Misplaced Pages

South African type XF1 tender

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

South African type XF1 tender
SAR dimensional drawing
Type and origin
DesignerSouth African Railways
BuilderSouth African Railways
In servicec. 1925
Specifications
Configuration2-axle bogies
Gauge3 ft 6 in (1,067 mm) Cape gauge
Length22 ft 6+1⁄8 in (6,861 mm)
BogiesDiamond frame
Wheel dia.34 in (864 mm)
Wheelbase15 ft 7 in (4,750 mm)
 • Bogie5 ft 7 in (1,702 mm)
Axle load11 LT 4 cwt (11,380 kg)
 • Front bogie20 LT 5 cwt (20,570 kg)
 • Rear bogie22 LT 8 cwt (22,760 kg)
Weight empty43,136 lb (19,566 kg)
Weight w/o42 LT 15 cwt (43,440 kg)
Fuel typeCoal
Fuel cap.10 LT (10.2 t)
Water cap.3,000 imp gal (13,600 L)
StokingManual
CouplersDrawbar & Johnston link-and-pin
Drawbar & AAR knuckle (1930s)
Career
OperatorsSouth African Railways
NumbersSAR N37-N46
Main article: South African steam locomotive tenders

The South African type XF1 tender was a steam locomotive tender.

Ten Type XF1 tenders were built as spare tenders by the South African Railways during the 1920s. They were apparently not allocated to or built for any particular class of locomotive, but were suitable for use with a wide variety of serving engines.

Manufacturers

During the 1920s, ten Type XF1 tenders were built as spare tenders by the South African Railways (SAR).

Characteristics

Diamond Frame bogie

These tenders had a modern appearance, with flush sides all the way to the top of the coal bunker. They were very similar in appearance to those Type XF tenders which had been rebuilt by the SAR by mounting a completely new upper structure on the existing underframes. They had the same water capacity of 3,000 imperial gallons (13,600 litres) and coal capacity of 10 long tons (10.2 tonnes) as the Type XF, but rode on diamond frame bogies with a 12 inches (305 millimetres) longer wheelbase per bogie.

Locomotives

Tenders were usually numbered for the engines they were delivered with. The ten Type XF1 tenders were built as spare tenders, suitable for use with a wide variety of serving engines, and were therefore not numbered for specific engines but in the tender number range from N37 to N46. The "N" number prefixes usually indicated non-revenue earning vehicles.

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it can be coupled. The "X_" tenders could be used with the following locomotive classes:

The second letter indicates the tender's water capacity. The "_F" tenders had a capacity of 3,000 imperial gallons (13,600 litres; 3,600 US gallons).

A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.

References

  1. ^ South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 3'6" Gauge/Spoorwydte. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. p. 43.
  2. ^ South African Railways & Harbours/Suid Afrikaanse Spoorweë en Hawens (15 Aug 1941). Locomotive Diagram Book/Lokomotiefdiagramboek, 2'0" & 3'6" Gauge/Spoorwydte, Steam Locomotives/Stoomlokomotiewe. SAR/SAS Mechanical Department/Werktuigkundige Dept. Drawing Office/Tekenkantoor, Pretoria. pp. 6a-7a, 43.
South African steam locomotive tenders
Cape gauge
South Africa Locomotives of South Africa
Steam
7' ¼" gauge
Standard gauge
Cape gauge
Tank engines
Cape gauge
Tender engines
Cape gauge
Articulated
engines
2' 6" gauge
2' & 600mm
gauges
Electric
Gas-electric
Diesel
Cape gauge
Diesel–electric
2' gauge
Diesel–electric
Cape gauge
Diesel–hydraulic
Cape gauge
Electro-diesel
Category: