Misplaced Pages

The chemical composition of the electronic cigarette aerosol varies across and within manufacturers. Limited data exists regarding their chemistry. However, researchers at Johns Hopkins University analyzed the vape clouds of popular brands such as Juul and Vuse, and found "nearly 2,000 chemicals, the vast majority of which are unidentified."

The aerosol of e-cigarettes is generated when the e-liquid comes in contact with a coil heated to a temperature of roughly 100–250 °C (212–482 °F) within a chamber, which is thought to cause pyrolysis of the e-liquid and could also lead to decomposition of other liquid ingredients. The aerosol (mist) produced by an e-cigarette is commonly but inaccurately called vapor. E-cigarettes simulate the action of smoking, but without tobacco combustion. The e-cigarette aerosol looks like cigarette smoke to some extent. E-cigarettes do not produce aerosol between puffs. The e-cigarette aerosol usually contains propylene glycol, glycerin, nicotine, flavors, aroma transporters, and other substances. The levels of nicotine, tobacco-specific nitrosamines (TSNAs), aldehydes, metals, volatile organic compounds (VOCs), flavors, and tobacco alkaloids in e-cigarette aerosols vary greatly. The yield of chemicals found in the e-cigarette aerosol varies depending on, several factors, including the e-liquid contents, puffing rate, and the battery voltage.

Metal parts of e-cigarettes in contact with the e-liquid can contaminate it with metals. Heavy metals and metal nanoparticles have been found in tiny amounts in the e-cigarette aerosol. Once aerosolized, the ingredients in the e-liquid go through chemical reactions that form new compounds not previously found in the liquid. Many chemicals, including carbonyl compounds such as formaldehyde, can inadvertently be produced when the nichrome wire (heating element) that touches the e-liquid is heated and chemically reacted with the liquid. Propylene glycol-containing liquids produced the most amounts of carbonyls in e-cigarette vapors, while in 2014 most e-cigarettes companies began using water and glycerin instead of propylene glycol for vapor production.

Propylene glycol and glycerin are oxidized to create aldehydes that are also found in cigarette smoke when e-liquids are heated and aerosolized at a voltage higher than 3 V. Depending on the heating temperature, the carcinogens in the e-cigarette aerosol may surpass the levels of cigarette smoke. Reduced voltage e-cigarettes generate very low levels of formaldehyde. A Public Health England (PHE) report found "At normal settings, there was no or negligible formaldehyde release." However, this statement was contradicted by other researchers in a 2018 study. E-cigarettes can emit formaldehyde at high levels (between five and 15 times higher than what is reported for cigarette smoke) at moderate temperatures and under conditions that have been reported to be non-averse to users. As e-cigarette engineering evolves, the later-generation and "hotter" devices could expose users to greater amounts of carcinogens.

Use

Background

There is a debate on the composition, and the subsequent health burden, of tobacco smoke compared with electronic cigarette vapor. Tobacco smoke is a complex, dynamic and reactive mixture containing around 5,000 chemicals. In 2021, researchers at Johns Hopkins University analyzed the vape aerosols of popular brands such as Juul and Vuse, and found "nearly 2,000 chemicals, the vast majority of which are unidentified." E-cigarette vapor contains many of the known harmful toxicants found in traditional cigarette smoke, such as formaldehyde, cadmium, and lead, though usually at a reduced percentage.

There are substances in e-cigarette vapor that are not found in tobacco smoke. Researchers are part of the conflict, with some opposing and others supporting of e-cigarette use. The public health community is divided, even polarized, over how the use of these devices will impact the tobacco epidemic. Some proponents of e-cigarettes think that these devices contain merely "water vapour" in the e-cigarette aerosols, but this view is refuted by the evidence.

1. Cancer inhalation risk values provide an excess lifetime exposure risk, in this case the human lung cancer risk at a 1 in 100,000 (E-5) level.
2. Noncancer inhalation risk values indicate levels and exposure times at which no adverse effect is expected; here values for continuous lifetime exposure are listed.
3. Unit risk in risk/pCi = 1.08E-08.

Particulate matter

Pathogens

E-liquid used in e-cigarettes have been found to be contaminated with fungi and bacteria. Nicotine-containing e-liquids are extracted from tobacco that may contain impurities. Tobacco-specific impurities such as cotinine, nicotine-N'-oxides (cis and trans isomers), and beta-nornicotyrine are believed to be the result of bacterial action or oxidation during the extracting of nicotine from tobacco.

Re-used vapes, and vape sharing

• Bacterial pneumonia.
• Fungal pneumonia
• Viral pneumonia from vape sharing.
  • SARS-CoV-2: Shared vaping devices are linked to COVID-19.

Chemicals

E-cigarette components include a mouthpiece, a cartridge (liquid storage area), a heating element or atomizer, a microprocessor, a battery, and some of them have a LED light at the tip. They are disposable or reusable devices. Disposable ones are not rechargeable and typically cannot be refilled with a liquid. There are a diverse range of disposable and reusable devices, resulting in broad variations in their structure and their performance. Since many devices include interchangeable components, users have the ability to alter the nature of the inhaled vapor.

For the majority of e-cigarettes many aspects are similar to their traditional counterparts such as giving nicotine to the user. The use of an e-cigarette simulates the action of smoking, with a vapor that somewhat resembles cigarette smoke. E-cigarettes do not involve tobacco combustion, and they do not produce vapor between puffs. They do not produce sidestream smoke or sidestream vapor.

Vapor production basically entails preprocessing, vapor generation, and postprocessing. First, the e-cigarette is activated by pressing a button or other devices switch on by an airflow sensor or other type of trigger sensor. Then, power is released to an LED, other sensors, and other parts of the device, and to a heating element or other kind of vapor generator. Subsequently, the e-liquid flows by capillary action to the heating element or other devices to the e-cigarette vapor generator. Second, the e-cigarette vapor processing entails vapor generation.

The e-cigarette vapor is generated when the e-liquid is vaporized by the heating element or by other mechanical methods. The last step of vapor processing happens as the e-cigarette vapor passes through the main air passage to the user. For some advanced devices, before inhaling, the user can adjust the heating element temperature, air flow rate or other features. The liquid within the chamber of an e-cigarette is heated to roughly 100-250 °C to create an aerosolized vapor. This is thought to result in pyrolysis of the e-liquid and could also lead to decomposition of other liquid ingredients. The aerosol (mist) produced by an e-cigarette is commonly but inaccurately called vapor. In physics, a vapor is a substance in the gas phase whereas an aerosol is a suspension of tiny particles of liquid, solid or both within a gas.

The power output of the e-cigarette is correlated to the voltage and resistance (P = V/R, in watts), which is one aspect that impacts the production and the amount of toxicants of e-cigarette vapors. The power generated by the heating coil is not based solely on the voltage because it also relies upon the current, and the resultant temperature of the e-liquid relies upon the power output of the heating element. The production of vapor also relies upon the boiling point of the solvent. Propylene glycol boils at 188 °C, while glycerin boils at 290 °C. The higher temperature reached by glycerin may impact the toxicants emitted by the e-cigarette. The boiling point for nicotine is 247 °C. Each e-cigarette company's designs generate different amounts of heating power.

The evidence indicates that larger capacity tanks, increasing the coil temperature, and dripping configurations seem to be end user modified designs adopted by e-cigarette companies. Variable voltage e-cigarettes can raise the temperature within the device to allow users to adjust the e-cigarette vapor. No firm information is available on the temperature differences in variable voltage devices. The length of time that the e-cigarette vapor is being heated within the device also affects the e-cigarette vapor properties. When the temperature of the heating element rises, the temperature of the e-cigarette vapor in the air rises. The hotter air can support more e-liquid air density.

E-cigarettes have a wide array of engineering designs. The differences in e-cigarette manufacturing materials are broad and often unknown. Concern exists over lack of quality control. E-cigarette companies often lack manufacturing standards or are non-existent. Some e-cigarettes are designed and manufactured to a high standard. The manufactured standards of e-cigarettes are not equivalent to pharmaceutical products. Improved manufacturing standards could reduce the levels of metals and other chemicals found in e-cigarette vapor. Quality control is influenced by market forces.

The engineering designs typically affect the nature, number, and size of particles generated. High amounts of vapor particle deposition are believed to enter into the lungs with each puff because the particle size in e-cigarette vapors is within the respiratory range. After a puff, the inhaled vapor changes in the size distributions of particles in the lungs. This results in smaller exhaled particles. E-cigarette vapor is made up of fine and ultrafine particles of particulate matter. Vaping generates particulate matter 2.5 μm or less in diameter (PM_2.5), but at notably less concentrations compared to cigarette smoke. Particle concentrations from vaping ranged from 6.6 to 85.0 μg/m.

Particle-size distributions of particulate matter from vaping differ across studies. The longer the puff duration the greater the amount of particles produced. The greater the amount of nicotine in the e-liquid the greater the amount of particles produced. Flavoring does not influence the particle emissions. The various kinds of devices such as cig-a-likes, medium-sized vaporizers, tanks, or mods may function at different voltages and temperatures. Thus, the particle size of the e-cigarette vapor can vary, due to the device used. Comparable to cigarette smoke, the particle size distribution mode of e-cigarette vapor ranged from 120 to 165 nm, with some vaping devices producing more particles than cigarette smoke.

Ingredients

Exactly what the e-cigarette vapor consists of varies in composition and concentration across and within manufacturers. Limited data exists regarding their chemistry. The e-cigarette vapor usually contains propylene glycol, glycerin, nicotine, flavors, aroma transporters, and other substances. The levels of solvents and flavors are not provided on the labels of e-liquids, according to many studies.

The yield of chemicals found in the e-cigarette vapor varies depending on, several factors, including the e-liquid contents, puffing rate, and the battery voltage. A 2017 review found that "Adjusting battery wattage or the inhaled airflow modifies the amount of vapor and chemical density in each puff." A high amount of e-liquid contains propylene glycol and/or glycerin.

Limited but consistent data indicates that flavoring agents are at levels above the National Institute for Occupational Safety and Health safety limit. High amounts of flavoring agents have been found in e-cigarette vapors.

The main chemical found in the e-cigarette vapor was propylene glycol. A 2013 study, under close to real-life conditions in an emission test chamber, using a test subject who took six forceful puffs from an e-cigarette, resulted in a high level of propylene glycol released into the air. The next greatest amount in the e-cigarette vapor was nicotine.

Cig-a-likes are usually first-generation e-cigarettes, tanks are commonly second-generation e-cigarettes, tanks that let vapers adjust the voltage setting are third-generation e-cigarettes, and tanks that have the ability for sub ohm (Ω) vaping and to set temperature control limits are fourth-generation devices. Vaping nicotine using e-cigarettes differs from smoking traditional cigarettes in many ways. First-generation e-cigarettes are often designed to simulate smoking traditional cigarettes; they are low-tech vaporizers with a limited number of settings. First-generation devices usually deliver a smaller amount nicotine. Second-generation and third-generation e-cigarettes use more advanced technology; they have atomizers (i.e., heating coils that convert e-liquids into vapor) which improve nicotine dispersal and house high capacity batteries.

Third-generation and fourth-generation devices represent a diverse set of products and, aesthetically, constitute the greatest departure from the traditional cigarette shape, as many are square or rectangular and feature customizable and rebuildable atomizers and batteries. Cartomizers are similar in design to atomizers; their main difference is a synthetic filler material wrapped around the heating coil. Clearomizers are now commonly available and similar to cartomizers, but they include a clear tank of a larger volume and no filler material; additionally they have a disposable head containing the coil(s) and wicks. Vaping enthusiasts often begin with a cig-a-like first-generation device and tend to move towards using a later-generation device with a larger battery.

Cig-a-likes and tanks are among the most popular devices. But tanks vaporize nicotine more effectively, and there are a greater selection of flavors and levels of nicotine, and are usually used by experienced users. Under five minutes of cig-a-like vaping, blood nicotine levels can elevate to about 5 ng/ml, while under 30 minutes of using 2 mg of nicotine gum, blood nicotine levels ranged from 3–5 ng/ml. Under five minutes of using tank systems by experienced vapers, the elevation in blood nicotine level can be 3–4 times greater.

Many devices lets the user use interchangeable components, which result in variations in the e-cigarette vaporized nicotine. One of the primary features of the more recent generation of devices is that they contain larger batteries and are capable of heating the liquid to a higher temperature, potentially releasing more nicotine, forming additional toxicants, and creating larger clouds of particulate matter. A 2017 review found "Many e-cig users prefer to vape at high temperatures as more aerosol is generated per puff. However, applying a high voltage to a low-resistance heating coil can easily heat e-liquids to temperatures in excess of 300 °C; temperatures sufficient to pyrolyze e-liquid components."

The nicotine levels in the e-cigarette vapor greatly varies across companies. The nicotine levels in the e-cigarette vapor also varies greatly either from puff-to-puff or among devices of the same company. Nicotine intake across users using same device or liquid varies substantially. Puffing characteristics differ between smoking and vaping. Vaping typically require more 'suck' than cigarette smoking. Factors that influence the level of blood nicotine concentrations include nicotine content in a device; how well the nicotine is vapored from the liquid reservoir; and additives that may contribute to nicotine intake. Nicotine intake from vaping also relies upon the habits of the user.

Other factors that influence nicotine intake include engineering designs, battery power, and vapor pH. For instance, some e-cigarettes have e-liquids that contain amounts of nicotine comparable to other companies, though the e-cigarette vapor contains far less amounts of nicotine. Puffing behavior substantially varies. New e-cigarette users tend to take shorter puffs than experienced users which may result in less nicotine intake. Among experienced users there is a wide range in puffing time. Some experienced users may not adapt to increase their puffing time. Inexperienced users vape less forcefully than experienced users.

E-cigarettes share a common design, but construction variations and user alterations generate varied nicotine delivery. Lowering the heater resistance probably increases the nicotine concentration. Some 3.3 V vaping devices using low-resistance heating elements such as an ohm of 1.5, containing 36 mg/mL liquid nicotine can obtain blood nicotine levels after 10 puffs that may be higher than with traditional cigarettes. A 2015 study evaluated "a variety of factors that can influence nicotine yield and found that increasing power output from 3 to 7.5 W (an approximately 2.5-fold increase), by increasing the voltage from 3.3 to 5.2 V, led to an approximately 4- to 5-fold increase in nicotine yield." A 2015 study, using a model to approximate indoor air workplace exposure, anticipates greatly reduced exposure to nicotine from e-cigarettes than traditional cigarettes.

A 2016 World Health Organization (WHO) report found "nicotine in SHA has been found between 10 and 115 times higher than in background air levels." A 2015 Public Health England (PHE) report concluded that e-cigarettes "release negligible levels of nicotine into ambient air". A 2016 Surgeon General of the United States report stated that the exposure to nicotine from e-cigarette vaping is not negligible and is higher than in non-smoking environments. Vaping generates more surrounding air levels of particulate matter and nicotine in indoor areas than background air levels. Extended indoor e-cigarette use in rooms that are not sufficiently ventilated could surpass occupational exposure limits to the inhaled metals.

The e-cigarette vapor may also contain tiny amounts of toxicants, carcinogens, and heavy metals. The majority of toxic chemicals found in e-cigarette vapor are below 1% of the corresponding levels permissible by workplace exposure standards, but the threshold limit values for workplace exposure standards are generally much higher than levels considered satisfactory for outdoor air quality. Some chemicals from exposures to the e-cigarette vapor could be higher than workplace exposure standards. A 2018 PHE report stated that the toxicants found in e-cigarette vapor are less than 5% and the majority are less than 1% in comparison with traditional cigarettes.

Although several studies have found lower levels of carcinogens in e-cigarette aerosol compared to smoke emitted by traditional cigarettes, the mainstream and second-hand e-cigarette aerosol has been found to contain at least ten chemicals that are on California's Proposition 65 list of chemicals known to cause cancer, birth defects, or other reproductive harm, including acetaldehyde, benzene, cadmium, formaldehyde, isoprene, lead, nickel, nicotine, N-Nitrosonornicotine, and toluene. Free radicals produced from frequent e-cigarette use is estimated to be greater than compared to air pollution. E-cigarette vapor can contain a range of toxicants, and since they have been be used in methods unintended by the producer such as dripping or mixing liquids, this could result in generating greater levels of toxicants.

"Dripping", where the liquid is dripped directly onto the atomizer, could yield a higher level of nicotine when the liquid contains nicotine, and also a higher level of chemicals may be generated from heating the other contents of the liquid, including formaldehyde. Dripping may result in higher levels of aldehydes. Considerable pyrolysis might occur during dripping. Emissions of certain compounds increased over time during use as a result of increased residues of polymerization by-products around the coil. As the devices age and get dirty, the constituents they produce may become different. Proper cleaning or more routine replacement of coils may lower emissions by preventing buildup of residual polymers.

E-liquid carrying agents

Glycerin and/or propylene glycol is used in liquid vapes. Vapes for cloud-chasing usually don't contain other ingredients.

Glycerin

Glycerin (often called vegetable glycerin, or VG) was long thought to be a safe option. However, the carcinogen formaldehyde is known as an impurity found in propylene glycol and glycerol vapor degradation.

Propylene glycol

Propylene glycol (often referred to as PG).

Misc

• MCT oil

Flavoring

Flavoring are often added to e-liquids as well as dry smoke blends. There are currently over 7,700 e-liquid flavors available, most have not been laboratory tested for toxicity.

There are numerous flavors (e.g., fruit, vanilla, caramel, coffee) of e-liquid available. There are also flavorings that resemble the taste of cigarettes.

Psychoactive substances

Cannabinoids

CBD is common in vape products. Conversion of CBD to THC can occur when CBD is heated to temperatures between 250–300 °C, potentially leading to its partial transformation into THC. CBD is one among the most suspected ingredients involved in VAPI.

Synthetic cannabinoids are increasingly offered in e-cigarette form as "c-liquid".

Nicotine

E-liquids were purchased from retailers and via online for a 2013 study. The Royal College of General Practitioners stated in 2016 that "To date 42 chemicals have been detected in ENDS aerosol – though with the ENDS market being unregulated there is significant variation between devices and brands."

E-liquid nicotine concentrations vary. The amount of nicotine stated on the labels of e-liquids can be very different from analyzed samples. Some e-liquids sold as nicotine-free contained nicotine, and some of them were at substantial levels. The analyzed liquids nicotine levels were between 14.8 and 87.2 mg/mL and the actual amount varied from the stated amount by as much as 50%.

Possibly, 60–70% of the nicotine is vaporized. E-cigarettes without nicotine is also available. Via nicotine-containing e-cigarettes, nicotine is absorbed through the upper and lower respiratory tract. A greater amount of nicotine is possibly absorbed through oral mucosa and upper airways. The composition of the e-liquid may affect nicotine delivery. E-liquid containing glycerin and propylene glycol delivers nicotine more efficiently than a glycerin-based liquid with the same amount of nicotine. It is believed that propylene glycol vaporizes quicker than glycerin, which subsequently transports a higher amount of nicotine to the user.

Vaping appears to give less nicotine per puff than cigarette smoking. Early devices typically delivered low amounts of nicotine than that of traditional cigarettes, but newer devices containing a high amount of nicotine in the liquid may deliver nicotine at amounts similar to that of traditional cigarettes. Similar to traditional cigarettes, e-cigarettes rapidly delivers nicotine to the brain. The peak concentration of nicotine delivered by e-cigarettes is comparable to that of traditional cigarettes. E-cigarettes take longer to reach peak concentration than with traditional cigarettes, but they provide nicotine to the blood quicker than nicotine inhalers. The yield of nicotine users obtain is similar to that of nicotine inhalers.

Newer e-cigarette models deliver nicotine to the blood quicker than with older devices. E-cigarettes with more powerful batteries can delivery a higher level of nicotine in the e-cigarette vapor. Some research indicates that experienced e-cigarette users can obtain nicotine levels similar to that of smoking. Some vapers can obtain nicotine levels comparable to smoking, and this ability generally improves with experience. E‐cigarettes users still may be able to obtain similar blood nicotine levels compared with traditional cigarettes, particularly with experienced smokers, but it takes more time to obtain such levels.

By-products

Metals and other content

A 2020 systematic review found aluminum, antimony, arsenic, cadmium, cobalt, chromium, copper, iron, lead, manganese, nickel, selenium, tin, and zinc, possibly due to coil contact.

Metal parts of e-cigarettes in contact with the e-liquid can contaminate it. The temperature of the atomizer can reach up to 500 °F. The atomizer contains metals and other parts where the liquid is kept, and an atomizer head is made of a wick and metal coil which heats the liquid. Due to this design, some metals are potentially found in the e-cigarette vapor. E-cigarette devices differ in the amount of metals in the e-cigarette vapor. This may be associated with the age of various cartridges, and also what is contained in the atomizers and coils.

Usage behavior may contribute to variations in the specific metals and amounts of metals found in e-cigarette vapor. An atomizer made of plastics could react with e-liquid and leach plasticizers. The amounts and kinds of metals or other materials found in the e-cigarette vapor is based on the material and other manufacturing designs of the heating element. E-cigarettes devices can be made with ceramics, plastics, rubber, filament fibers, and foams, of which some can be found in the e-cigarette vapor.

E-cigarette parts, including exposed wires, wire coatings, solder joints, electrical connectors, heating element material, and vitreous fiber wick material, account for the second significant source of substances, to which users may be exposed. Metal and silicate particles, some of which are at higher levels than in traditional cigarettes, have been detected in e-cigarette aerosol, resulting from degradation from the metal coil used to heat the solution. Other materials used are Pyrex glass rather than plastics and stainless steel rather than metal alloys.

Metals and metal nanoparticles have been found in tiny amounts in e-cigarette vapor. Aluminum, antimony, barium, boron, cadmium, chromium, copper, iron, lanthanum, lead, magnesium, manganese, mercury, nickel, potassium, silicate, silver, sodium, strontium, tin, titanium, zinc, and zirconium have been found in e-cigarette vapor. Arsenic may leach from the device itself and may end up in the liquid, and then the e-cigarette vapor. Arsenic has been found in some e-liquids, and in e-cigarette vapor.

Considerable differences in exposure to metals have been identified from the e-cigarettes tested, particularly metals such as cadmium, lead, and nickel. Poor quality first-generation e-cigarettes produce several metals in their vapor, in some cases the amounts were greater than with cigarette smoke. A 2013 study found metal particles in the e-cigarette vapor were at concentrations 10-50 times less than permitted in inhalation medicines.

A 2018 study found significantly higher amounts of metals in e-cigarette vapor samples in comparison with the e-liquids before they came in contact with the customized e-cigarettes that were provided by everyday e-cigarette users. Lead and zinc were 2,000% higher and chromium, nickel, and tin were 600% higher. The e-cigarette vapor levels for nickel, chromium, lead, manganese surpassed occupational or environmental standards for at least 50% of the samples. The same study found 10% of the e-liquids tested contained arsenic and the amounts remained about the same as the e-cigarette vapor.

The average amounts of exposure to cadmium from 1,200 e-cigarette puffs were found to be 2.6 times lower than the chronic Permissible Daily Exposure from inhalation medications, outlined by the US Pharmacopeia. One sample tested resulted in daily exposure 10% greater than chronic PDE from inhalation medications, while in four samples the amounts were comparable to outdoor air levels. Cadmium and lead have been found in the e-cigarette vapor at 2–3 times greater levels than with a nicotine inhaler. A 2015 study stated the amount of copper have been found to be six times greater than with cigarette smoke. A 2013 study stated the levels of nickel have been found to be 100 times higher than cigarette smoke.

A 2014 study stated the levels of silver have been found to be at a greater amount than with cigarette smoke. Increased amounts of copper and zinc in vapor generated by some e-cigarettes may be the result of corrosion on the brass electrical connector as indicated in particulates of copper and zinc in e-liquid. In addition, a tin solder joint may be subjected to corrosion, which may result in increased amounts of tin in some e-liquids.

Generally low levels of contaminates may include metals from the heating coils, solders, and wick. The metals nickel, chromium, and copper coated with silver have been used to make the normally thin-wired e-cigarette heating elements. The atomizers and heating coils possibly contain aluminum. They likely account for most of the aluminum in the e-cigarette vapor. The chromium used to make the atomizers and heating coils is probably the origin of the chromium. Copper is commonly used to make atomizers. Atomizers and heating coils commonly contain iron.

Cadmium, lead, nickel, and silver originated from the heating element. Silicate particles may originate from the fiberglass wicks. Silicate nanoparticles have been found in vapors generated from the fiberglass wicks. Tin may originate from the e-cigarette solder joints. Nickel potentially found in the e-cigarette vapor may originate from the atomizer and heating coils. The nanoparticles can be produced by the heating element or by pyrolysis of chemicals directly touching the wire surface.

Chromium, iron, tin, and nickel nanoparticles potentially found in the e-cigarette vapor can originate from the e-cigarette heating coils. Kanthal and nichrome are frequently used heating coils which may account for chromium and nickel in the e-cigarette vapor. Metals can originate from the "cartomizer" from the later-generation devices where an atomizer and cartridge are constructed into one unit. Metal and glass particles can be created and vaporized because of the heating of the liquid with glass fiber.

Solutions

Metal coils coated with microporous ceramic have been developed to protect against oxidation of metals.

Comparison of levels of metals in e-cigarette aerosol

Abbreviations: EC, electronic cigarette; NM, not measured.
∗The findings are a comparison between e-cigarette daily usage and the regulatory limits of chronic Permissible Daily Exposure from inhalation medications outlined by the US Pharmacopeia for cadmium, chromium, copper, lead and nickel, the Minimal Risk Level outlined by the Agency for Toxic Substances and Disease Registry for manganese and the Recommended Exposure Limit outlined by the National Institute for Occupational Safety and Health for aluminum, barium, iron, tin, titanium, zinc and zirconium, referring to a daily inhalation volume of 20 m air and a 10-h volume of 8.3 m; values are in μg.

Carbonyls and other content

E-cigarette makers do not fully disclose information on the chemicals that can be released or synthesized during use. The chemicals in the e-cigarette vapor can be different than with the liquid. Once vaporized, the ingredients in the e-liquid go through chemical reactions that form new compounds not previously found in the liquid. Many chemicals including carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, and glyoxal can inadvertently be produced when the nichrome wire (heating element) that touches the e-liquid is heated and chemically reacted with the liquid. Acrolein and other carbonyls have been found by in e-cigarette vapors that were created by unmodified e-cigarettes, indicating that formation of these compounds could be more common than previously thought.

A 2017 review found "Increasing the battery voltage from 3.3 V to 4.8 V doubles the amount of e-liquid vapourized and increases the total aldehyde generation more than threefold, with acrolein emission increasing tenfold." A 2014 study stated that "increasing the voltage from 3.2–4.8 V resulted in a 4 to >200 times increase in the formaldehyde, acetaldehyde, and acetone levels". The amount of carbonyl compounds in e-cigarette aerosols varies substantially, not only among different brands but also among different samples of the same products, from 100-fold less than tobacco to nearly equivalent values.

The propylene glycol-containing liquids produced the most amounts of carbonyls in e-cigarette aerosols. Propylene glycol could turn into propylene oxide when heated and aerosolized. Glycerin may generate acrolein when heated at hotter temperatures. Some e-cigarette products had acrolein identified in the e-cigarette vapor, at greatly lower amounts than in cigarette smoke. Several e-cigarette companies have replaced glycerin and propylene glycol with ethylene glycol. In 2014, most e-cigarettes companies began to use water and glycerin as replacement for propylene glycol.

In 2015, manufacturers attempted to reduce the formation of formaldehyde and metal substances of the e-cigarette vapor by producing an e-liquid in which propylene glycol is replaced by glycerin. Acetol, beta-nicotyrine, butanal, crotonaldehyde, glyceraldehyde, glycidol, glyoxal, dihydroxyacetone, dioxolanes, lactic acid, methylglyoxal, myosmine, oxalic acid, propanal, pyruvic acid, and vinyl alcohol isomers have been found in the e-cigarette vapor. Hydroxymethylfurfural and furfural have been found in the e-cigarette vapors. The amounts of furans in the e-cigarette vapors were highly associated with power of the e-cigarette and amount of sweetener.

The amount of carbonyls vary greatly among different companies and within various samples of the same e-cigarettes. Oxidants and reactive oxygen species (OX/ROS) have been found in the e-cigarette vapor. OX/ROS could react with other chemicals in the e-cigarette vapor because they are highly reactive, causing alterations its chemical composition. E-cigarette vapor have been found to contain OX/ROS at about 100 times less than with cigarette smoke. A 2018 review found e-cigarette vapor containing reactive oxygen radicals seem to be similar to levels in traditional cigarettes. Glyoxal and methylglyoxal found in e-cigarette vapors are not found in cigarette smoke.

Contamination with various chemicals have been identified. Some products contained trace amounts of the drugs tadalafil and rimonabant. The amount of either of these substances that is able to transfer from liquid to vapor phase is low.

The nicotine impurities in the e-liquid varies greatly across companies. The levels of toxic chemicals in e-cigarette vapor is in some cases similar to that of nicotine replacement products. Tobacco-specific nitrosamines (TSNAs) such as nicotine-derived nitrosamine ketone (NNK) and N-Nitrosonornicotine (NNN) and tobacco-specific impurities have been found in the e-cigarette vapor at very low levels, comparable to amounts found in nicotine replacement products. A 2014 study that tested 12 e-cigarette devices found that most of them contained tobacco-specific nitrosamines in the e-cigarette vapor. In contrast, the one nicotine inhaler tested did not contain tobacco-specific nitrosamines.

N-Nitrosoanabasine and N'-Nitrosoanatabine have been found in the e-cigarette vapor at lower levels than cigarette smoke. Tobacco-specific nitrosamines (TSNAs), nicotine-derived nitrosamine ketone (NNK), N-Nitrosonornicotine (NNN), and N′-nitrosoanatabine have been found in the e-cigarette vapor at different levels between different devices. Since e-liquid production is not rigorously regulated, some e-liquids can have amounts of impurities higher compared to limits for pharmaceutical-grade nicotine products.

m-Xylene, p-Xylene, o-Xylene, ethyl acetate, ethanol, methanol, pyridine, acetylpyrazine, 2,3,5-trimethylpyrazine, octamethylcyclotetrasiloxane, catechol, m-Cresol, and o-Cresol have been found in the e-cigarette vapor. A 2017 study found that "The maximum detected concentrations of benzene, methanol, and ethanol in the samples were higher than their authorized maximum limits as residual solvents in pharmaceutical products." Trace amounts of toluene and xylene have been found in the e-cigarette vapor.

Polycyclic aromatic hydrocarbons (PAHs), aldehydes, volatile organic compounds (VOCs), phenolic compounds, flavors, tobacco alkaloids, o-Methyl benzaldehyde, 1-Methyl phenanthrene, anthracene, phenanthrene, pyrene, and cresol have been found in the e-cigarette vapor. While the cause of these differing concentrations of minor tobacco alkaloids is unknown, Lisko and colleagues (2015) speculated potential reasons may derive from the e-liquid extraction process (i.e., purification and manufacturing) used to obtain nicotine from tobacco, as well as poor quality control of e-liquid products. In some studies, small quantities of VOCs including styrene have been found in the e-cigarette vapor. A 2014 study found the amounts of PAHs were above specified safe exposure limits.

Low levels of isoprene, acetic acid, 2-butanodione, acetone, propanol, and diacetin, and traces of apple oil (3-methylbutyl-3-methylbutanoate) have been found in the e-cigarette vapor. Flavoring substances from roasted coffee beans have been found in the e-cigarette vapor. The aroma chemicals acetamide and cumarine have been found in the e-cigarette vapor. Acrylonitrile and ethylbenzene have been found in the e-cigarette vapor. Benzene and 1,3-Butadiene have been found in the e-cigarette vapor at many-fold lower than in cigarette smoke.

Some e-cigarettes contain diacetyl and acetaldehyde in the e-cigarette vapor. Diacetyl and acetylpropionyl have been found at greater levels in the e-cigarette vapor than is accepted by the National Institute for Occupational Safety and Health, although diacetyl and acetylpropionyl are normally found at lower levels in e-cigarettes than with traditional cigarettes. A 2018 PHE report stated that diacetyl was identified at hundreds of times in lesser amounts than found in cigarette smoke. A 2016 WHO report found that acetaldehyde from second-hand vapor was between two and eight times greater compared to background air levels.

Formaldehyde

A 2016 WHO report found that formaldehyde from second-hand vapor was around 20% greater compared to background air levels. Normal usage of e-cigarettes generates very low levels of formaldehyde. Different power settings reached significant differences in the amount of formaldehyde in the e-cigarette vapor across different devices. Later-generation e-cigarette devices can create greater amounts of carcinogens. Some later-generation e-cigarettes let users increase the volume of vapor by adjusting the battery output voltage.

Depending on the heating temperature, the carcinogens in the e-cigarette vapor may surpass the levels of cigarette smoke. E-cigarettes devices using higher voltage batteries can produce carcinogens including formaldehyde at levels comparable to cigarette smoke. The later-generation and "tank-style" devices with higher voltages (5.0 V) could produce formaldehyde at comparable or greater levels than in cigarette smoke.

A 2015 study hypothesized from the data that at high voltage (5.0 V), a user, "vaping at a rate of 3 mL/day, would inhale 14.4 ± 3.3 mg of formaldehyde per day in formaldehyde-releasing agents." The 2015 study used a puffing machine showed that a third-generation e-cigarette turned on to the maximum setting would create levels of formaldehyde between five and 15 times greater than with cigarette smoke. A 2015 PHE report found that high levels of formaldehyde only occurred in overheated "dry-puffing", and that "dry puffs are aversive and are avoided rather than inhaled", and "At normal settings, there was no or negligible formaldehyde release."

A 2018 study confirmed e-cigarettes can emit formaldehyde at high levels more than 5 times higher than what is reported for cigarette smoke) at moderate temperatures and under conditions that have been reported to be non-averse to users. But e-cigarette users may "learn" to overcome the unpleasant taste due to elevated aldehyde formation, when the nicotine craving is high enough. High voltage e-cigarettes are capable of producing large amounts of carbonyls. Reduced voltage (3.0 V) e-cigarettes had e-cigarette aerosol levels of formaldehyde and acetaldehyde roughly 13 and 807-fold less than with cigarette smoke.

Chemical analysis of e-cigarette cartridges, solutions, and aerosol

Abbreviations: TSNA, tobacco specific nitrosoamines; LC-MS, liquid chromatography-mass spectrometry; MAO-A and B, monoamineoxidase A and B; PAH, polycyclic aromatic hydrocarbons; GS-MS, gas chromatography – mass spectrometry; ICP-MS, inductively coupled plasma – mass spectrometry; CO, carbon monoxide, VOC, volatile organic compounds; UPLC-MS, ultra-performance liquid chromatography-mass spectrometry; HPLC-DAD-MMI-MS, high performance liquid chromatography-diode array detector-multi-mode ionization-mass spectrometry.

Aldehydes in e-cigarette aerosol

∗Abbreviations: <LOQ, below the limit of quantitation but above the limit of detection; N.D., not detected; N.T., not tested.

Tobacco-specific nitrosamines in nicotine-containing products

∗ng/g, but not for gum and patch. ng/gum piece is for gum and ng/patch is for patch.

Comparison of levels of toxicants in e-cigarette aerosol

Abbreviations: μg, microgram; ng, nanogram; ND, not detected.
∗Fifteen puffs were chosen to estimate the nicotine delivery of one traditional cigarette.

Each e-cigarette cartridge, which varies across manufacturers, and each cartridge produces 10 to 250 puffs of vapor. This correlates to 5 to 30 traditional cigarettes. A puff usually lasts for 3 to 4 seconds. A 2014 study found there is wide differences in daily puffs in experienced vapers, which typically varies from 120 to 225 puffs per day. From puff-to-puff e-cigarettes do not provide as much nicotine as traditional cigarettes. A 2016 review found "The nicotine contained in the aerosol from 13 puffs of an e-cigarette in which the nicotine concentration of the liquid is 18 mg per milliliter has been estimated to be similar to the amount in the smoke of a typical tobacco cigarette, which contains approximately 0.5 mg of nicotine."

See also

• Chemical pneumonitis
• Composition of heated tobacco product emissions
• Adverse effects of electronic cigarettes
• List of additives in cigarettes
• List of cigarette smoke carcinogens
• Safety of electronic cigarettes
• Vaping-associated pulmonary injury

Notes

1. A 2014 review found "Wide ranges in the levels of chemical substances such as tobacco-specific nitrosamines, aldehydes, metals, volatile organic compounds, phenolic compounds, polycyclic aromatic hydrocarbons, flavours, solvent carriers, tobacco alkaloids and drugs have been reported in e-cigarette refill solutions, cartridges, aerosols and environmental emissions."
2. A 2014 review found "there is enough heat generated during puffing to cause the fluid to decompose and/or components of the device to pyrolyze, whereby toxic/carcinogenic substances may be formed."
3. The term vapor is a misnomer due to the fact that the aerosol generated by e-cigarettes has both a particulate and gas phase.
4. E-cigarette aerosol is composed of droplets of e-liquids, which contain mainly propylene glycol, glycerin, nicotine, water, flavorings (if added to e-liquid), preservatives and also small amounts of by-products of thermal decomposition of some of these constituents.
5. A 2017 review found "The physical composition of the aerosol can be altered by many factors: the temperature of the metal coil, rate of e-liquid flow through the heated coil, chemical composition of the coil, the coil connection to the power source, the wicking material transporting e-liquid and the hot aerosol contacts."
6. A 2017 review found "As e-cig metal components undergo repeated cycles of heating and cooling, traces of these metal components can leech into the e-liquid, causing the device to emit metallic nanoparticles."
7. The activity of puffing an aerosolized liquid and then exhaling it is known as "vaping".
8. Horiba states, "The mode is the peak of the frequency distribution, or it may be easier to visualize it as the highest peak seen in the distribution. The mode represents the particle size (or size range) most commonly found in the distribution."
9. The user is referred to as a "vaper."
10. The presence of new chemicals are formed from the heating process and the e-liquid flavoring.
11. A 2017 review found "When heated to high temperatures, as can occur with the use of advanced EC devices, propylene glycol can form thermal dehydration products such as acetaldehyde, formaldehyde, and propylene oxide."
12. A 2017 review found "Thermal decomposition of e-cigarette solvents results in release of toxic metals, and formation of an array of organic compounds such as acrolein from glycerol, and propylene oxide from propylene glycol."

Bibliography

• McNeill, A; Brose, LS; Calder, R; Bauld, L; Robson, D (February 2018). "Evidence review of e-cigarettes and heated tobacco products 2018" (PDF). UK: Public Health England. pp. 1–243.
• Stratton, Kathleen; Kwan, Leslie Y.; Eaton, David L. (January 2018). Stratton, Kathleen; Kwan, Leslie Y.; Eaton, David L. (eds.). Public Health Consequences of E-Cigarettes (PDF). National Academies of Sciences, Engineering, and Medicine (National Academies Press). pp. 1–774. doi:10.17226/24952. ISBN 978-0-309-46834-3. PMID 29894118.
• McNeill, A; Brose, LS; Calder, R; Hitchman, SC; Hajek, P; McRobbie, H (August 2015). "E-cigarettes: an evidence update" (PDF). UK: Public Health England. pp. 1–113.
• "Electronic Nicotine Delivery Systems and Electronic Non-Nicotine Delivery Systems (ENDS/ENNDS)" (PDF). World Health Organization WHO. August 2016. pp. 1–11.
• Wilder, Natalie; Daley, Claire; Sugarman, Jane; Partridge, James (April 2016). "Nicotine without smoke: Tobacco harm reduction". UK: Royal College of Physicians. pp. 1–191.
• "State Health Officer's Report on E-Cigarettes: A Community Health Threat" (PDF). California Tobacco Control Program. California Department of Public Health. January 2015. pp. 1–21. This article incorporates text from this source, which is in the public domain.

References

1. ^ Cheng, T. (2014). "Chemical evaluation of electronic cigarettes". Tobacco Control. 23 (Supplement 2): ii11–ii17. doi:10.1136/tobaccocontrol-2013-051482. ISSN 0964-4563. PMC 3995255. PMID 24732157.
2. "Johns Hopkins Finds Thousands of Unknown Chemicals in E-Cigarettes". Johns Hopkins. October 8, 2021. Retrieved April 13, 2022.
3. ^ Pisinger, Charlotta; Døssing, Martin (December 2014). "A systematic review of health effects of electronic cigarettes". Preventive Medicine. 69: 248–260. doi:10.1016/j.ypmed.2014.10.009. PMID 25456810.
4. ^ Rowell, Temperance R.; Tarran, Robert (2015). "Will Chronic E-Cigarette Use Cause Lung Disease?". American Journal of Physiology. Lung Cellular and Molecular Physiology. 309 (12): L1398–L1409. doi:10.1152/ajplung.00272.2015. ISSN 1040-0605. PMC 4683316. PMID 26408554.
5. ^ Bertholon JF, Becquemin MH, Annesi-Maesano I, Dautzenberg B (2013). "Electronic Cigarettes: A Short Review". Respiration. 86 (5): 433–8. doi:10.1159/000353253. ISSN 1423-0356. PMID 24080743.
6. ^ Orellana-Barrios, Menfil A.; Payne, Drew; Mulkey, Zachary; Nugent, Kenneth (2015). "Electronic cigarettes-a narrative review for clinicians". The American Journal of Medicine. 128 (7): 674–681. doi:10.1016/j.amjmed.2015.01.033. ISSN 0002-9343. PMID 25731134.
7. ^ Ebbert, Jon O.; Agunwamba, Amenah A.; Rutten, Lila J. (2015). "Counseling Patients on the Use of Electronic Cigarettes". Mayo Clinic Proceedings. 90 (1): 128–134. doi:10.1016/j.mayocp.2014.11.004. ISSN 0025-6196. PMID 25572196.
8. ^ Caponnetto, Pasquale; Campagna, Davide; Papale, Gabriella; Russo, Cristina; Polosa, Riccardo (2012). "The emerging phenomenon of electronic cigarettes". Expert Review of Respiratory Medicine. 6 (1): 63–74. doi:10.1586/ers.11.92. ISSN 1747-6348. PMID 22283580. S2CID 207223131.
9. ^ Peterson, Lisa A.; Hecht, Stephen S. (2017). "Tobacco, e-cigarettes, and child health". Current Opinion in Pediatrics. 29 (2): 225–230. doi:10.1097/MOP.0000000000000456. ISSN 1040-8703. PMC 5598780. PMID 28059903.
10. ^ "Supporting regulation of electronic cigarettes". www.apha.org. US: American Public Health Association. 18 November 2014.
11. Sosnowski, Tomasz R.; Odziomek, Marcin (2018). "Particle Size Dynamics: Toward a Better Understanding of Electronic Cigarette Aerosol Interactions With the Respiratory System". Frontiers in Physiology. 9: 853. doi:10.3389/fphys.2018.00853. ISSN 1664-042X. PMC 6046408. PMID 30038580. This article incorporates text by Tomasz R. Sosnowski and Marcin Odziomek available under the CC BY 4.0 license.
12. ^ Hajek P, Etter JF, Benowitz N, Eissenberg T, McRobbie H (31 July 2014). "Electronic cigarettes: review of use, content, safety, effects on smokers and potential for harm and benefit". Addiction. 109 (11): 1801–10. doi:10.1111/add.12659. PMC 4487785. PMID 25078252.
13. ^ Schick, Suzaynn F.; Blount, Benjamin C.; Jacob, Peyton; Saliba, Najat A.; Bernert, John T.; El Hellani, Ahmad; Jatlow, Peter; Pappas, R. Steve; Wang, Lanqing; Foulds, Jonathan; Ghosh, Arunava; Hecht, Stephen S.; Gomez, John C; Martin, Jessica R.; Mesaros, Clementina; Srivastava, Sanjay; St. Helen, Gideon; Tarran, Robert; Lorkiewicz, Pawel K.; Blair, Ian A.; Kimmel, Heather L.; Doerschuk, Claire M.; Benowitz, Neal L.; Bhatnagar, Aruni (2017). "Biomarkers of Exposure to New and Emerging Tobacco and Nicotine Delivery Products". American Journal of Physiology. Lung Cellular and Molecular Physiology. 313 (3): L425–L452. doi:10.1152/ajplung.00343.2016. ISSN 1040-0605. PMC 5626373. PMID 28522563.
14. ^ Kim, Ki-Hyun; Kabir, Ehsanul; Jahan, Shamin Ara (2016). "Review of electronic cigarettes as tobacco cigarette substitutes: their potential human health impact". Journal of Environmental Science and Health, Part C. 34 (4): 262–275. Bibcode:2016JESHC..34..262K. doi:10.1080/10590501.2016.1236604. ISSN 1059-0501. PMID 27635466. S2CID 42660975.
15. ^ Farsalinos KE, Polosa R (2014). "Safety evaluation and risk assessment of electronic cigarettes as tobacco cigarette substitutes: a systematic review". Therapeutic Advances in Drug Safety. 5 (2): 67–86. doi:10.1177/2042098614524430. ISSN 2042-0986. PMC 4110871. PMID 25083263.
16. ^ Chun, Lauren F.; Moazed, Farzad; Calfee, Carolyn S.; Matthay, Michael A.; Gotts, Jeffrey Earl (2017). "Pulmonary Toxicity of E-cigarettes". American Journal of Physiology. Lung Cellular and Molecular Physiology. 313 (2): L193–L206. doi:10.1152/ajplung.00071.2017. ISSN 1040-0605. PMC 5582932. PMID 28522559.
17. ^ Cooke, Andrew; Fergeson, Jennifer; Bulkhi, Adeeb; Casale, Thomas B. (2015). "The Electronic Cigarette: The Good, the Bad, and the Ugly". The Journal of Allergy and Clinical Immunology: In Practice. 3 (4): 498–505. doi:10.1016/j.jaip.2015.05.022. ISSN 2213-2198. PMID 26164573.
18. ^ Bekki, Kanae; Uchiyama, Shigehisa; Ohta, Kazushi; Inaba, Yohei; Nakagome, Hideki; Kunugita, Naoki (2014). "Carbonyl Compounds Generated from Electronic Cigarettes". International Journal of Environmental Research and Public Health. 11 (11): 11192–11200. doi:10.3390/ijerph111111192. ISSN 1660-4601. PMC 4245608. PMID 25353061.
19. ^ Oh, Anne Y.; Kacker, Ashutosh (December 2014). "Do electronic cigarettes impart a lower potential disease burden than conventional tobacco cigarettes?: Review on e-cigarette vapor versus tobacco smoke". The Laryngoscope. 124 (12): 2702–2706. doi:10.1002/lary.24750. PMID 25302452. S2CID 10560264.
20. ^ McNeill 2015, p. 77.
21. ^ Salamanca, J. C.; Meehan-Atrash, J.; Vreeke, S.; Escobedo, J. O.; Peyton, D. H.; Strongin, R. M. (May 15, 2018). "E-cigarettes can emit formaldehyde at high levels under conditions that have been reported to be non-averse to users". Scientific Reports. 8 (1): 7559. Bibcode:2018NatSR...8.7559S. doi:10.1038/s41598-018-25907-6. PMC 5954153. PMID 29765089.
22. Brown, Christopher J; Cheng, James M (2014). "Figure 2: Basic e-cigarette operation". Tobacco Control. 23 (suppl 2): ii4–ii10. doi:10.1136/tobaccocontrol-2013-051476. ISSN 0964-4563. PMC 3995271. PMID 24732162.
23. Talhout, Reinskje; Schulz, Thomas; Florek, Ewa; Van Benthem, Jan; Wester, Piet; Opperhuizen, Antoon (2011). "Hazardous Compounds in Tobacco Smoke". International Journal of Environmental Research and Public Health. 8 (12): 613–628. doi:10.3390/ijerph8020613. ISSN 1660-4601. PMC 3084482. PMID 21556207. This article incorporates text by Reinskje Talhout, Thomas Schulz, Ewa Florek, Jan van Benthem, Piet Wester, and Antoon Opperhuizen available under the CC BY 3.0 license.
24. "Johns Hopkins Finds Thousands of Unknown Chemicals in E-Cigarettes". Johns Hopkins. October 8, 2021. Retrieved April 13, 2022.
25. Perikleous, Evanthia P.; Steiropoulos, Paschalis; Paraskakis, Emmanouil; Constantinidis, Theodoros C.; Nena, Evangelia (2018). "E-Cigarette Use Among Adolescents: An Overview of the Literature and Future Perspectives". Frontiers in Public Health. 6: 86. doi:10.3389/fpubh.2018.00086. ISSN 2296-2565. PMC 5879739. PMID 29632856. This article incorporates text by Evanthia P. Perikleous, Paschalis Steiropoulos, Emmanouil Paraskakis, Theodoros C. Constantinidis, and Evangelia Nena available under the CC BY 4.0 license.
26. Wilder 2016, p. 127.
27. Wagener, Theodore L.; Meier, Ellen; Tackett, Alayna P.; Matheny, James D.; Pechacek, Terry F. (2016). "A Proposed Collaboration Against Big Tobacco: Common Ground Between the Vaping and Public Health Community in the United States". Nicotine & Tobacco Research. 18 (5): 730–736. doi:10.1093/ntr/ntv241. ISSN 1462-2203. PMC 6959509. PMID 26508399.
28. MacDonald, Marjorie; O'Leary, Renee; Stockwell, Tim; Reist, Dan (2016). "Clearing the air: protocol for a systematic meta-narrative review on the harms and benefits of e-cigarettes and vapour devices". Systematic Reviews. 5 (1): 85. doi:10.1186/s13643-016-0264-y. ISSN 2046-4053. PMC 4875675. PMID 27209032. This article incorporates text by Marjorie MacDonald, Renee O'Leary, Tim Stockwell, and Dan Reist available under the CC BY 4.0 license.
29. ^ Kaur, Gagandeep; Pinkston, Rakeysha; Mclemore, Benathel; Dorsey, Waneene C.; Batra, Sanjay (2018). "Immunological and toxicological risk assessment of e-cigarettes". European Respiratory Review. 27 (147): 170119. doi:10.1183/16000617.0119-2017. ISSN 0905-9180. PMC 9489161. PMID 29491036.
30. Talhout, Reinskje; Schulz, Thomas; Florek, Ewa; Van Benthem, Jan; Wester, Piet; Opperhuizen, Antoon (2011). "Table 1: List of hazardous tobacco smoke components with their cancer and non-cancer inhalation risk values". International Journal of Environmental Research and Public Health. 8 (12): 613–628. doi:10.3390/ijerph8020613. ISSN 1660-4601. PMC 3084482. PMID 21556207. This article incorporates text by Reinskje Talhout, Thomas Schulz, Ewa Florek, Jan van Benthem, Piet Wester, and Antoon Opperhuizen available under the CC BY 3.0 license.
31. ^ Schraufnagel DE (2015). "Electronic Cigarettes: Vulnerability of Youth". Pediatr Allergy Immunol Pulmonol. 28 (1): 2–6. doi:10.1089/ped.2015.0490. PMC 4359356. PMID 25830075.
32. ^ Famele M, Ferranti C, Abenavoli C, Palleschi L, Mancinelli R, Draisci R (2014). "The Chemical Components of Electronic Cigarette Cartridges and Refill Fluids: Review of Analytical Methods". Nicotine & Tobacco Research. 17 (3): 271–279. doi:10.1093/ntr/ntu197. ISSN 1462-2203. PMC 5479507. PMID 25257980.
33. ^ Kooragayalu, S; El-Zarif, S; Jariwala, S (2020). "Vaping Associated Pulmonary Injury (VAPI) with superimposed Mycoplasma pneumoniae infection". Respiratory Medicine Case Reports. 29: 100997. doi:10.1016/j.rmcr.2020.100997. PMC 6997893. PMID 32042584.
34. "Vaping changes oral microbiome and raises infection risk". www.medicalnewstoday.com. 14 March 2020.
35. Mughal, Mohsin Sheraz; Dalmacion, Denise Lauren V.; Mirza, Hasan Mahmood; Kaur, Ikwinder Preet; Dela Cruz, Maria Amanda; Kramer, Violet E. (1 January 2020). "E-cigarette or vaping product use associated lung injury, (EVALI) - A diagnosis of exclusion". Respiratory Medicine Case Reports. 31: 101174. doi:10.1016/j.rmcr.2020.101174. PMC 7394920. PMID 32775191. S2CID 221007822.
36. Brar, E; Saxena, A; Dukler, C; Xu, F; Saxena, D; Cheema Brar, P; Guo, Y; Li, X (2021). "Vaping, SARS-CoV-2, and Multisystem Inflammatory Syndrome: A Perfect Storm". Frontiers in Pediatrics. 9: 647925. doi:10.3389/fped.2021.647925. PMC 8149601. PMID 34055688.
37. Hassoun, A; Brady, K; Arefi, R; Trifonova, I; Tsirilakis, K (April 2021). "Vaping-Associated Lung Injury During COVID-19 Multisystem Inflammatory Syndrome Outbreak". The Journal of Emergency Medicine. 60 (4): 524–530. doi:10.1016/j.jemermed.2020.12.005. PMC 7732222. PMID 33483200.
38. Pitlick, MM; Lang, DK; Meehan, AM; McCoy, CP (June 2021). "EVALI: A Mimicker of COVID-19". Mayo Clinic Proceedings. Innovations, Quality & Outcomes. 5 (3): 682–687. doi:10.1016/j.mayocpiqo.2021.03.002. PMC 8006188. PMID 33817560.
39. "Purdue students sharing vaping devices spread COVID-19". WLFI News. Archived from the original on 2021-11-22. Retrieved 2022-12-21.
40. "Electronic Cigarette Fires and Explosions in the United States 2009 - 2016" (PDF). United States Fire Administration. July 2017. pp. 1–56. This article incorporates text from this source, which is in the public domain.
41. ^ Brown, Christopher J; Cheng, James M (2014). "Electronic cigarettes: product characterisation and design considerations". Tobacco Control. 23 (suppl 2): ii4–ii10. doi:10.1136/tobaccocontrol-2013-051476. ISSN 0964-4563. PMC 3995271. PMID 24732162.
42. Barraza, Leila F.; Weidenaar, Kim E.; Cook, Livia T.; Logue, Andrea R.; Halpern, Michael T. (2017). "Regulations and policies regarding e-cigarettes". Cancer. 123 (16): 3007–3014. doi:10.1002/cncr.30725. ISSN 0008-543X. PMID 28440949.
43. ^ Breland, Alison; Soule, Eric; Lopez, Alexa; Ramôa, Carolina; El-Hellani, Ahmad; Eissenberg, Thomas (2017). "Electronic cigarettes: what are they and what do they do?". Annals of the New York Academy of Sciences. 1394 (1): 5–30. Bibcode:2017NYASA1394....5B. doi:10.1111/nyas.12977. ISSN 0077-8923. PMC 4947026. PMID 26774031.
44. ^ Offermann, Francis (June 2014). "The Hazards of E-Cigarettes" (PDF). ASHRAE Journal. 56 (6).
45. ^ Naik, Pooja; Cucullo, Luca (2015). "Pathobiology of tobacco smoking and neurovascular disorders: untied strings and alternative products". Fluids and Barriers of the CNS. 12 (1): 25. doi:10.1186/s12987-015-0022-x. ISSN 2045-8118. PMC 4628383. PMID 26520792.
46. Tomashefski, Amy (2016). "The perceived effects of electronic cigarettes on health by adult users: A state of the science systematic literature review". Journal of the American Association of Nurse Practitioners. 28 (9): 510–515. doi:10.1002/2327-6924.12358. ISSN 2327-6886. PMID 26997487. S2CID 42900184.
47. ^ Biyani, S; Derkay, CS (28 April 2015). "E-cigarettes: Considerations for the otolaryngologist". International Journal of Pediatric Otorhinolaryngology. 79 (8): 1180–1183. doi:10.1016/j.ijporl.2015.04.032. PMID 25998217.
48. "WMA Statement on Electronic Cigarettes and Other Electronic Nicotine Delivery Systems". World Medical Association. Archived from the original on 2015-12-08. Retrieved 2019-02-11.
49. "Electronic Cigarettes – An Overview" (PDF). German Cancer Research Center. 2013. p. 4.
50. "Position Statement on Electronic Cigarettes" (PDF). Cancer Society of New Zealand. Archived from the original (PDF) on 7 November 2014. Retrieved 6 November 2014.
51. ^ Wilder 2016, p. 83.
52. ^ Bullen, Chris; Knight-West, Oliver (2016). "E-cigarettes for the management of nicotine addiction". Substance Abuse and Rehabilitation. 7: 111–118. doi:10.2147/SAR.S94264. ISSN 1179-8467. PMC 4993405. PMID 27574480.
53. ^ Grana R, Benowitz N, Glantz SA (13 May 2014). "E-cigarettes: a scientific review". Circulation. 129 (19): 1972–86. doi:10.1161/circulationaha.114.007667. PMC 4018182. PMID 24821826.
54. Morjaria, Jaymin; Mondati, Enrico; Polosa, Riccardo (2017). "E-cigarettes in patients with COPD: current perspectives". International Journal of Chronic Obstructive Pulmonary Disease. 12: 3203–3210. doi:10.2147/COPD.S135323. ISSN 1178-2005. PMC 5677304. PMID 29138548.
55. ^ Fernández, Esteve; Ballbè, Montse; Sureda, Xisca; Fu, Marcela; Saltó, Esteve; Martínez-Sánchez, Jose M. (2015). "Particulate Matter from Electronic Cigarettes and Conventional Cigarettes: a Systematic Review and Observational Study". Current Environmental Health Reports. 2 (4): 423–429. doi:10.1007/s40572-015-0072-x. ISSN 2196-5412. PMID 26452675.
56. Callahan-Lyon, Priscilla (2014). "Electronic cigarettes: human health effects". Tobacco Control. 23 (suppl 2): ii36–ii40. doi:10.1136/tobaccocontrol-2013-051470. ISSN 0964-4563. PMC 3995250. PMID 24732161.
57. "Understanding and Interpreting Particle Size Distribution Calculations". Horiba. 2016.
58. Zborovskaya Y (2017). "E-Cigarettes and Smoking Cessation: A Primer for Oncology Clinicians". Clin J Oncol Nurs. 21 (1): 54–63. doi:10.1188/17.CJON.54-63. PMID 28107337. S2CID 206992720.
59. ^ Clapp, Phillip W.; Jaspers, Ilona (2017). "Electronic Cigarettes: Their Constituents and Potential Links to Asthma". Current Allergy and Asthma Reports. 17 (11): 79. doi:10.1007/s11882-017-0747-5. ISSN 1529-7322. PMC 5995565. PMID 28983782.
60. Konstantinos Farsalinos (2015). "Electronic cigarette evolution from the first to fourth-generation and beyond" (PDF). gfn.net.co. Global Forum on Nicotine. p. 23. Archived from the original (PDF) on 2015-07-08. Retrieved 2019-02-11.
61. ^ Giroud, Christian; de Cesare, Mariangela; Berthet, Aurélie; Varlet, Vincent; Concha-Lozano, Nicolas; Favrat, Bernard (2015). "E-Cigarettes: A Review of New Trends in Cannabis Use". International Journal of Environmental Research and Public Health. 12 (8): 9988–10008. doi:10.3390/ijerph120809988. ISSN 1660-4601. PMC 4555324. PMID 26308021. This article incorporates text by Christian Giroud, Mariangela de Cesare, Aurélie Berthet, Vincent Varlet, Nicolas Concha-Lozano, and Bernard Favrat available under the CC BY 4.0 license.
62. ^ "E-Cigarette Use Among Youth and Young Adults: A Report of the Surgeon General" (PDF). United States Department of Health and Human Services. Surgeon General of the United States. 2016. pp. 1–298. This article incorporates text from this source, which is in the public domain.
63. Yingst JM, Veldheer S, Hrabovsky S, Nichols TT, Wilson SJ, Foulds J (2015). "Factors associated with electronic cigarette users' device preferences and transition from first generation to advanced generation devices". Nicotine Tob Res. 17 (10): 1242–1246. doi:10.1093/ntr/ntv052. ISSN 1462-2203. PMC 4592341. PMID 25744966.
64. ^ McNeill 2015, p. 71.
65. ^ England, Lucinda (2015). "Important Considerations for Providers Regarding the Use of Electronic Cigarettes". International Journal of Respiratory and Pulmonary Medicine. 2 (4). doi:10.23937/2378-3516/1410035. ISSN 2378-3516. This article incorporates text by Lucinda England, Joseph G. Lisko, and R. Steven Pappas available under the CC BY 4.0 license.
66. ^ Fagerström, Karl Olov; Bridgman, Kevin (2014). "Tobacco harm reduction: The need for new products that can compete with cigarettes". Addictive Behaviors. 39 (3): 507–511. doi:10.1016/j.addbeh.2013.11.002. ISSN 0306-4603. PMID 24290207.
67. ^ Breland, Alison B.; Spindle, Tory; Weaver, Michael; Eissenberg, Thomas (2014). "Science and Electronic Cigarettes". Journal of Addiction Medicine. 8 (4): 223–233. doi:10.1097/ADM.0000000000000049. ISSN 1932-0620. PMC 4122311. PMID 25089952.
68. Lauterstein, Dana; Hoshino, Risa; Gordon, Terry; Watkins, Beverly-Xaviera; Weitzman, Michael; Zelikoff, Judith (2014). "The Changing Face of Tobacco Use Among United States Youth". Current Drug Abuse Reviews. 7 (1): 29–43. doi:10.2174/1874473707666141015220110. ISSN 1874-4737. PMC 4469045. PMID 25323124.
69. Hayden McRobbie (2014). "Electronic cigarettes" (PDF). National Centre for Smoking Cessation and Training. p. 8.
70. ^ Brandon TH, Goniewicz ML, Hanna NH, Hatsukami DK, Herbst RS, Hobin JA, Ostroff JS, Shields PG, Toll BA, Tyne CA, Viswanath K, Warren GW (2015). "Electronic Nicotine Delivery Systems: A Policy Statement from the American Association for Cancer Research and the American Society of Clinical Oncology". Clinical Cancer Research. 21 (3): 514–525. doi:10.1158/1078-0432.CCR-14-2544. ISSN 1078-0432. PMID 25573384.
71. Jovanovic, Mirjana; Jakovljevic, Mihajlo (2015). "Regulatory Issues Surrounding Audit of Electronic Cigarette Charge Composition". Frontiers in Psychiatry. 6: 133. doi:10.3389/fpsyt.2015.00133. ISSN 1664-0640. PMC 4585293. PMID 26441694.
72. Glasser, Allison M.; Collins, Lauren; Pearson, Jennifer L.; Abudayyeh, Haneen; Niaura, Raymond S.; Abrams, David B.; Villanti, Andrea C. (2016). "Overview of Electronic Nicotine Delivery Systems: A Systematic Review". American Journal of Preventive Medicine. 52 (2): e33–e66. doi:10.1016/j.amepre.2016.10.036. ISSN 0749-3797. PMC 5253272. PMID 27914771.
73. Evans, Sarah E.; Hoffman, Allison C. (2014). "Electronic cigarettes: abuse liability, topography and subjective effects". Tobacco Control. 23 (suppl 2): ii23–ii29. doi:10.1136/tobaccocontrol-2013-051489. ISSN 0964-4563. PMC 3995256. PMID 24732159.
74. ^ McNeill 2015, p. 65.
75. ^ WHO 2016, p. 3.
76. Stratton 2018, p. Summary, CONSTITUENTS; Conclusion 3-1.; 4.
77. Gaur, Sumit; Agnihotri, Rupali (2018). "Health Effects of Trace Metals in Electronic Cigarette Aerosols—a Systematic Review". Biological Trace Element Research. 188 (2): 295–315. doi:10.1007/s12011-018-1423-x. ISSN 0163-4984. PMID 29974385. S2CID 49695221.
78. ^ Burstyn, Igor (2014). "Peering through the mist: systematic review of what the chemistry of contaminants in electronic cigarettes tells us about health risks". BMC Public Health. 14 (1): 18. doi:10.1186/1471-2458-14-18. ISSN 1471-2458. PMC 3937158. PMID 24406205.
79. McNeill 2018, p. 150.
80. Chapman 2015, p. 6.
81. ^ Benowitz, Neal L.; Fraiman, Joseph B. (2017). "Cardiovascular effects of electronic cigarettes". Nature Reviews Cardiology. 14 (8): 447–456. doi:10.1038/nrcardio.2017.36. ISSN 1759-5002. PMC 5519136. PMID 28332500.
82. ^ Weaver, Michael; Breland, Alison; Spindle, Tory; Eissenberg, Thomas (2014). "Electronic Cigarettes". Journal of Addiction Medicine. 8 (4): 234–240. doi:10.1097/ADM.0000000000000043. ISSN 1932-0620. PMC 4123220. PMID 25089953.
83. Collaco, Joseph M.; McGrath-Morrow, Sharon A. (2017). "Electronic Cigarettes: Exposure and Use Among Pediatric Populations". Journal of Aerosol Medicine and Pulmonary Drug Delivery. 31 (2): 71–77. doi:10.1089/jamp.2017.1418. ISSN 1941-2711. PMC 5915214. PMID 29068754.
84. Rowell, Temperance R.; Tarran, Robert (2015). "Will chronic e-cigarette use cause lung disease?". American Journal of Physiology. Lung Cellular and Molecular Physiology. 309 (12): L1398–L1409. doi:10.1152/ajplung.00272.2015. ISSN 1040-0605. PMC 4683316. PMID 26408554.
85. ^ Sleiman, Mohamad; Logue, Jennifer M.; Montesinos, V. Nahuel; Russell, Marion L.; Litter, Marta I.; Gundel, Lara A.; Destaillats, Hugo (2016). "Emissions from Electronic Cigarettes: Key Parameters Affecting the Release of Harmful Chemicals". Environmental Science & Technology. 50 (17): 9644–9651. Bibcode:2016EnST...50.9644S. doi:10.1021/acs.est.6b01741. hdl:11336/105702. ISSN 0013-936X. PMID 27461870. S2CID 31872198.
86. Lestari, Kusuma S.; Humairo, Mika Vernicia; Agustina, Ukik (11 July 2018). "Formaldehyde Vapor Concentration in Electronic Cigarettes and Health Complaints of Electronic Cigarettes Smokers in Indonesia". Journal of Environmental and Public Health. 2018: 1–6. doi:10.1155/2018/9013430. ISSN 1687-9805. PMC 6076960. PMID 30105059.
87. Muthumalage, T; Friedman, MR; McGraw, MD; Ginsberg, G; Friedman, AE; Rahman, I (3 April 2020). "Chemical Constituents Involved in E-Cigarette, or Vaping Product Use-Associated Lung Injury (EVALI)". Toxics. 8 (2): 25. doi:10.3390/toxics8020025. PMC 7355865. PMID 32260052.
88. Sassano, MF; Davis, ES; Keating, JE; Zorn, BT; Kochar, TK; Wolfgang, MC; Glish, GL; Tarran, R (March 2018). "Evaluation of e-liquid toxicity using an open-source high-throughput screening assay". PLOS Biology. 16 (3): e2003904. doi:10.1371/journal.pbio.2003904. PMC 5870948. PMID 29584716.
89. Czégény Z, Nagy G, Babinszki B, Bajtel Á, Sebestyén Z, Kiss T, Csupor-Löffler B, Tóth B, Csupor D (April 2021). "CBD, a precursor of THC in e-cigarettes". Scientific Reports. 11 (1): 8951. Bibcode:2021NatSR..11.8951C. doi:10.1038/s41598-021-88389-z. PMC 8076212. PMID 33903673.
90. Hage, R; Fretz, V; Schuurmans, MM (September 2020). "Electronic cigarettes and vaping associated pulmonary illness (VAPI): A narrative review". Pulmonology. 26 (5): 291–303. doi:10.1016/j.pulmoe.2020.02.009. PMID 32553826. S2CID 219904968.
91. Angerer V, Moosman B, Franz F, Auwärter V (2015). "5F-cumyl-PINACA in 'e-liquids' for electronic cigarettes – A new type of synthetic cannabinoid in a trendy product" (PDF). Retrieved 14 June 2018.
92. ^ Callahan-Lyon P (2014). "Electronic cigarettes: human health effects". Tobacco Control. 23 (Supplement 2): ii36–ii40. doi:10.1136/tobaccocontrol-2013-051470. ISSN 0964-4563. PMC 3995250. PMID 24732161.
93. "To vape or not to vape? The RCGP position on e-cigarettes". Royal College of General Practitioners. 2016.
94. Knorst, Marli Maria; Benedetto, Igor Gorski; Hoffmeister, Mariana Costa; Gazzana, Marcelo Basso (2014). "The electronic cigarette: the new cigarette of the 21st century?". Jornal Brasileiro de Pneumologia. 40 (5): 564–572. doi:10.1590/S1806-37132014000500013. ISSN 1806-3713. PMC 4263338. PMID 25410845.
95. ^ Cai, Hua; Wang, Chen (2017). "Graphical review: The redox dark side of e-cigarettes; exposure to oxidants and public health concerns". Redox Biology. 13: 402–406. doi:10.1016/j.redox.2017.05.013. ISSN 2213-2317. PMC 5493817. PMID 28667909.
96. Wadgave U, Nagesh L (2016). "Nicotine Replacement Therapy: An Overview". International Journal of Health Sciences. 10 (3): 425–435. doi:10.12816/0048737. PMC 5003586. PMID 27610066.
97. ^ McNeill 2015, p. 72.
98. Bullen, Christopher (2014). "Electronic Cigarettes for Smoking Cessation". Current Cardiology Reports. 16 (11): 538. doi:10.1007/s11886-014-0538-8. ISSN 1523-3782. PMID 25303892. S2CID 2550483.
99. Glantz, Stanton A.; Bareham, David W. (January 2018). "E-Cigarettes: Use, Effects on Smoking, Risks, and Policy Implications". Annual Review of Public Health. 39 (1): 215–235. doi:10.1146/annurev-publhealth-040617-013757. ISSN 0163-7525. PMC 6251310. PMID 29323609. This article incorporates text by Stanton A. Glantz and David W. Bareham available under the CC BY 4.0 license.
100. ^ Marsot A, Simon N (March 2016). "Nicotine and Cotinine Levels With Electronic Cigarette: A Review". International Journal of Toxicology. 35 (2): 179–185. doi:10.1177/1091581815618935. ISSN 1091-5818. PMID 26681385. S2CID 12969599.
101. ^ Dagaonkar RS, Udwadi ZF (2014). "Water pipes and E-cigarettes: new faces of an ancient enemy" (PDF). Journal of the Association of Physicians of India. 62 (4): 324–328. PMID 25327035. Archived from the original (PDF) on 2016-03-04. Retrieved 2015-07-14.
102. Reuther, William J.; Brennan, Peter A. (2014). "Is nicotine still the bad guy? Summary of the effects of smoking on patients with head and neck cancer in the postoperative period and the uses of nicotine replacement therapy in these patients". British Journal of Oral and Maxillofacial Surgery. 52 (2): 102–105. doi:10.1016/j.bjoms.2013.11.003. ISSN 0266-4356. PMID 24315200.
103. Criscitelli, Kristen; Avena, Nicole M. (2016). "The neurobiological and behavioral overlaps of nicotine and food addiction". Preventive Medicine. 92: 82–89. doi:10.1016/j.ypmed.2016.08.009. ISSN 0091-7435. PMID 27509870.
104. ^ Qasim, Hanan; Karim, Zubair A.; Rivera, Jose O.; Khasawneh, Fadi T.; Alshbool, Fatima Z. (2017). "Impact of Electronic Cigarettes on the Cardiovascular System". Journal of the American Heart Association. 6 (9): e006353. doi:10.1161/JAHA.117.006353. ISSN 2047-9980. PMC 5634286. PMID 28855171.
105. Zhao, D; Aravindakshan, A; Hilpert, M; Olmedo, P; Rule, AM; Navas-Acien, A; Aherrera, A (March 2020). "Metal/Metalloid Levels in Electronic Cigarette Liquids, Aerosols, and Human Biosamples: A Systematic Review". Environmental Health Perspectives. 128 (3): 36001. doi:10.1289/EHP5686. PMC 7137911. PMID 32186411.
106. Kaisar, Mohammad Abul; Prasad, Shikha; Liles, Tylor; Cucullo, Luca (2016). "A Decade of e-Cigarettes: Limited Research & Unresolved Safety Concerns". Toxicology. 365: 67–75. doi:10.1016/j.tox.2016.07.020. ISSN 0300-483X. PMC 4993660. PMID 27477296.
107. ^ Farsalinos, Konstantinos; Voudris, Vassilis; Poulas, Konstantinos (2015). "Are Metals Emitted from Electronic Cigarettes a Reason for Health Concern? A Risk-Assessment Analysis of Currently Available Literature". International Journal of Environmental Research and Public Health. 12 (5): 5215–5232. doi:10.3390/ijerph120505215. ISSN 1660-4601. PMC 4454963. PMID 25988311.
108. ^ McNeill 2018, p. 161.
109. Stratton 2018, p. Summary Annex; Conclusion 5-4.; 18.
110. ^ Bhatnagar A, Whitsel LP, Ribisl KM, Bullen C, Chaloupka F, Piano MR, Robertson RM, McAuley T, Goff D, Benowitz N (24 August 2014). "Electronic Cigarettes: A Policy Statement From the American Heart Association" (PDF). Circulation. 130 (16): 1418–1436. doi:10.1161/CIR.0000000000000107. PMC 7643636. PMID 25156991. S2CID 16075813.
111. Jenssen, Brian P.; Boykan, Rachel (2019). "Electronic Cigarettes and Youth in the United States: A Call to Action (at the Local, National and Global Levels)". Children. 6 (2): 30. doi:10.3390/children6020030. ISSN 2227-9067. PMC 6406299. PMID 30791645. This article incorporates text by Brian P. Jenssen and Rachel Boykan available under the CC BY 4.0 license.
112. Farsalinos, Konstantinos; LeHouezec, Jacques (2015). "Regulation in the face of uncertainty: the evidence on electronic nicotine delivery systems (e-cigarettes)". Risk Management and Healthcare Policy. 8: 157–67. doi:10.2147/RMHP.S62116. ISSN 1179-1594. PMC 4598199. PMID 26457058.
113. ^ Stratton 2018, p. Metals, 199.
114. ^ Rom, Oren; Pecorelli, Alessandra; Valacchi, Giuseppe; Reznick, Abraham Z. (2014). "Are E-cigarettes a safe and good alternative to cigarette smoking?". Annals of the New York Academy of Sciences. 1340 (1): 65–74. Bibcode:2015NYASA1340...65R. doi:10.1111/nyas.12609. ISSN 0077-8923. PMID 25557889. S2CID 26187171.
115. ^ Stratton 2018, p. Evidence Review: Results, 598.
116. Dagaonkar RS, Udwadi ZF (2014). "Water pipes and E-cigarettes: new faces of an ancient enemy" (PDF). Journal of the Association of Physicians of India. 62 (4): 324–328. PMID 25327035. Archived from the original (PDF) on 2016-03-04. Retrieved 2015-07-14.
117. Konstantinos E. Farsalinos; I. Gene Gillman; Stephen S. Hecht; Riccardo Polosa; Jonathan Thornburg (16 November 2016). Analytical Assessment of e-Cigarettes: From Contents to Chemical and Particle Exposure Profiles. Elsevier Science. pp. 25–26. ISBN 978-0-12-811242-7.
118. ^ Stratton 2018, p. Metals, 200.
119. Orellana-Barrios, Menfil A.; Payne, Drew; Mulkey, Zachary; Nugent, Kenneth (2015). "Electronic cigarettes-a narrative review for clinicians". The American Journal of Medicine. 128 (7): 674–81. doi:10.1016/j.amjmed.2015.01.033. ISSN 0002-9343. PMID 25731134.
120. Bhatnagar, Aruni (2016). "Cardiovascular Perspective of the Promises and Perils of E-Cigarettes". Circulation Research. 118 (12): 1872–1875. doi:10.1161/CIRCRESAHA.116.308723. ISSN 0009-7330. PMC 5505630. PMID 27283531.
121. Kleinstreuer, Clement; Feng, Yu (2013). "Lung Deposition Analyses of Inhaled Toxic Aerosols in Conventional and Less Harmful Cigarette Smoke: A Review". International Journal of Environmental Research and Public Health. 10 (9): 4454–4485. doi:10.3390/ijerph10094454. ISSN 1660-4601. PMC 3799535. PMID 24065038.
122. ^ Farsalinos, Konstantinos; Voudris, Vassilis; Poulas, Konstantinos (2015). "Table 1: Exposure to metals from electronic cigarette use in comparison with regulatory safety limits from the primary analysis (assuming 20 m3 and 8.3 m3 respiratory volumes in 24-h and 10-h respectively); all values are in μg". International Journal of Environmental Research and Public Health. 12 (5): 5215–5232. doi:10.3390/ijerph120505215. PMC 4454963. PMID 25988311. This article incorporates text by Konstantinos E. Farsalinos, Vassilis Voudris, and Konstantinos Poulas available under the CC BY 4.0 license.
123. Farsalinos, Konstantinos; Voudris, Vassilis; Poulas, Konstantinos (2015). "Are Metals Emitted from Electronic Cigarettes a Reason for Health Concern? A Risk-Assessment Analysis of Currently Available Literature – Results: Table 1". International Journal of Environmental Research and Public Health. 12 (5): 5215–5232. doi:10.3390/ijerph120505215. PMC 4454963. PMID 25988311.
124. Zainol Abidin, Najihah; Zainal Abidin, Emilia; Zulkifli, Aziemah; Karuppiah, Karmegam; Syed Ismail, Sharifah Norkhadijah; Amer Nordin, Amer Siddiq (2017). "Electronic cigarettes and indoor air quality: a review of studies using human volunteers" (PDF). Reviews on Environmental Health. 32 (3): 235–244. doi:10.1515/reveh-2016-0059. ISSN 2191-0308. PMID 28107173. S2CID 6885414.
125. Staal, Yvonne C.M.; van de Nobelen, Suzanne; Havermans, Anne; Talhout, Reinskje (2018). "New Tobacco and Tobacco-Related Products: Early Detection of Product Development, Marketing Strategies, and Consumer Interest". JMIR Public Health and Surveillance. 4 (2): e55. doi:10.2196/publichealth.7359. ISSN 2369-2960. PMC 5996176. PMID 29807884. This article incorporates text by Yvonne CM Staal, Suzanne van de Nobelen, Anne Havermans, and Reinskje Talhout available under the CC BY 4.0 license.
126. Stratton 2018, p. TABLE 5-6, Volatile Compounds Detected in E-Cigarette Aerosol; 188.
127. Shields, Peter G.; Berman, Micah; Brasky, Theodore M.; Freudenheim, Jo L.; Mathe, Ewy A.; McElroy, Joseph; Song, Min-Ae; Wewers, Mark D. (2017). "A Review of Pulmonary Toxicity of Electronic Cigarettes In The Context of Smoking: A Focus On Inflammation". Cancer Epidemiology, Biomarkers & Prevention. 26 (8): 1175–1191. doi:10.1158/1055-9965.EPI-17-0358. ISSN 1055-9965. PMC 5614602. PMID 28642230.
128. WHO 2016, p. 2.
129. Ramôa CP, Eissenberg T, Sahingur SE (2017). "Increasing popularity of waterpipe tobacco smoking and electronic cigarette use: Implications for oral healthcare". Journal of Periodontal Research. 52 (5): 813–823. doi:10.1111/jre.12458. ISSN 0022-3484. PMC 5585021. PMID 28393367.
130. Jankowski, Mateusz; Brożek, Grzegorz; Lawson, Joshua; Skoczyński, Szymon; Zejda, Jan (2017). "E-smoking: Emerging public health problem?". International Journal of Occupational Medicine and Environmental Health. 30 (3): 329–344. doi:10.13075/ijomeh.1896.01046. ISSN 1232-1087. PMID 28481369.
131. ^ Stratton 2018, p. 196, Other Toxicants, Furans.
132. Lødrup Carlsen, Karin C.; Skjerven, Håvard O.; Carlsen, Kai-Håkon (2018). "The toxicity of E-cigarettes and children's respiratory health". Paediatric Respiratory Reviews. 28: 63–67. doi:10.1016/j.prrv.2018.01.002. ISSN 1526-0542. PMID 29580719. S2CID 4368058.
133. Wang, Guanghe; Liu, Wenjing; Song, Weimin (2019). "Toxicity assessment of electronic cigarettes". Inhalation Toxicology. 31 (7): 259–273. Bibcode:2019InhTx..31..259W. doi:10.1080/08958378.2019.1671558. ISSN 0895-8378. PMID 31556766. S2CID 203439670.
134. "Electronic Cigarettes – What is in e-cigarette aerosol?" (PDF). Centers for Disease Control and Prevention. 22 February 2018.
135. Palazzolo, Dominic L. (November 2013). "Electronic cigarettes and vaping: a new challenge in clinical medicine and public health. A literature review". Frontiers in Public Health. 1 (56): 56. doi:10.3389/fpubh.2013.00056. PMC 3859972. PMID 24350225. This article incorporates text by Dominic L. Palazzolo available under the CC BY 3.0 license.
136. Beard, Emma; Shahab, Lion; Cummings, Damian M.; Michie, Susan; West, Robert (2016). "New Pharmacological Agents to Aid Smoking Cessation and Tobacco Harm Reduction: What Has Been Investigated, and What Is in the Pipeline?". CNS Drugs. 30 (10): 951–983. doi:10.1007/s40263-016-0362-3. ISSN 1172-7047. PMID 27421270. S2CID 40411008.
137. ^ Drummond MB, Upson D (February 2014). "Electronic cigarettes. Potential harms and benefits". Annals of the American Thoracic Society. 11 (2): 236–242. doi:10.1513/annalsats.201311-391fr. PMC 5469426. PMID 24575993.
138. Sanford Z, Goebel L (2014). "E-cigarettes: an up to date review and discussion of the controversy". W V Med J. 110 (4): 10–15. PMID 25322582.
139. Thirión-Romero, Ireri; Pérez-Padilla, Rogelio; Zabert, Gustavo; Barrientos-Gutiérrez, Inti (2019). "Respiratory Impact of Electronic Cigarettes and Low-Risk Tobacco". Revista de investigación Clínica. 71 (1): 17–27. doi:10.24875/RIC.18002616. ISSN 0034-8376. PMID 30810544. S2CID 73511138.
140. ^ Stratton 2018, p. 195, Other Toxicants.
141. Wilder 2016, p. 84.
142. Neuberger, Manfred (2015). "The electronic cigarette: a wolf in sheep's clothing". Wiener Klinische Wochenschrift. 127 (9–10): 385–387. doi:10.1007/s00508-015-0753-3. ISSN 0043-5325. PMID 26230008. S2CID 10172525.
143. Huang, Shu-Jie; Xu, Yan-Ming; Lau, Andy T. Y. (2017). "Electronic cigarette: A recent update of its toxic effects on humans". Journal of Cellular Physiology. 233 (6): 4466–4478. doi:10.1002/jcp.26352. ISSN 0021-9541. PMID 29215738. S2CID 3556795.
144. Syamlal, Girija; Jamal, Ahmed; King, Brian A.; Mazurek, Jacek M. (2016). "Electronic Cigarette Use Among Working Adults — United States, 2014". MMWR. Morbidity and Mortality Weekly Report. 65 (22): 557–561. doi:10.15585/mmwr.mm6522a1. ISSN 0149-2195. PMID 27281058.
145. ^ Hildick-Smith, Gordon J.; Pesko, Michael F.; Shearer, Lee; Hughes, Jenna M.; Chang, Jane; Loughlin, Gerald M.; Ipp, Lisa S. (2015). "A Practitioner's Guide to Electronic Cigarettes in the Adolescent Population". Journal of Adolescent Health. 57 (6): 574–9. doi:10.1016/j.jadohealth.2015.07.020. ISSN 1054-139X. PMID 26422289.
146. McNeill 2018, p. 159.
147. Wilder 2016, p. 82.
148. "Deeming Tobacco Products To Be Subject to the Federal Food, Drug, and Cosmetic Act, as Amended by the Family Smoking Prevention and Tobacco Control Act; Restrictions on the Sale and Distribution of Tobacco Products and Required Warning Statements for Tobacco Products". Federal Register. 81 (90). United States Food and Drug Administration: 28974–29106. 10 May 2016.
149. Collaco, Joseph M. (2015). "Electronic Use and Exposure in the Pediatric Population". JAMA Pediatrics. 169 (2): 177–182. doi:10.1001/jamapediatrics.2014.2898. PMC 5557497. PMID 25546699.
150. ^ Palazzolo, Dominic L. (November 2013). "Studies involving chemical analysis of e-cigarette cartridges, solutions, and mist". Frontiers in Public Health. 1 (56): 56. doi:10.3389/fpubh.2013.00056. PMC 3859972. PMID 24350225. This article incorporates text by Dominic L. Palazzolo available under the CC BY 3.0 license.
151. ^ Cheng T (2014). "Table 2: Aldehydes reported in refill solutions and aerosols of e-cigarettes". Tobacco Control. 23 (Supplement 2): ii11–ii17. doi:10.1136/tobaccocontrol-2013-051482. ISSN 0964-4563. PMC 3995255. PMID 24732157.
152. ^ Tashkin, Donald (2015). "Smoking Cessation in Chronic Obstructive Pulmonary Disease". Seminars in Respiratory and Critical Care Medicine. 36 (4): 491–507. doi:10.1055/s-0035-1555610. ISSN 1069-3424. PMID 26238637. S2CID 207870513.
153. Bourke, Liam; Bauld, Linda; Bullen, Christopher; Cumberbatch, Marcus; Giovannucci, Edward; Islami, Farhad; McRobbie, Hayden; Silverman, Debra T.; Catto, James W.F. (2017). "E-cigarettes and Urologic Health: A Collaborative Review of Toxicology, Epidemiology, and Potential Risks" (PDF). European Urology. 71 (6): 915–923. doi:10.1016/j.eururo.2016.12.022. hdl:1893/24937. ISSN 0302-2838. PMID 28073600.
154. Dinakar, Chitra; Longo, Dan L.; O'Connor, George T. (2016). "The Health Effects of Electronic Cigarettes". New England Journal of Medicine. 375 (14): 1372–1381. doi:10.1056/NEJMra1502466. ISSN 0028-4793. PMID 27705269.

External links

• E-liquid Database—A Center for Tobacco Regulatory Science and Lung Health project, funded by NIH/FDA

• Electronic cigarettes
• Aerosols
• IARC Group 1 carcinogens
• IARC Group 2A carcinogens
• IARC Group 2B carcinogens
• Tobacco smoke carcinogens