.1038/nature22060. PMID 28445468. S2CID 2633044.
2. ^ Huang, B.; et al. (2017). "Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit". Nature. 546 (7657): 270–273. arXiv:1703.05892. Bibcode:2017Natur.546..270H. doi:10.1038/nature22391. PMID 28593970. S2CID 4456526.
3. Samarth, N. (2017). "Magnetism in flatland". Nature. 546 (7657): 216–217. doi:10.1038/546216a. PMID 28593959.
4. ^ Jae-Ung, Lee; et al. (2016). "Ising-Type Magnetic Ordering in Atomically Thin FePS₃". Nano Letters. 16 (12): 7433–7438. arXiv:1608.04169. Bibcode:2016NanoL..16.7433L. doi:10.1021/acs.nanolett.6b03052. PMID 27960508. S2CID 30229806.
5. ^ Kim, Kangwon; Lim, Soo Yeon; Lee, Jae-Ung; Lee, Sungmin; Kim, Tae Yun; et al. (2019). "Suppression of magnetic ordering in XXZ-type antiferromagnetic monolayer NiPS3". Nature Communications. 10 (1): 345. arXiv:1901.10890. Bibcode:2019NatCo..10..345K. doi:10.1038/s41467-018-08284-6. PMC 6341093. PMID 30664705.
6. ^ Chu, Hao; Roh, Chang Jae; Island, Joshua O.; Li, Chen; Lee, Sungmin; et al. (2020). "A linear magneto-electric phase in ultrathin MnPS₃ probed by optical second harmonic generation". Physical Review Letters. 124 (2): 027601. arXiv:2001.07219. Bibcode:2020PhRvL.124b7601C. doi:10.1103/PhysRevLett.124.027601. PMID 32004043. S2CID 210838637.
7. ^ Fei, Z.; et al. (2018). "Two-dimensional itinerant ferromagnetism in atomically thin Fe₃GeTe₂". Nature Materials. 17 (9): 778–782. arXiv:1803.02559. Bibcode:2018NatMa..17..778F. doi:10.1038/s41563-018-0149-7. PMID 30104669. S2CID 51972811.
8. ^ Burch, Kenneth; Mandrus, David; Park, Je-Geun (2018). "Magnetism in two-dimensional van der Waals materials". Nature. 563 (7729): 47–52. Bibcode:2018Natur.563...47B. doi:10.1038/s41586-018-0631-z. OSTI 1481645. PMID 30382199. S2CID 53180804.
9. ^ Gibertini, M.; et al. (2019). "Magnetic 2D materials and heterostructures". Nature Nanotechnology. 14 (5): 408–419. arXiv:1910.03425. Bibcode:2019NatNa..14..408G. doi:10.1038/s41565-019-0438-6. PMID 31065072. S2CID 205568917.
10. ^ Cheng, Gong (2019). "Two-dimensional magnetic crystals and emergent heterostructure devices". Science. 363 (6428): 4450. doi:10.1126/science.aav4450. PMID 30765537. S2CID 62860328.
11. Je-Geun, Park (2016). "Opportunities and challenges of two-dimensional magnetic van der Waals materials: magnetic graphene?". Journal of Physics: Condensed Matter. 28 (30): 301001. arXiv:1604.08833. doi:10.1088/0953-8984/28/30/301001. PMID 27272939. S2CID 46782034.
12. Kuo, Cheng-Tai; Neumann, Michael; Balamurugan, Karuppannan; Park, Hyun Ju; Kang, Soonmin; Shiu, Hung Wei; Kang, Jin Hyoun; Hong, Byung Hee; Han, Moonsup; Noh, Tae Won; Park, Je-Geun (15 February 2016). "Exfoliation and Raman Spectroscopic Fingerprint of Few-Layer NiPS3 Van der Waals Crystals". Scientific Reports. 6 (1): 20904. Bibcode:2016NatSR...620904K. doi:10.1038/srep20904. PMC 4753463. PMID 26875451.
13. Peierls, R. (1936). "On Ising's model of ferromagnetism". Proceedings of the Cambridge Philosophical Society. 32 (3): 477–481. Bibcode:1936PCPS...32..477P. doi:10.1017/S0305004100019174. S2CID 122630492.
14. ^ Kim, Kangwon (2019). "Antiferromagnetic ordering in van der Waals two-dimensional magnetic material MnPS₃ probed by Raman spectroscopy". 2D Materials. 6: 041001. arXiv:1906.05802. doi:10.1088/2053-1583/ab27d5. S2CID 189762430.
15. de Jongh, L. J. (1990). Magnetic Properties of Layered Transition Metal Compounds (Vol. 9, 1 ed.). Netherlands: Springer. ISBN 978-94-009-1860-3.
16. Fisher, M. E.; Barber, M. N. (1972). "Scaling theory for finite-size effects in critical region". Physical Review Letters. 28 (23): 1516–1519. Bibcode:1972PhRvL..28.1516F. doi:10.1103/PhysRevLett.28.1516.
17. Zhang, R. J.; Willis, R. F. (2001). "Thickness-dependent Curie temperatures of ultrathin magnetic films: Effect of the range of spin-spin interactions". Physical Review Letters. 86 (12): 2665–2668. Bibcode:2001PhRvL..86.2665Z. doi:10.1103/PhysRevLett.86.2665. PMID 11290006.
18. Wang, Z.; et al. (2018). "Tunneling spin valves based on Fe₃GeTe₂/hBN/Fe₃GeTe₂ van der Waals heterostructures". Nano Lett. 18 (7): 4303–4308. arXiv:1806.05411. Bibcode:2018NanoL..18.4303W. doi:10.1021/acs.nanolett.8b01278. PMID 29870263. S2CID 206747719.
19. Kang, Soonmin (2020). "Coherent many-body exciton in van der Waals antiferromagnet NiPS3". Nature. 583 (7818): 785–789. Bibcode:2020Natur.583..785K. doi:10.1038/s41586-020-2520-5. PMID 32690938. S2CID 220656695.

• Magnetism
• Ferromagnetic materials
• Materials science
• Two-dimensional nanomaterials
• Condensed matter physics
• Semiconductors