Misplaced Pages

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "National Emissions Standards for Hazardous Air Pollutants" – news · newspapers · books · scholar · JSTOR (April 2022) (Learn how and when to remove this message)

The National Emission Standards for Hazardous Air Pollutants (NESHAP) are air pollution standards issued by the United States Environmental Protection Agency (EPA). The standards, authorized by the Clean Air Act, are for pollutants not covered by the National Ambient Air Quality Standards (NAAQS) that may cause an increase in fatalities or in serious, irreversible, or incapacitating illness.

Maximum Achievable Control Technology standards

The standards for a particular source category require the maximum degree of emission reduction that the EPA determines to be achievable, which is known as the Maximum Achievable Control Technology (MACT) standards. These standards are authorized by Section 112 of the 1970 Clean Air Act and the regulations are published in the Code of Federal Regulations (CFR).

Pollutants

EPA regulates the following hazardous air pollutants with the MACT standards.

For all listings above which contain the word "compounds" and for glycol ethers, the following applies: Unless otherwise specified, these listings are defined as including any unique chemical substance that contains the named chemical (i.e., antimony, arsenic, etc.) as part of that chemical's infrastructure.

• ^1 X'CN where X = H' or any other group where a formal dissociation may occur. For example, KCN or Ca(CN)₂
• ^2 Includes mono- and di- ethers of ethylene glycol, diethylene glycol, and triethylene glycol R-(OCH₂CH₂)_n -OR' where

n = 1, 2, or 3

R = alkyl C7 (chain of 7 carbon atoms) or less; or phenyl or alkyl substituted phenyl

R' = H or alkyl C7 or less; or OR' consisting of carboxylic acid ester, sulfate, phosphate, nitrate, or sulfonate. Polymers are excluded from the glycol category, as well as surfactant alcohol ethoxylates (where R is an alkyl C8 or greater) and their derivatives, and ethylene glycol monobutyl ether (CAS 111-76-2).

• ^3 Includes mineral fiber emissions from facilities manufacturing or processing glass, rock, or slag fibers (or other mineral derived fibers) of average diameter 1 micrometer or less.
• ^4 Includes organic compounds with more than one benzene ring, and which have a boiling point greater than or equal to 100 °C.
• ^5 A type of atom which spontaneously undergoes radioactive decay.

Pollution sources

Most air toxics originate from human-made sources, including mobile sources (e.g., cars, trucks, buses) and stationary sources (e.g., factories, oil refineries, power plants), as well as indoor sources (e.g., building materials and activities such as cleaning). There are two types of stationary sources that generate routine emissions of air toxics:

1. Major sources are defined as sources that emit 10 or more tons per year of any of the listed toxic air pollutants, or 25 or more tons per year of a mixture of air toxics. These sources may release air toxics from fugitive emissions (equipment leaks), when materials are transferred from one location to another, or during discharge through emission stacks or vents.
2. Area sources consist of smaller facilities that release lesser quantities of toxic pollutants into the air. Area sources are defined as sources that do not emit more than 10 tons per year of a single air toxic or more than 25 tons per year of a combination of air toxics. Although the emissions from individual area sources are often relatively small, collectively their emissions can be of concern, particularly where large numbers of sources are located in heavily populated areas.

EPA published its initial list of source categories in 1992. Subsequently the agency issued several revisions and updates to the list and the regulatory promulgation schedule. For each listed source category, EPA indicates whether the sources are considered to be major sources or area sources. The 1990 Clean Air Act Amendments direct EPA to set standards for all major sources of air toxics, and for some area sources that are of particular concern. EPA is required to review all source category regulations every eight years.

See also

• Air pollution in the United States
• Mercury and Air Toxics Standards

References

1. United States. Clean Air Amendments of 1970. Pub. L. 91–604 Section 112. 42 U.S.C. § 7412
2. "Reducing Emissions of Hazardous Air Pollutants". Washington, D.C.: United States Environmental Protection Agency (EPA). 2021-01-26.
3. EPA. "National Emission Standards for Hazardous Air Pollutants." Code of Federal Regulations, 40 CFR 61. “National Emission Standards for Hazardous Air Pollutants for Source Categories.” 40 CFR 63
4. "Initial List of Hazardous Air Pollutants with Modifications". EPA. 2022-01-05.
5. EPA (1992-07-16). "Initial List of Categories of Sources Under Section 112(c)(1) of the Clean Air Act Amendments of 1990." Federal Register, 57 FR 31576.
6. "Risk and Technology Review of the National Emissions Standards for Hazardous Air Pollutants". Stationary Sources of Air Pollution. EPA. 2022-02-08.

External links

• Hazardous Air Pollutants - EPA

• Air pollution in the United States
• Chemical safety
• Emission standards
• Hazardous air pollutants
• Standards of the United States
• United States Environmental Protection Agency