Misplaced Pages

Zinc sulfide

ZnS powders containing different concentrations of sulfur vacancies
Names
Other names Zincblende Wurtzite
Identifiers
CAS Number	1314-98-3
3D model (JSmol)	Interactive image
ChemSpider	[https://www.chemspider.com/Chemical-Structure.8009652 2.3.3 European Community (EC) Number 215-251-3.html 8009652 2.3.3 European Community (EC) Number 215-251-3]
ECHA InfoCard	100.013.866
PubChem CID	14821
RTECS number	ZH5400000
UNII	KPS085631O
CompTox Dashboard (EPA)	DTXSID101318257 DTXSID7042518, DTXSID101318257
InChI InChI=1S/S.Zn/q-2;+2Key: DRDVZXDWVBGGMH-UHFFFAOYSA-N
SMILES .
Properties
Chemical formula	ZnS
Molar mass	97.474 g/mol
Density	4.090 g/cm
Melting point	1,850 °C (3,360 °F; 2,120 K) (sublime)
Solubility in water	negligible
Band gap	3.54 eV (cubic, 300 K) 3.91 eV (hexagonal, 300 K)
Refractive index (nD)	2.3677
Structure
Crystal structure	see text
Coordination geometry	Tetrahedral (Zn) Tetrahedral (S)
Thermochemistry
Std enthalpy of formation (ΔfH298)	−204.6 kJ/mol
Hazards
NFPA 704 (fire diamond)	1 0 0
Flash point	Non-flammable
Safety data sheet (SDS)	ICSC 1627
Related compounds
Other anions	Zinc oxide Zinc selenide Zinc telluride
Other cations	Cadmium sulfide Mercury sulfide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C , 100 kPa). Y verify (what is  ?) Infobox references

Zinc sulfide (or zinc sulphide) is an inorganic compound with the chemical formula of ZnS. This is the main form of zinc found in nature, where it mainly occurs as the mineral sphalerite. Although this mineral is usually black because of various impurities, the pure material is white, and it is widely used as a pigment. In its dense synthetic form, zinc sulfide can be transparent, and it is used as a window for visible optics and infrared optics.

Structure

ZnS exists in two main crystalline forms. This dualism is an example of polymorphism. In each form, the coordination geometry at Zn and S is tetrahedral. The more stable cubic form is known also as zinc blende or sphalerite. The hexagonal form is known as the mineral wurtzite, although it also can be produced synthetically. The transition from the sphalerite form to the wurtzite form occurs at around 1020 °C.

Applications

Luminescent material

Zinc sulfide, with addition of a few ppm of a suitable activator, exhibits strong phosphorescence. The phenomenon was described by Nikola Tesla in 1893, and is currently used in many applications, from cathode-ray tubes through X-ray screens to glow in the dark products. When silver is used as activator, the resulting color is bright blue, with maximum at 450 nanometers. Using manganese yields an orange-red color at around 590 nanometers. Copper gives a longer glow, and it has the familiar greenish glow-in-the-dark. Copper-doped zinc sulfide ("ZnS plus Cu") is used also in electroluminescent panels. It also exhibits phosphorescence due to impurities on illumination with blue or ultraviolet light.

Optical material

Zinc sulfide is also used as an infrared optical material, transmitting from visible wavelengths to just over 12 micrometers. It can be used planar as an optical window or shaped into a lens. It is made as microcrystalline sheets by the synthesis from hydrogen sulfide gas and zinc vapour, and this is sold as FLIR-grade (Forward Looking Infrared), where the zinc sulfide is in a milky-yellow, opaque form. This material when hot isostatically pressed (HIPed) can be converted to a water-clear form known as Cleartran (trademark). Early commercial forms were marketed as Irtran-2 but this designation is now obsolete.

Pigment

Zinc sulfide is a common pigment, sometimes called sachtolith. When combined with barium sulfate, zinc sulfide forms lithopone.

Catalyst

Fine ZnS powder is an efficient photocatalyst, which produces hydrogen gas from water upon illumination. Sulfur vacancies can be introduced in ZnS during its synthesis; this gradually turns the white-yellowish ZnS into a brown powder, and boosts the photocatalytic activity through enhanced light absorption.

Semiconductor properties

Both sphalerite and wurtzite are intrinsic, wide-bandgap semiconductors. These are prototypical II-VI semiconductors, and they adopt structures related to many of the other semiconductors, such as gallium arsenide. The cubic form of ZnS has a band gap of about 3.54 electron volts at 300 kelvins, but the hexagonal form has a band gap of about 3.91 electron volts. ZnS can be doped as either an n-type semiconductor or a p-type semiconductor.

History

The phosphorescence of ZnS was first reported by the French chemist Théodore Sidot in 1866. His findings were presented by A. E. Becquerel, who was renowned for the research on luminescence. ZnS was used by Ernest Rutherford and others in the early years of nuclear physics as a scintillation detector, because it emits light upon excitation by x-rays or electron beam, making it useful for X-ray screens and cathode-ray tubes. This property made zinc sulfide useful in the dials of radium watches.

Production

Zinc sulfide is usually produced from waste materials from other applications. Typical sources include smelter, slag, and pickle liquors. As an example, the synthesis of ammonia from methane requires a priori removal of hydrogen sulfide impurities in the natural gas, for which zinc oxide is used. This scavenging produces zinc sulfide:

ZnO + H₂S → ZnS + H₂O

Laboratory preparation

Crude zinc sulfide can be produced by igniting a mixture of zinc and sulfur. More conventionally, ZnS is prepared by treating a mildly acidic solution of Zn salts with H₂S:

Zn + S → ZnS

This reaction is the basis of a gravimetric analysis for zinc.

References

1. ^ Wang, Gang; Huang, Baibiao; Li, Zhujie; Lou, Zaizhu; Wang, Zeyan; Dai, Ying; Whangbo, Myung-Hwan (2015). "Synthesis and characterization of ZnS with controlled amount of S vacancies for photocatalytic H₂ production under visible light". Scientific Reports. 5: 8544. Bibcode:2015NatSR...5E8544W. doi:10.1038/srep08544. PMC 4339798. PMID 25712901.
2. Wells, A. F. (1984), Structural Inorganic Chemistry (5th ed.), Oxford: Clarendon Press, ISBN 0-19-855370-6.
3. Tesla, Nikola (1894). "The Inventions, Researches, and Writings of Nikola Tesla". Internet Archive. p. 290. Retrieved 2 January 2024.
4. Karl A. Franz, Wolfgang G. Kehr, Alfred Siggel, Jürgen Wieczoreck, and Waldemar Adam "Luminescent Materials" in Ullmann's Encyclopedia of Industrial Chemistry 2002, Wiley-VCH, Weinheim. doi:10.1002/14356007.a15_519
5. ^ Gerhard Auer, Peter Woditsch, Axel Westerhaus, Jürgen Kischkewitz, Wolf-Dieter Griebler and Marcel Liedekerke "Pigments, Inorganic, 2. White Pigments" in Ullmann's Encyclopedia of Industrial Chemistry 2009, Wiley-VCH, Weinheim. doi:10.1002/14356007.n20_n01
6. Sidot, T. (1866). "Sur les propriétés de la blende hexagonale". Compt. Rend. 63: 188–189.
7. Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. p. 1405. ISBN 978-0-08-022057-4.
8. Coustal, R. (1931). "Étude de la Phosphorescence du Sulfure de Zinc I. - La Méthode par Explosion". Journal de Chimie Physique. 28: 277–298. Bibcode:1931JCP....28..277C. doi:10.1051/jcp/1931280277.
9. F. Wagenknecht; R. Juza (1963). "Zinc Sulfide". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. Vol. 2pages=1075. NY,NY: Academic Press.
10. Mendham, J.; Denney, R. C.; Barnes, J. D.; Thomas, M. J. K. (2000), Vogel's Quantitative Chemical Analysis (6th ed.), New York: Prentice Hall, ISBN 0-582-22628-7

External links

• Zinc and Sulfur at The Periodic Table of Videos (University of Nottingham)
• Composition of CRT phosphors
• University of Reading, Infrared Multilayer Laboratory optical data
• melting point

• Monosulfides
• Zinc compounds
• II-VI semiconductors
• Luminescence
• Optical materials
• Phosphors and scintillators
• Ionising radiation detectors
• Zincblende crystal structure
• Wurtzite structure type