Misplaced Pages

Revision as of 17:36, 14 September 2011

This article includes a list of references, related reading, or external links, but its sources remain unclear because it lacks inline citations. Please help improve this article by introducing more precise citations. (March 2010) (Learn how and when to remove this message)

British Rail Class 42 Warship
British Rail Class 42 No. D832
Type and origin Power type Diesel-hydraulic Builder British Railways’ Swindon Works Build date 1958–1961 Total produced 38
Specifications Configuration: ​  • Whyte B-B  • UIC B'B' Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Wheel diameter 3 ft 3+1⁄2 in (1.003 m) Minimum curve 4.5 chains (91 m) Wheelbase 48 ft 3 in (14.71 m) Length 60 ft 0 in (18.29 m) Width 8 ft 10 in (2.69 m) Height 12 ft 0+1⁄2 in (3.670 m) Loco weight 78 long tons (79.3 t) Fuel capacity 800 imp gal (3,600 L; 960 US gal) Prime mover Bristol Siddeley Maybach MD650 (64.5 litres) or MAN L12V18/21B (64 litres). All 2 per locomotive. Transmission Hydraulic MU working ◆ White Diamond Train heating Steam Train brakes Vacuum
Performance figures Power output Engines: Maybach engines, 1135hp at 1530 rpm x 2 (D803-29, D831-32 & D866-70), or 1035hp at 1400 rpm × 2 (D800 to 802 only). MAN engines 1100 hp at 1530 hp x 2 (D833 to D865) Tractive effort Maximum: 48,200 lbf (214 kN)
Career Nicknames Warships Axle load class Route availability 7 (RA 6 from 1969) Retired 1968–1972

British Railways' (BR) Type 4 Warship class diesel-hydraulic locomotives were introduced in 1958. It was apparent at that time that the largest centre of expertise on diesel-hydraulic locomotives was in Germany. The Western Region of British Railways negotiated a licence with German manufacturers to scale down the German Federal Railway's "V200" design to suit the smaller loading gauge of the British network, and to allow British manufacturers to construct the new design. The resultant design bears a close resemblance both cosmetically and in the engineering employed. They were divided into two batches: those built at BR's Swindon works were numbered in the series D800 to D832 and from D866 to D870, had a maximum tractive effort of 52,400 pounds-force (233,000 N) and eventually became British Rail Class 42. 33 others, D833–865, were constructed by the North British Locomotive Company and became British Rail Class 43. They were allocated to Bristol Bath Road, Plymouth Laira, Newton Abbot and Old Oak Common.

Two Class 42s are preserved, D821 and D832 being the only survivors.

Overview

The Western Region of British Railways had decided upon hydraulic transmission with lightweight alloy construction for its new diesel locomotives to replace "King" and "Castle" class steam locomotives. This was partly because of the stiff gradients between Exeter and Plymouth on the Exeter to Plymouth line: to save fuel compared with hauling the additional weight of the locomotive up these gradients and allow an extra revenue-earning passenger coach to be added to the train.

Mechanical details

Each locomotive was powered by two Maybach 1035 hp (D800–802) or 1135 hp (D803–829, D831–832 and D866–870) MD650 engines coupled to Mekydro hydraulic transmissions. The lower engine rating in the first three was because the first batch of transmissions could not accept more than this; a shortcoming swiftly rectified, although the technology of the time limited hydraulic transmissions to below 2,000 hp (1,500 kW) input, hence the need for two engines. D830 Majestic was equipped with two Paxman YJXL Ventura engines rated at 1,200 hp (890 kW) each as a potential showcase of an alternative British engine which might prove superior to the German Maybach. The new locomotives were substantially lighter than previous diesel-electric designs: a Class 44 Peak locomotive weighed 138 long tons (140 t; 155 short tons) and required 8 axles to carry it; the D800s weighed less than 80 tons and only needed 4 axles. D800–802 were produced as a pilot order and differed slightly both mechanically and cosmetically from the others. Aside from the obvious differences of disc versus rollerblind headcodes and the slightly less powerful engines, D800–802 were only equipped with six power controller notches, which was found to be unsatisfactory for smooth acceleration and economical running in operational use. These differences meant D800–802 were effectively a separate sub-class and could not work in multiple with the others (although the "white diamond" code multiple working capability of the Warships was rarely used until the late 1960s, and was removed from many locomotives as a constant source of electrical problems).

In 1960 British Rail introduced the Class 43 diesel hydraulic locomotives, with a maximum tractive effort of 53,400 pounds-force (238,000 N). These were constructed by North British Locomotives, numbered in the range D833 to D865 and also bore names. Although of a very similar design to the Swindon-built examples, the 43s were equipped with MAN engines and Voith hydraulic transmissions at a similar power rating as the Swindon locomotives. The Maybach engines were a more sophisticated design, with advanced features such as oil-cooled pistons that the MAN design lacked. The German V200 class, upon which the D800 design was based, used Mercedes and Maybach engines – the MAN engines were not fitted in significant numbers to V200 locomotives – coupled to Mekydro and Voith transmissions in roughly equal proportions, with engines and transmissions being completely interchangeable. Thus one locomotive might have one Mercedes engine coupled to a Mekydro transmission and a Maybach coupled to a Voith. This interchangeability of engines and transmissions was theoretically a feature of the BR design as well, but was never exploited. Detail differences in the floor construction after the first few Swindon production locomotives removed the ability to exchange transmissions.

Names and liveries

Each locomotive bore a name: for example D825 was Intrepid. All except D800 and D812 were named after Royal Navy vessels, thus the "Warship diesel" moniker used to refer to the class. D800 was named Sir Brian Robertson after the Chairman of the British Transport Commission at the time. D812 was planned to carry the name Despatch but was eventually named Royal Naval Reserve 1859–1959. All except these two bore a subtitle "Warship Class" in smaller letters underneath the main name. A nice touch was that throughout the production series examples (including the NBL-built D833–865) the names were allocated alphabetically. This caused some difficulty when Swindon was unexpectedly given an order for five more locomotives (which became D866–870); a shortage of Warship names beginning with Z required some names for the higher numbered NBL examples to be reallocated. The original livery for all D800s was BR green with a light grey waistband and red bufferbeams. In the mid-1960s the WR decided upon maroon as its new house colour for mainline diesel locomotives, this going very much against standard schemes imposed by BR's overall management. In November 1966 the first D800 (D864) appeared in the new BR blue scheme with D864 carrying an experimental 'Burnt Umber' paint scheme around the lower skirting (an attempt to mask out brake dust). Half yellow nose ends appeared from January 1962 and eventually two Green, several Maroon and all Blue-liveried locomotives received full yellow ends. Green livery was eradicated by 1970 when D810 was repainted, this being the last green member of the class in service, although D800 had still carried the green livery when withdrawn in 1968. A handful of Maroon examples, including D809, D815 & D817 remained in traffic until 5 October 1971, and were finally withdrawn in this colour scheme, although by now wearing full yellow ends. Three of the early withdrawals, D801, D840 and D848, met their end in maroon with small yellow panels. After withdrawal of steam in 1968, the "D" prefix was dropped from locomotive running numbers when repaints occurred – so for example, D832 became just 832 as there was now no chance of it conflicting with a steam locomotive number.

Service

The D800s were originally intended for the Paddington–Birmingham Snow Hill route and tests proved that their extra weight and power allowed them to run to a two hour schedule with 368 tons in tow: one coach more than a Class 40 could manage. These plans were put back when Paddington became the temporary London terminus of choice for Birmingham during the early 1960s, whilst BR's preferred route from Euston via Rugby was electrified. Loads of greater than 370 tons would be required and the service remained steam-hauled until the advent of the more powerful Class 52 Western diesel-hydraulic locomotives. The first service route for the class therefore became Paddington–Penzance, either via Swindon and Bristol, or via Newbury and Westbury on the "Berks and Hants" route. This allowed for elimination of steam on the difficult-to-operate railway west of Newton Abbot. In October 1958 D800 became the first locomotive to take up the class's new diagram of the up Cornish Riviera Express (Penzance to Paddington), the 18:30 Paddington–Bristol and the 21:05 Bristol–Plymouth – the last part of the diagram allowing the locomotive to return to the brand new depot at Laira in Plymouth once this was fully operational in 1961.

The maximum speed of the D800 class was officially 90 mph (140 km/h) but this could not be rigidly enforced because the transmissions could not be precisely governed. 102 mph (164 km/h) was recorded by D801 in private tests during 1959, albeit on a downgrade. The summer of 1959 saw 100 mph (160 km/h) service trains diagrammed for D800s with the Paddington–Bristol "Bristolian" set a schedule of 100 minutes. The outward journey was via Bath and required an average speed of 71 mph (114 km/h) and the return journey via Badminton averaged at 70.6 mph (113.6 km/h). For a very brief period the D800s achieved both the schedule and more with D804 exceeding 100 mph (160 km/h) three times on one early run from Bristol. This was soon ended when the Western Region's civil engineers imposed a blanket 90 mph (140 km/h) maximum speed on all the Region's main lines, where for five years there had, uniquely to BR at the time, been no restrictions at all. The root cause of this worry was the effect of small-diameter powered wheels carrying far more weight per inch of tread than those of a steam locomotive. These concerns arose particularly from experiences in the United States of America although the significant rail damage reported there was mostly caused by wheel sliding under braking with heavy tailing loads which were very unlikely to occur on BR. With the benefit of modern hindsight it is possible that, even though the full US experience would not be replicated, "gauge corner cracking" (the formation of microscopic cracks in the rails that was the primary cause of the Hatfield rail crash of 17 October 2000 in the UK) could have been a possibility if the schedules had been adhered to.

In the event, several D800 drivers began reporting uncomfortable lurching over points or on poorly-maintained track at high speeds around this time. The problem was eventually traced to the novel design of the bogies and their means of attachment to the locomotive bodyshell: it had given the German V200s no trouble because of the 140 km/h (87 mph) V200s speed limit on the German Federal Railway at the time. High speed running magnified the effect of the almost rigid link between body and bogie, and oscillations created in the entire locomotive structure when the wheels hit pointwork or indifferent track made derailment a very real risk as the tyres on the wheels wore down. The D800s were subject to a maximum speed of 80 mph (130 km/h) until all class members could be modified – this was not achieved until 1963. The "Bristolian" was decelerated by 5 minutes but an extra stop at Chippenham was inserted so that the drivers practically had no choice but to exceed 80 mph (130 km/h) in order to keep to time. All speed running ceased after autumn 1960, when BR's timetabling methodology as a whole changed towards making all inter-city services more regular interval with standardised train formations and more intermediate stops. No longer would crack expresses such as the "Bristolian" be given such priority: the hope (largely successful) was to increase locomotive and coaching stock productivity and also increase passenger numbers in an attempt to curb BR's still-increasing monetary losses.

By 1964, the influx of both more powerful "Western" diesel-hydraulics and Class 47s drafted into the WR by BR's higher management, meant that some D800s were spared for use on the Waterloo–Exeter route. At this time, the Western Region (formed upon Nationalisation in 1948 largely from the Great Western Railway) had just assumed control of this line west of Salisbury from the Southern Region of British Railways and conveniently used the "no more crack expresses" edict to get revenge on its pre-Nationalisation rival the Southern Railway by withdrawing altogether the SR's Atlantic Coast Express, which worked beyond Exeter, and replacing it with a semi-fast Waterloo–Exeter service hauled by D800s. The WR also took the opportunity to reduce its former rival's main line to single track for long stretches west of Salisbury and to sell off the "surplus" land – a move that is widely regretted today.

The late 1960s saw a brief revival in the fortunes of the D800s. For a few months in late 1967 they moved on to the Paddington–Birmingham New Street route and then in early 1968 Paddington–Hereford. Rising traffic levels on the Paddington–Plymouth route meant the WR aspired to an hourly service interval for this route with standard 10 and 12 carriage trains. The maximum schedule was to be 4 hours 15 minutes for the 225.5 mi (362.9 km), but the "Cornish Riviera Express" would be retimed for 3 hours 45 minutes with stops at Taunton and Exeter only. The Class 52 Westerns could only cope with these timings on seven carriage trains. The answer was to assemble pairs of D800s and reinstate the multiple working equipment on them, to allow the pair to be controlled by one driver. This was done with D819/22–24/27–29/31/32 and D866–69 and the acceleration in schedules did bring a further 7% increase in traffic levels. It was not, however, without its problems: a fault on one locomotive in a multiple-unit pair effectively disabled both and one alone could not keep to the schedules. By 1969 only two services were booked for a pair of D800s, albeit losing a further 15 minutes off the schedule, and the timetable was largely recast into separate Torbay and Plymouth trains, instead of being split en-route. This allowed the formations to revert to eight or nine carriages that a single Western could handle alone.

Withdrawal

Prejudice against hydraulic transmission in the higher echelons of BR's engineering divisions decreed in 1967 that all the WR's diesel-hydraulics were non-standard and should be withdrawn as soon as possible. Added to this were practical problems modernising the D800s: because of the scaled-down bodyshell there was very little room inside for extra equipment. It was, for example, physically impossible to accommodate a compressor as well as an exhauster, so the locomotives were unable to haul newer designs of air-braked coaching stock. It also proved impractical to equip them with electric train heating (ETH) equipment, for similar reasons, so they retained unreliable steam heat boilers to the end of their lives. It was intended to equip no. D870 with ETH; to provide the necessary additional power, the engines would have been uprated by the fitment of charge-air coolers. No work was actually carried out, other than the fitment of appropriate jumper cables on the locomotive ends.

The pilot build trio were all withdrawn by early October 1968, these being followed by three of the NBL Class 43s (D840/48/63) in 1969 and then the mass withdawals of 1971 which saw the NBLs extinct by October. Several of the BR Class 42s soldiered on into 1972 and the last were withdrawn by the end of the year. Many withdrawn examples were hastily cannibalised for spare parts to keep the others going as stocks had been reduced in anticipation of a swifter end to D800 operation than was in the event possible. The "Cornish Riviera Express" remained booked for two D800s until the May timetable change in 1970. The early withdrawal dates meant that TOPS numbers were never worn, although the Swindon-built locomotives were allocated TOPS Class 42 and the NBL examples Class 43.

Around 1971 an approach was made to BR seeking to purchase Class 22 D6319. A price was agreed but before the new owners could retrieve their purchase, it was scrapped at Swindon Works. British Railways, embarrassed, offered the would-be owners their choice of the remaining Warships (D810/D812/D821 and D832) for the same price. D821 was chosen as it was in the best mechanical condition and thus became the first preserved ex-BR mainline diesel locomotive.

D818 became a gate guardian on display outside Swindon Works but was scrapped in 1985.

D832 was sent to the Railway Technical Centre at Derby where it was used for various research purposes until it too was secured for preservation. The others were scrapped. D832 was restored to full operational order using many of the parts from D818 and it is doubtful if there would have been enough components available to restore both D818 (which was missing several major items) and D832 without an expensive search for compatible German items, although this scenario became reality in September 2001 when D832 was fitted with a Mekydro transmission which was sourced from an ex-DB locomotive in Germany. As of late 2010 D821 is operational at the Severn Valley Railway and so is D832 at the West Somerset Railway, although the latter is currently undergoing a repaint and body repairs.

Class details

Notes on withdrawal dates

The dates presented are as given by Reed. A correspondent in issue 137 of Traction magazine reports some inaccuracies in these dates. For example, the correspondent claims to have seen 828 Magnificent throughout June 1971 and on 4 July 1971 to have seen it hauled dead by NBL type 2 no. 6326 with fire damage and presumed to be heading for withdrawal at Newton Abbot depot. 831 Monarch worked the 16:05 Exeter St David's to Barnstaple service and 17:55 return on 6 October 1971, three days after its supposed withdrawal. 826 Jupiter hauled 808, D819, D822 and 868 on a Newton Abbot to Bristol service on 10 October 1971, being requisitioned at Exeter on its return run to haul the 16:05 Barnstaple service owing to a severe locomotive shortage. 812 is claimed to have been in use long after 3 November 1971 and although 810 Cockade was withdrawn on 4 November 1971 it was reinstated on the 7th. On that same day, the correspondent notes 814 in use to power a convoy of 832 and 812 to Plymouth Laira depot where 814 was finally withdrawn, with 812 remaining in traffic. The situation with 832 is unclear because of its transfer to the technical department at Derby. The final four Warships of either kind (Class 42 or 43) in BR traffic were thus 810, 812, 821 and 824. 812 was in use on express passenger duties as late as 28 November 1972, over a year since its purported withdrawal. The last four locomotives were officially removed from capital stock on 3 December 1972; 821 Greyhound hauled an afternoon Bristol to Plymouth parcels train on that day, being almost certainly the last BR Warship-hauled revenue-earning train.

In fiction

• A modified Class 42 was seen in the redrawn version of The Adventures of Tintin book The Black Island.
• The character Diesel 10 from the film Thomas and the Magic Railroad is loosely based on the Class 42. As the main villain of the film, Diesel 10 has a rather unrealistic addition in the form of a roof-mounted hydraulic claw he affectionately nicknames "Pinchy".

Notes

1. Reed 1978, p. 52
2. Reed 1978, p. 55

References

• Freeman-Allen, Geoffrey (April and May 1983). "The Warship Story". Rail Enthusiast: p6&23. {{cite journal}}: |pages= has extra text (help); Check date values in: |date= (help)
• Marsden, Colin J (February – April 1986). "The Warships". Modern Railways Pictorial Profile (12). Weybridge: Ian Allan Ltd: 10. ISSN 0264-3642. {{cite journal}}: Check date values in: |date= (help)
• Reed, Brian (1978) . Diesel-Hydraulic Locomotives of the Western Region. Newton Abbot: David and Charles. ISBN 0 7153 6769 2. OCLC 1528492. {{cite book}}: Invalid |ref=harv (help)
• Till, J O (1978). Warship Stock List. Camberley: Steam & Diesel Publications.
• Mattias Maier, "Die Baureihe V200" Eisenbahn-Kurier (EK-Verlag; Freiburg) ISBN 3-88255-208-5

Further reading

• McManus, Michael. Ultimate Allocations, British Railways Locomotives 1948 - 1968. Wirral. Michael McManus.

External links

• D821 Greyhound – preservation history
• Photo of D821 in DB livery (carried 1988–1990 on NYMR)

• Articles with links needing disambiguation from June 2011
• Use dmy dates from June 2011
• British Rail diesel locomotives
• B-B locomotives
• Railway locomotives introduced in 1958