Misplaced Pages

PK machine gun

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from PK Machine Gun) General-purpose machine gun/Squad automatic weapon
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "PK machine gun" – news · newspapers · books · scholar · JSTOR (June 2021) (Learn how and when to remove this message)
PK machine gun
PKS (PK machine gun mounted on a Samozhenkov 6T2 tripod)
TypeGeneral-purpose machine gun
Squad automatic weapon
Medium machine gun
Place of originSoviet Union
Service history
In service1961–present
Used bySee Users
WarsSee Conflicts
Production history
DesignerMikhail Kalashnikov
Designed1961
ManufacturerDegtyaryov plant
Produced1961 – present
VariantsSee Variants
Specifications
Mass9 kg (19.84 lb) (gun + integral bipod)
Length1,203 mm (47.4 in)
Barrel length605 mm (23.8 in)

Cartridge7.62×54mmR
ActionGas-operated, long-stroke piston, open, rotating bolt
Rate of fireCyclic:
600–800 rounds/min
700–800 rounds/min (PKT/PKTM)
Practical:
250 rounds/min
Muzzle velocity825 m/s (2,707 ft/s)
Effective firing range1,000 m (1,094 yd) (100–1,500 m sight adjustments)
Maximum firing range3,800 m (4,156 yd)
Feed systemNon-disintegrating metal link 50-round belts in 100 and 200 or 250-round ammunition boxes
SightsTangent iron sights (default);
Optical, night-vision, thermal, and radar sights

The PK (Russian: Пулемёт Калашникова, transliterated as Pulemyot Kalashnikova, or "Kalashnikov's machine gun") also commonly known as the PKM, is a belt-fed general-purpose machine gun, chambered for the 7.62×54mmR rimmed cartridge.

Designed in the Soviet Union and currently in production in Russia, the original PK machine gun was introduced in 1961 and the improved PKM variant was introduced in 1969. The PKM was designed to replace the SGM and RP-46 machine guns that were previously in Soviet service.

The weapon remains in use as a front-line infantry and vehicle-mounted weapon with Russia's armed forces and has also been exported extensively and produced in several other countries under license.

History

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (June 2024) (Learn how and when to remove this message)

The Main Artillery Directorate of the Soviet Union (GRAU) adopted specification requirements for a new 7.62 mm general-purpose company and battalion-level machine gun that was to be chambered for a rifle cartridge in 1955.

In 1958 a machine gun prototype the Nikitin-Sokolov PN1, developed by G.I. Nikitin and Yuri M. Sokolov, successfully passed field tests. Based on the results of the tests it was decided in 1960 to manufacture a batch of Nikitin-Sokolov machine guns for service tests and then put the machine gun into production at the Kovrov Mechanical Plant. However, the weapon had some flaws, the main flaw being that the weapon did not resist water and snow very well. Water and snow had a tendency to enter the gas piston. If, after firing, the machine gun was in the water, then after two or three shots the machine gun could fire exclusively only shot by shot. After a single shot, the shooter had to reload the weapon and move the slide manually two or three times. The army therefore asked Nikitin to solve this problem, but the engineer took too long to resolve this problem. In order to force Nikitin to work faster, the Main Artillery and Missile Directorate decided in 1958 to restart the competition. For that a team of Izhevsk Mechanical Plant designers, headed by M.T. Kalashnikov, and further consisting of V.V. Krupin, V.N. Pushchin, A.D. Kryakushin, as well as Startsev, Kamzolov, Koryakovtsev, Yuferev, joined the competition. Kalashnikov and his team accepted the task while at the same time, they were already working on the design of the AKM and the RPK. Kalashnikov accepted the task despite his workload and the fact that Nikitin's PN1 had already been chosen by the army and that the latter was supported by certain ministries and senior officers. Their machine gun prototype was based on the well-proven gas-operated rotary-bolt design of the Kalashnikov-pattern arms.

The Kalashnikov and the Nikitin-Sokolov prototypes underwent service tests in the Central Asian, Odessa, and Baltic Military Districts, as well as at the Vystrel officer training courses in late 1960. The Main Missiles and Artillery Directorate and the Ministry of the Defence Industry preferred the Kalashnikov design. The PK could resist water perfectly, but it was also much easier to maintain and manufacture, because it reused the same ammunition bands as the Maxim or SG-43, while the PN1 used a new type of bands which was not yet in production at the time. Furthermore, according to Kalashnikov, its competitors attempted to bias the test by asking operators to lower the rate of fire because of overlapping bands during long bursts. There was also another incident during the test, according to Kalashnikov, the recoil of the PN1 was poorly distributed and a large part ended up in the stock; the pressure was so great that one of the soldiers responsible for testing the PN1 broke his cheekbone.

Based on the test results, the army preferred the Kalashnikov design. In 1961, the 7.62x54R mm Kalashnikov universal machine gun was adopted and put into production. The production of the PK/PKS took place at the Kovrov Mechanical Plant and used the tripod mount and an ammunition belt boxes originally designed for the Nikitin-Sokolov prototype machine gun.

Nikitin's and Sokolov's machine gun design was later used in the 12.7 mm NSV heavy machine gun that was put into production in 1971.

In June 2024, it's reported that the PKZ will eventually replace the PKM in Russian military service.

Design details

The original PK was a development of Kalashnikov's AKM assault rifle and the accompanying RPK light machine gun design that featured stamped receivers. The PK uses the 7.62×54mmR Eastern Bloc standard cartridge that produces significantly more bolt thrust when compared to the Eastern Bloc 7.62×39mm and 5.45×39mm intermediate cartridges. With the use of a single spare parts kit and two barrel assemblies the service life of the modernized PKM machine gun series is guaranteed for at least 25,000 rounds.

Operating mechanism

Front to back: PKM prototype, model of Shpitalniy tank machine gun prototype, TKB-264
PKM general-purpose machine gun with modern black polymer furniture and a 100-round ammunition box. Note the non-fluted barrel and revised flash hider.

The bolt and carrier design are similar to the AK-47 and other modernised Kalashnikov-pattern weapons, as is the stripping procedure performed to remove those mechanisms from the gun for cleaning. The bolt and bolt carrier are however oriented upside down compared to the AKM, with the piston and gas system being underneath the barrel.

Unlike the AKM and RPK the PK machine gun series is an open bolt design, which improves heat management during automatic fire compared to closed bolt designs and helps avoiding the dangerous phenomenon known as "cook-off", wherein the firing chamber becomes so hot that the propellant contained in a chambered round unintentionally ignites, making the weapon fire until the ammunition is exhausted. Open bolt designs typically operate much cooler than closed bolt designs due to the airflow allowed into the chamber, action and barrel during pauses between bursts, making them more suitable for constant full-automatic weapons such as machine guns. General-purpose machine guns like the PK are further normally issued with several quick change barrels that during prolonged intense use are swapped out allowing one barrel to cool while the machine gun fires with the other.

The rimmed 7.62×54mmR cartridges are set in a metal ammunition belt and are held against the shoulder inside non disintegrating looped links, leaving the rim exposed at the rear. The belt is mounted from the right side into the feed way of the PK machine gun. The PK uses a non-reciprocating charging handle on the right side of the receiver to charge the gun. Since the PK uses a rimmed rifle cartridge and closed-link belts used for feeding, a two-stage feed mechanism with a preliminary extraction of a cartridge from a belt link was preferred over a direct ammunition feed design often used for rimless cartridges.

The PK machine gun is equipped with a lever-type feed mechanism introduced in Louis Stange's MG 39 Rh and copied in the Czechoslovak machine guns like vz. 52 and vz. 59, which is operated by the feed lever. The lever, which is simplified compared to the prior art, is mounted on the right wall of the receiver and wraps around the bolt carrier with its feed pawl and roller. The rest of the mechanism is mounted either on the receiver cover or on the ammunition feed tray cover hinged under it. The PK feed mechanism pulls the rimmed 7.62×54mmR cartridges out from the back of the ammunition belt and drops the cartridges down into the feed way, allowing the bolt to strip and feed the cartridges into the chamber for firing.

The PK feed mechanism is radically different from that of 7.62×51mm NATO machine guns based on the MG 42 feed mechanism that typically incorporate a much larger (and therefore much heavier) articulated feed cam, lever, and pawl assembly that pushes rimless cartridges out forward from their links directly into the chamber for firing.

The PK fires from the rear sear. The breech is locked by a rotating bolt, with two locking lugs engaging locking recesses in the receiver. The gas piston is hinged to the bolt carrier assembly, and its vertical travel makes it possible to bend the group making machine gun assembly and disassembly for maintenance easier. The protruding rear part of the bolt carrier assembly features spiral shaped cuts, which provide a controlled rotation of the bolt. The mainspring is accommodated in the bolt carrier assembly slide channel. A cartridge extractor with a latch is mounted in the rear part of the bolt carrier assembly. The cocking lever, mounted on the right, is not integral with the bolt carrier and does not reciprocate as the gun fires.

The gas cylinder is mounted under the barrel and fitted with a gas regulator with three fixed positions. The gas regulator opens corresponding holes to change the amount of expanding propellant gases bled off out of the gas cylinder into the atmosphere, thus varying the amount of energy transferred on to the long-stroke piston.

Receiver

The PK general-purpose machine gun U-shaped receiver is stamped from a smooth 1.5 mm (0.06 in) sheet of steel that is supported extensively by pins and rivets. For additional rigidity and strength the PK receiver features double walls made from 1.5 mm steel plates that are welded together with the U-shaped stamping. The receiver top cover is also stamped from 1.5 mm sheet metal and hinged on the front of the receiver and locked at the back with a spring-loaded latch.

Barrel

The quick detachable barrel assembly slides into the receiver and attaches by a barrel-lock. On the original PK it was partially fluted to increase rigidity and improve heat dissipation. The barrel-lock also regulates the gap between the breech face and the breech end of the barrel. PK barrels have a folding carry handle/grip that is positioned to the left of the receiver and is used to transport the weapon and quickly and safely change-out barrels to prevent barrel overheating. The bore is chrome-lined and features four right-hand grooves at a 240 mm (1 in 9.45 in) rifling twist rate. The muzzle is threaded for the installation of various muzzle devices such as a flash hider. The muzzle was normally equipped with a conical flash suppressor that added 53 mm (2.1 in) to the barrel and later a long slotted flash suppressor that added 72 mm (2.8 in) to the barrel. Later when the PKM variant was introduced the PK series barrel fluting was omitted and the muzzle device was changed to a shorter cylindrical slotted flash suppressor that added 40 mm (1.6 in) to the barrel. The PKM barrel assembly weighs 2.4 kg (5.3 lb) and can fire up to 400 rounds in rapid fire scenarios before it has to be replaced for another barrel or allowed to cool down to prevent unacceptable wear of the bore. The sustainable effective rate of fire is about 250 rounds per minute. Whilst, the cyclic rate of fire is around 600–800 rounds per minute.

Sights

Rear iron sight element on a PKM receiver

Iron sights

The rear sight assembly is riveted onto the receiver cover and consist of a square notched rear tangent iron sight calibrated in 100 m (109 yd) increments from 100 to 1,500 m (109 to 1,640 yd) and includes a "point-blank range" battle zero setting corresponding to a 330 m (361 yd) zero. It is identical in design to the AKM and Mosin–Nagant, except that it is oriented backwards with the notch forward and the hinge behind. The iron sight line has a 663 mm (26.1 in) sight radius. Like the RPD rear sight, the PK rear sight also features full windage adjustment in the form of small dials on either side of the notch.

The front sight assembly is mounted near the end of the barrel and consists of a protected open post adjustable for elevation in the field.

Optical sights

PK machine guns that feature a Warsaw Pact side-rail bracket on the left side of the receiver can mount various aiming optics. The standard Russian side rail mounted optical sight was the 4×26 1P29 Universal sight for small arms, an aiming optic similar to the British SUIT and SUSAT and Canadian C79 optical sights. When mounted, the 1P29 sight is positioned centered above the receiver at a height that allows the use of the iron sights. It weighs 0.8 kg, offers 4× magnification with a field of view of 8° and 35 mm eye relief. The 1P29 is issued with a canvas pouch, a lens cleaning cloth, combination tool, two rubber eyecups, two eyecup clamps and three different bullet drop compensation (BDC) cams for the AK-74, RPK-74 and PK machine gun. The 1P29 is intended for quickly engaging point and area targets at various ranges. On the right side of the field of view a stadiametric rangefinder is incorporated that can be used to determine the distance from a 1.5 meters (4 ft 11.1 in) tall object from 400 to 1,200 m (437 to 1,312 yd). The reticle is an inverted aiming post in the top half of the field of view and is tritium-illuminated for low-light condition aiming. A later designed similar optical sight suitable for the PK machine gun series is the 4×24 1Р77.

Trigger

The trigger assembly, mounted inside the receiver, is operated by the mainspring and suitable for automatic fire. It has no single shot mode of fire. The manual rotating type safety locks the sear, which engages the sear notch of the bolt carrier assembly, and the trigger lug does not allow the bolt carrier assembly to go all the way back.

Stock

The skeletonized buttstock, pistol grip and folding carry handle/grip on the barrels were originally manufactured from birch plywood laminates. Such engineered woods are stronger and resist warping better than the conventional one-piece patterns, do not require lengthy maturing, and are cheaper. The wooden furniture was finished with the Russian amber shellac finishing process. Small accessories and an oil-solvent container can be stored inside butt recesses. Later the buttstock was fitted with a hinged butt-rest. More recent PKM machine guns and barrel assemblies are equipped with a new black glass-filled polyamide buttstock, pistol grip and barrel carry handle/grip shaped like the previously used laminated wooden stock and grips.

Feeding

Non-disintegrating metal 7.62×54mmR ammunition belt used by the PK machine gun

PK machine guns are belt-fed, using non-disintegrating metal belts, which have links that wrap around the cartridge case shoulder all the way around, and are linked by a coiling wire on each side. The links are made of 0.8 mm (0.03 in) thick high carbon stamped steel sheet metal that is zinc phosphated and varnished for protection. These belts are preloaded at ammunition factories in 25-round connectable belt lengths and can be linked to any length necessary. Factory connected PK ammunition belts are available in 25, 100, 200 and 250 rounds lengths. Typical of Soviet machine guns, the PK feeds from the right and ejects its spent cases via an ejection port on the left side of the weapon, contrary to the right side ejection port seen in most Western machine guns.

For the light machine gun role, the PK is used as the standard squad automatic weapon of the Russian Army. The PK uses a 100-round non-disintegrating belt contained in a metal box made from an aluminium frame and steel cover that can be attached under the gun's receiver. The 100-round belt "assault" box has a folding lid in its cover for feeding the ammunition belt when the box is attached under the machine gun receiver and weighs 3.9 kg (8.60 lb) or 3.4 kg (7.50 lb) for the modernised all aluminium lightweight variant. When the machine gun is fired from a bipod, the 100-round ammunition box is normally attached to the underside of the receiver.

For the medium machine gun role, there is also a 200/250-round ammunition box made from an aluminium frame and steel cover available which can be mounted on the tripods used for the PK machine gun series. A 200/250-round ammunition box containing a 250-round non-disintegrating belt weighs 9.4 kg (20.72 lb) and containing a 200-round non-disintegrating belt weighs 8 kg (17.64 lb) or 6.2 kg (13.67 lb) for the modernised all aluminium lightweight variant. Both metal ammunition boxes have canvas carry handles.

All openings on the machine gun, particularly the ejector port on the left and the belt feed entrance on the right, are covered with spring-loaded dust covers so that the openings are only exposed when they need to be.

Accessories

The PK is equipped with a simple detachable bipod mounted to the gas cylinder beneath the barrel and in that light machine gun setup is used as a squad-level support weapon. The right bipod leg accommodates links of a cleaning rod. Other accessories include a sling and storage covers.

The PK machine gun is also suitable for installation on tripod mounts or vehicle mounted medium machine gun setups and can also be used as a light anti-aircraft weapon against slow flying aircraft when it is put on an AA mount.

As with all general-purpose machine guns, tripod and vehicle mountings offer a higher degree of accuracy and control than when used on a less stable bipod. The PK machine gun, firing short bursts from a bipod, as a light machine gun has the following accuracy of fire: a mean deviation of 7–10 cm (2.8–3.9 in) at a range of 100 m (109 yd), 37–51 cm (15–20 in) at 500 m (547 yd), and 71–103 cm (28–41 in) at 1,000 m (1,094 yd). The Russian and other European militaries use a circular error probable method that assumes a 50% hit probability (R50).

Variants

PKS

For heavier employment, the PKS (ПК Станковый: "PK Mounted") is based on the Samozhenkov 6T2 tripod mount. The PK and 6T2 tripod weigh 16.5 kg (36.38 lb).

The 6T2 Samozhenkov general-purpose tripod mount was designed by E. S. Samozhenkov and entered service in 1961 and weighs 7.5 kg (16.53 lb). The 6T2 Samozhenkov tripod mount was earlier envisioned for the Nikitin-Sokoiov machine gun that was not adopted by the Soviet Union. All types of ammunition belt boxes are carried and mounted separately. The Rakov device is used for loading ammunition belts. The PK machine gun is attached to a cradle on the 6T2 Samozhenkov mount. The cradle is hinged to a plug-in swivel equipped with a rack-and-pinion traversing mechanism, and a rod-and-screw elevation mechanism. The traversing mechanism is fitted with stops to limit the field of fire. For anti-aircraft fire or fire against ground targets from a kneeling position the cradle mounts a collapsible pole with a pivoting bracket. The mount features non-digging-in spades — sliding spades affect the accuracy of fire less than a "jumping" tripod with dug-in spades. There is an extra folding spade on the front leg for slippery and moving ground. Hinged tripod legs allow a gunner to fire the machine gun from a prone, a sitting, or a kneeling position.

The PKS machine gun, firing bursts from its tripod with fixed traversing and elevation mechanisms, as a medium machine gun has the following accuracy of fire: mean deviation of 5–6 cm (2.0–2.4 in) at a range of 100 m (109 yd), 25–29 cm (9.8–11.4 in) cm at 500 m (547 yd), and 49–68 cm (19–27 in) at 1,000 m (1,094 yd). The Russian and other European militaries use a circular error probable method that assumes a 50% hit probability (R50) and cannot be converted and is not comparable to US military methods for determining small arms accuracy. When the R50 results are doubled the hit probability increases to 93.7%.

PKB

The PKB is a variant of the PK that has been designed for use as a pintle mounted machine gun on combat vehicles. A swivel has been attached to the middle of the PKB. Another configuration of the PKB has the normal stock and trigger mechanism removed and replaced by twin spade grips and a butterfly trigger.

PKT

PKT solenoid-fired coaxial version with its longer and heavier barrel assembly

The PKT (ПК Танковый, "PK Tank") (1968) is a solenoid-fired coaxial version of PK to replace the SGMT Goryunov vehicle-mounted machine gun. Modifications include the removal of the stock, a longer (722 mm (28.4 in)) and heavier barrel that adds 30 m/s (98 ft/s) muzzle velocity, a gas regulator and an electric solenoid trigger. The PKT minimum cyclic rate of fire is 100 rounds per minute higher than other PK-series variants and is usually fed from 250-round ammunition boxes. The PKT barrel assembly weighs 3.23 kg (7.1 lb) and can fire up to 500 rounds in rapid fire scenarios before it has to be replaced for another barrel or allowed to cool down to prevent unacceptable wear of the bore. Some PKTs have been converted to infantry machine guns.

PKM

The PKM (ПК Модернизированный: "Kalashnikov's Machine-gun Modernised"), was adopted into service in 1969. The PKM is a modernised, product-improved version of the PK. The upgrades are primarily aimed at reducing the weight, simplifying production, and facilitating easier operation. The receiver cover became more rigid due to lengthwise ribs. The butt was fitted with a hinged butt-rest. The barrel fluting was omitted and the flash hider was changed. Later on the PKM was equipped with a new black glass-filled polyamide buttstock and pistol grip shaped like the previously used laminated wooden stock and grip.

PKMN

The PKMN (ПКМ Ночной: "PKM Night-Vision") is a variant that can mount a night sight for low-visibility operations. The PKMN-1 can thus mount the multi-model NSPU-3 (1PN51) night vision scope while the PKMN-2 can mount the multi-model NSPUM (1PN58) night vision scope. It can also be fitted with the 1PN93 series passive night sights.

Besides the Shakhin and 1PN116 thermal sights and the 1PN119 anti-sniper special-purpose night vision sight are available for mounting on PK machine guns that like the PKMN model feature a Warsaw Pact side-rail bracket on the left side of the receiver for mounting aiming optics.

PKMS

PKMS (PKM mounted on a Stepanov 6T5 tripod mount). Notice the ammunition belt box secured to the right rear tripod leg and buttstock field repair.

For heavier employment, the PKMS (ПКМ Станковый: "PKM Mounted") is mounted on the Stepanov 6T5 tripod mount. The PKM and 6T5 tripod weigh 12 kg (26.46 lb).

The tripod mount, designed by L. V. Stepanov for the PKM machine gun entered service in 1969 and weighs 4.5 kg (9.92 lb). It is a lighter mount for the PK(M) general-purpose machine gun without affecting the accuracy of fire. Besides, the almost entirely from steel stampings made Stepanov mount has 20 fewer components than the preceding Samozhenkov tripod and is 40% less labour-intensive, simplifying and rationalizing production. The Stepanov mount is based on a principle of multi-functional components: the elevation mechanism frame is also used as a pole for kneeled shooting or anti-aircraft fire; the base sleeve also serves as the axis for attaching rear legs of the tripod: the machine gun attachment is combined with the elevation mechanism frame lock for anti-aircraft fire; the fine elevation adjustment mechanism is integrated with the elevation mechanism axis. Each tripod leg can be folded for transport or adjusted for proper height on uneven terrain. The ammunition belt box can be secured to the right rear tripod leg in such a manner that the gun can be moved with the ammunition box still in place and with the gun loaded. This enables one crew member to carry and operate the gun in combat without having to unload the gun before repositioning the gun.

PKMSN

The PKMSN (ПКМС Ночной: "PKMS Night-Vision") is a special model of the tripod-mounted variant (PKMS) that can mount night sights for low-visibility operations, similar to the PKMN.

The PKMSN variant can use NSPU-3 (1PN51) and NSPUM (1PN58) night sights. It can also be fitted with the 1PN93 series passive night sights.

Besides that Shakhin and 1PN116 thermal sights and the 1PN119 anti-sniper special-purpose night vision sight are available for mounting on PK machine guns that like the PKMSN model feature a Warsaw Pact side-rail bracket on the left side of the receiver for mounting aiming optics.

PKTM

Modernised version of the PKT.

PKBM

Modernised version of the PKB.

PKP Pecheneg

Main article: PKP Pecheneg machine gun
PKP Pecheneg with 100-round ammunition box
Pecheneg-SP machine gun
  • The PKP Pecheneg (6P41) (2001) is a further development and modification of the PKM. It has a heavy fixed barrel encased in a radial cooling sleeve that uses forced-air cooling, much like the Lewis Gun of World War I.
  • 6P41N Pecheneg-NP version with a rail for mounting nightscopes.
  • Pecheneg-SP (6P69) improved modernised version.

Foreign copies

HCP PKM-NATO prototype and UKM-2000 (Poland)

In the early 1990s, as part of the preparations to join NATO, the Polish armed forces were looking for a replacement for the PK-series machine guns then in service. The H. Cegielski - Poznań S.A. Works in Poznań modified the PK/PKS to feed standard 7.62×51mm NATO cartridges and use NATO standard ammunition belts. The new model received the code-name PKM-NATO (or PKM-N). The modifications included a heavier barrel, a larger chamber, and a redesign of the lock, bolt, extractor, and the entire feeding mechanism. The prototype was tested from 1997 to 1999, but was rejected.

The Polish Army adopted the UKM-2000 machine gun instead in 2007, which was also based on the PKM.

Zastava M84/M86/M09/M10 (Yugoslavia/Serbia)

The Zastava M84 is a Yugoslav/Serbian-made licensed copy of the PK/PKS. The Zastava M86 is a copy of the solenoid-triggered PKT. These variants can be easily recognised by their unhollowed stock.

The Zastava M09 is a copy of the PKM with black synthetic furniture, chambered in 5.56x45 NATO ammo. The Zastava M10 is a variant of the M09 with a solid stock.

Norinco Type 80 (People's Republic of China)

The Type 80 is a Chinese-made copy of the PKM/PKMS.

The 7.62×51mm NATO variant CS/LM4 is also available for export.

Arsenal MG, MG-M1, MG-M1S, MG-1M, MG-M2, and MG-M2S (Bulgaria)

Bangladesh Army Arsenal MG-1MS machine gun on display at military hardware exhibition 2024 in Dhaka.

Arsenal originally produced the MG, modeled after the original Russian PK model. The MG-M1 is a licensed copy of the PKM with a synthetic buttstock and pistol grip. The MG-M1S only differs from the MG-M1 model due to the use of a tripod by the M1S model, where as the M1 model uses the original bi-pod design.

The MG-1M, an improved Squad Automatic Weapon variant, has improved features, such as a redesigned barrel that allows for better cooling. The MG-M2 and MG-M2S are the M1 and M1S model that were chambered in 7.62×51mm NATO.

In 2023 a group of Ukrainian volunteers purchased 1,460 PKMs from Bulgaria for a value of 6.75 million €, or a little more than 4,500 € per machine gun.

Cugir Mitraliera md. 66 (Romania)

The Mitraliera md. 66 is a Romanian-made copy of the PKM.

Mayak KM-7.62, KT-7.62 and KTM-7.62 (Ukraine)

The Mayak KM-7,62 is a copy of the PKM, made to be lighter and easier to handle. It first appeared in 2011. The KT-7,62 and KTM-7,62 are copies of the PKT, first appearing in 2011.

Production status

The PKM and other variants are in production in Russia and are currently exported to many nations. Additionally, various models are manufactured locally around the globe. A remotely controlled PKT version was reportedly entered service in November 2023. Zastava Arms produces the PK under license as the M84 (along with the PKT as the M86), and it remains in use with many of the former Yugoslav successor states. The most recent modification is the Russian PKP Pecheneg, which features a forced air cooling barrel and longer barrel life up to 10,000 rounds.

Users

A map of PK Machine Gun users
Russian police serviceman with a PKM machine gun
Iraqi Army soldier firing a PKS machine gun as part of the School of Infantry.
Syrian soldier with a PKM machine gun.

Former users

Non-state users

Conflicts

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (January 2021) (Learn how and when to remove this message)

1960s

1970s

1980s

1990s

2000s

2010s

2020s

See also

Notes

  1. ^ "7.62mm PKM Kalashnikov modernized machine gun". Archived from the original on 5 November 2014. Retrieved 13 November 2014.
  2. ^ "Open Joint Stock Company "V.A.Degtyarev Plant" / 7.62mm PKTM Kalashnikov tank machine gun". 2014-11-05. Archived from the original on 2014-11-05. Retrieved 2023-07-26.
  3. "Sights". Russian Close Combat Weapon. Moscow: Association "Defense Enterprises Assistance League". 2010. ISBN 978-5-904540-04-3.
  4. ^ Lawrence, Erik (13 March 2015). Practical Guide to the Operational Use of the PK/PKM Machine Gun. Erik Lawrence Publications. ISBN 9781941998212. Archived from the original on 5 October 2018. Retrieved 22 September 2017 – via Google Books.
  5. ^ "New russian PKZ Machine Gun Sparks Debate | Defense Express".
  6. ^ "MG 39 Rh". 19 December 2012.
  7. "Open Joint Stock Company "V.A.Degtyarev Plant" / 7.62mm PKM Kalashnikov modernized machine gun". 2014-11-05. Archived from the original on 2014-11-05. Retrieved 2023-07-26.
  8. ^ "PKM". military-today.com. Retrieved 2022-11-28.
  9. "7.62mm Machine Gun PKM". Rosoboronexport.
  10. 1P29 4.0x Magnification Archived 2013-12-04 at the Wayback Machine. Russianoptics.net
  11. "1P29 Universal sight for small arms NPZ Novosibirsk Instrument-Making Plant". Archived from the original on 29 November 2014. Retrieved 16 November 2014.
  12. "1Р77 Gunsight". gunrf.ru. Archived from the original on 2015-10-21. Retrieved 2015-09-21.
  13. ^ "PK/PKS Kalashnikov". gunrf.ru. Archived from the original on 2015-09-27. Retrieved 2015-09-18.
  14. Bonds, Ray; Miller, David (13 February 2003). Illustrated Directory of Special Forces. Voyageur Press. ISBN 9780760314197. Archived from the original on 1 December 2017. Retrieved 17 November 2017 – via Google Books.
  15. TAB (2022-03-27). "Ukraine Is Converting Salvaged Russian PKTs". The Armourers Bench. Retrieved 2022-05-27.
  16. "Ukraine Is Salvaging Russian Tank Machine Guns -". The Firearm Blog. 2022-04-07. Retrieved 2022-05-27.
  17. ^ ИЗДЕЛИЕ 1ПН51 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [PRODUCT 1PN51 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). January 1992. pp. 11, 16.
  18. ^ ИЗДЕЛИЕ 1ПН58 ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ [PRODUCT 1PN58 TECHNICAL DESCRIPTION AND OPERATING INSTRUCTIONS] (in Russian). February 1991. pp. 5, 13.
  19. ^ "1PN93 Magnus Night Wssion Sights". gunrf.ru. Archived from the original on 2015-09-26. Retrieved 2015-09-21.
  20. ^ "Shakhin Thermal Sights". gunrf.ru. Archived from the original on 2015-09-26. Retrieved 2015-09-21.
  21. ^ "1PN116 Thermal Sights". gunrf.ru. Archived from the original on 2015-09-26. Retrieved 2015-09-21.
  22. ^ "Anti-Sniper Special Purpose Night Vision Sights". gunrf.ru. Archived from the original on 2015-09-26. Retrieved 2015-09-21.
  23. "PKTM". gunrf.ru. Archived from the original on 2015-08-08. Retrieved 2015-09-18.
  24. ^ "UKM-2000: The Polish Successor to the PKM – Small Arms Defense Journal".
  25. "UKM-2000 machine gun (Poland)". 11 August 2018.
  26. Creamer, CPT Shawn (2005). "Operator's Manual: PK-Series General-Purpose Machinegun" (PDF). Department of the Army, National Ground Intelligence Center. Archived (PDF) from the original on March 10, 2016. Retrieved October 1, 2015.
  27. "Arsenal 7.62mm "ARSENAL" Machine Gun MG -1M". www.arsenal-bg.com. Archived from the original on 2015-09-23. Retrieved 2015-10-01.
  28. "7.62x51 mm ARSENAL Machine Gun MG-M2". www.arsenal-bg.com. Retrieved 5 March 2022.
  29. ^ "Small arms - ПАТ "Завод Маяк" - Українська зброя". www.mayak.com.ua. Archived from the original on 2016-11-19. Retrieved 2016-11-19.
  30. ^ "Arms & Security 2011". Small Arms Defense Journal. Archived from the original on 2016-11-19. Retrieved 2016-11-19.
  31. "Tank machine gun KT-7,62 - ПАТ "Завод Маяк" - Українська зброя". www.mayak.com.ua. Archived from the original on 2016-10-25. Retrieved 2016-11-19.
  32. "ЦАМТО / / Ростех разработал модули дистанционного управления танковым пулеметом". ЦАМТО / Центр анализа мировой торговли оружием (in Russian). 2023-11-17. Retrieved 2023-11-21.
  33. ^ Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). ISBN 978-0-7106-2869-5.
  34. "World Infantry Weapons: Algeria". 2015. Archived from the original on 24 November 2016. Retrieved 17 July 2020.
  35. "UNROCA original report Bangladesh 2007". Retrieved 23 July 2020.
  36. ^ "G3 Defence Magazine August 2010". calameo.com. Archived from the original on 9 July 2012. Retrieved 13 November 2014.
  37. Small Arms Survey (2007). "Armed Violence in Burundi: Conflict and Post-Conflict Bujumbura" (PDF). The Small Arms Survey 2007: Guns and the City. Cambridge University Press. p. 204. ISBN 978-0-521-88039-8. Archived from the original on 2018-08-27. Retrieved 2018-08-29.
  38. "Small Arms Survey - Working Papers" (PDF). 8 November 2012. Archived from the original (PDF) on 4 July 2010. Retrieved 13 November 2014.
  39. Letter dated 26 June 2014 from the Panel of Experts on the Central African Republic established pursuant to Security Council resolution 2127 (2013) addressed to the President of the Security Council (PDF). 1 July 2014. p. 81. Archived (PDF) from the original on 29 March 2017. Retrieved 30 January 2019.
  40. McGregor, Andrew (May 15, 2018). "How Russia Is Displacing the French in the Struggle for Influence in the Central African Republic". Eurasia Daily Monitor. 15 (74). Jamestown Foundation. Archived from the original on August 2, 2018. Retrieved September 26, 2018.
  41. YouTube https://youtube.com/GBe_75PqHM4?si=5h8OkmGD7XPXBAHl. {{cite web}}: Missing or empty |title= (help)
  42. Type 80 7.62mm General Purpose Machine Gun. Retrieved on September 11, 2008.
  43. Mikulka, Zdeněk (19 February 2010). "Střelby z palubních zbraní vrtulníků Mi-171Š v Afghánistánu". Zahraniční mise. Ministerstvo obrany. Archived from the original on 22 September 2013. Retrieved 16 May 2013.
  44. ^ Small Arms Survey (2015). "Waning Cohesion: The Rise and Fall of the FDLR–FOCA" (PDF). Small Arms Survey 2015: weapons and the world (PDF). Cambridge University Press. p. 202. Archived from the original (PDF) on 2018-01-28. Retrieved 2018-08-29.
  45. ^ Small Arms Survey (2007). "Probing the Grey Area: Irresponsible Small Arms Transfers" (PDF). The Small Arms Survey 2007: Guns and the City. Cambridge University Press. p. 93. ISBN 978-0-521-88039-8. Archived from the original on 2018-08-27. Retrieved 2018-08-29.
  46. "Rosyjska broń dla Fidżi" (in Polish). altair.pl. Archived from the original on 2016-03-04. Retrieved 2016-02-21.
  47. "Konekivääri 7.62 KK PKM". maavoimat.fi. Archived from the original on 15 December 2017. Retrieved 15 December 2017.
  48. Simha, Rakesh Krishnan (2016-07-11). "Indian weapons of Russian origin you barely knew existed". www.rbth.com. Retrieved 2021-09-20.
  49. "Mengenal Kemampuan Senapan Mesin PKT Di Ranpur BVP-2 Korps Marinir". indomiliter.com (in Indonesian). 2 January 2020. Retrieved 27 May 2021.
  50. "מתנות מהאויב: ההיסטוריה המפותלת של נשק השלל". Mako. 27 April 2016. Archived from the original on 5 February 2018. Retrieved 28 November 2017.
  51. de Tessières, Savannah (April 2012). Enquête nationale sur les armes légères et de petit calibre en Côte d'Ivoire: les défis du contrôle des armes et de la lutte contre la violence armée avant la crise post-électorale (PDF) (Report). Special Report No. 14 (in French). UNDP, Commission Nationale de Lutte contre la Prolifération et la Circulation Illicite des Armes Légères et de Petit Calibre and Small Arms Survey. p. 97. Archived from the original (PDF) on 2018-10-09. Retrieved 2018-08-30.
  52. Jenzen-Jones, N.R.; McCollum, Ian (April 2017). Small Arms Survey (ed.). Web Trafficking: Analysing the Online Trade of Small Arms and Light Weapons in Libya (PDF). Working Paper No. 26. p. 33. Archived from the original (PDF) on 2018-10-09. Retrieved 2018-08-30.
  53. "North Korean Small Arms". Small Arms Defense Journal. Archived from the original on 2016-08-27. Retrieved 2016-11-21.
  54. Cooper, Tom (2013). Great Lakes Conflagration: Second Congo War, 1998 2003. UK: Helion & Company Limited. p. 20. ISBN 978-1-920143-84-8.
  55. "World Infantry Weapons: Sierra Leone". 2013. Archived from the original on 24 November 2016.
  56. Savannah de Tessières (January 2018). At the Crossroads of Sahelian Conflicts: Insecurity, Terrorism, and Arms Trafficking in Niger (PDF) (Report). Small Arms Survey. p. 53. ISBN 978-2-940548-48-4. Archived from the original (PDF) on 2018-06-12. Retrieved 2018-06-05.
  57. "Chinese arms, radar for Sri Lanka military". 2007-06-05. Archived from the original on 2012-06-14. Retrieved 2010-05-04.
  58. "SLAHLAR". Archived from the original on 14 December 2014. Retrieved 13 November 2014.
  59. "MKEK's 7.62mm PKM and MAG designs, Production Ready? - The Firearm Blog". 13 October 2017. Archived from the original on 23 October 2017. Retrieved 22 October 2017.
  60. ^ Small Arms Survey (2006). "Fuelling Fear: The Lord's Resistance Army and Small Arms". Small Arms Survey 2006: Unfinished Business. Oxford University Press. p. 283. ISBN 978-0-19-929848-8. Archived from the original (PDF) on 2018-08-30. Retrieved 2018-08-29.
  61. UA Position (18 May 2016). "Defense Ministry introduces new Ukrainian-made light machine gun". Archived from the original on 19 November 2016. Retrieved 19 November 2016.
  62. "NVA". Archived from the original on 24 August 2012. Retrieved 13 November 2014.
  63. Phan Anh. "Triển lãm Quốc phòng quốc tế Việt Nam 2022". People's Army Newspaper (in Vietnamese). Retrieved 2024-03-19.
  64. Cooper 2013, p. 36.
  65. A 050/1/443.- 7,62 mm schweres Maschinengewehr PK, PKS, PKM, Befundaufnahme und Qualitätsfeststellung, Vorschriften der Nationalen Volksarmee
  66. Zaloga, Steven (1987). Inside the Soviet Army. Osprey Publishing. p. 24.
  67. "The Growing ISIS Arsenal, Pt. 1 | therightplanet.com". 27 October 2014. Archived from the original on 2014-10-27. Retrieved 20 January 2024.
  68. Noir, War. "Weapons Used and Captured by the PKK in 2021". www.militantwire.com. Retrieved 20 January 2024.
  69. Blanford, Nicholas. Warriors of God. (2011) p. 118
  70. Schuster, Carl O. (December 2016). "Arsenal | The NVA's 'Quick Change' Machine Gun". Vietnam Magazine. Archived from the original on May 15, 2022. Retrieved 21 December 2016 – via HistoryNet.
  71. Campbell, David (30 Nov 2017). Soviet Paratrooper vs Mujahideen Fighter: Afghanistan 1979–89. Combat 29. Osprey Publishing. pp. 42, 66–68. ISBN 9781472817648.
  72. Small Arms Survey (2005). "Sourcing the Tools of War: Small Arms Supplies to Conflict Zones". Small Arms Survey 2005: Weapons at War. Oxford University Press. p. 166. ISBN 978-0-19-928085-8. Archived from the original (PDF) on 2018-08-30. Retrieved 2018-08-29.
  73. "theage.com.au - The Age". www.theage.com.au. Archived from the original on 2017-03-05. Retrieved 2016-11-25.
  74. "Syrie: l'EI inflige un revers aux FDS dans l'est, mais reste acculé". France Soir (in French). 25 October 2018. Archived from the original on 25 October 2018. Retrieved 26 October 2018.
  75. "https://twitter.com/war_noir/status/1672555269925003271". Twitter. {{cite web}}: External link in |title= (help)

External links

General-purpose machine gun (GPMG)
Categories: